Scribd
Upload
85 views30 pages

SCRD and Socketweld

Calculate the following fitting makeups: 1. 2" socket weld 90 degree elbow: - 2" x SCH 40 pipe - 3000# forged steel elbow 2. 1-1/2" screwed cap: - 1-1/2" x SCH 40 pipe - 150# malleable iron cap 3. 2" reducing tee: - 2" x SCH 40 run - 1-1/2" x SCH 40 branch - 3000# forged steel tee 4. 1" gate valve: - 1" x SCH 40 pipe - 125# cast iron valve

Uploaded by

Theo Seriye
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
85 views30 pages

SCRD and Socketweld

Calculate the following fitting makeups: 1. 2" socket weld 90 degree elbow: - 2" x SCH 40 pipe - 3000# forged steel elbow 2. 1-1/2" screwed cap: - 1-1/2" x SCH 40 pipe - 150# malleable iron cap 3. 2" reducing tee: - 2" x SCH 40 run - 1-1/2" x SCH 40 branch - 3000# forged steel tee 4. 1" gate valve: - 1" x SCH 40 pipe - 125# cast iron valve

Uploaded by

Theo Seriye
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 30

Socket Weld & Screwed

Fittings
1. BECOME FAMILIAR WITH THE DIFFERENT TYPES
OF FITTINGS AND HOW THEY ARE USED.

2. KNOW FITTING REPRESENTATION FOR PIPING


PLAN DRAWING AND PIPING ISOMETRIC.

3. CALCULATE SCREWED AND SOCKTWELD


FITTING MAKEUP CONFIGURATION.

LESSON OBJECTIVES:
Socketweld and Screwed fittings function primarily
the same as buttweld fittings but differ in the method
of joining and dimensioning.

Normally used in sizes 2” and smaller piping


systems.

Usually classified as “Field Fab”

INTRODUCTION:
FITTING PRESSURE CLASS

 Threaded Fittings
(Air and Water Services)

125# Cast Iron


250# Cast Iron  Socket Weld Fittings
150# Malleable Iron (for Added Strength)

300# Malleable Iron 3000# Forged Steel


 Threaded Fittings 6000# Forged Steel
(High Pressure and/or High Temperature)

2000# Forged Steel


3000# Forged Steel
6000# Forged Steel
SOCKETWELD FITTINGS:

FITTINGS HAVE DEEP SOCKETS, WHICH THE PIPE


SLIPS INTO AND ALIGNS ITSELF. (Advantage:
Eliminates special clamps or tack welding for
alignment prior to final fitup weld.)

THE WELD IS THEN MADE ON THE OUTER


SURFACE OF THE PIPE AND FITTINGS. (Advantage:
Prevents weld material from entering the bore.)
MAJORITY OF SCREWED FITTINGS WILL HAVE
FEMALE (INTERNAL) THREADS PER “NPT”
(NATIONAL PIPE THREAD).

EXCEPTIONS WILL BE SWAGES AND PLUGS


WHICH WILL HAVE MALE (EXTERNAL) THREADS.

SCREWED FITTINGS:
Socket-End Connections

*1/16” GAP IS TO PREVENT THE


WELD FROM CRACKING
UNDER THERMAL STRESS.

Screwed-End Connections

**SEAL-WELDING IS REQUIRED
FOR THREADED JOINTS IN
HYDROGEN LETHAL AND
TOXIC SERVICES.

NOTE:
THREAD COMPOUND IS REQUIRED.
UNLESS CONNECTION IS TO BE SEAL-
WELDED.
FITTING TYPES:

•ELLS
•TEES
•COUPLING
•SWAGE
•THREDOLET
•SOCKOLET
•CAP
•PLUG
•UNION
Fitting Chart:
2” And Smaller
Fitting Chart:
2-1/2” And Larger
Fitting Chart: Valves
90 Degree Elbow
SCREWED SOCKET WELDED

* SEE DIMENSION CHART FOR DIMENSIONS-PER RATING


**SEE CATALOG FOR DIMENSIONS
FITTING SYMBOLS
PIPING PLAN PIPING ISOMETRIC
PIPE NIPPLE:

A short piece of pipe used to connect two SW


or SCW’D fittings together.

Comes in set lengths

A common use is to maintain the minimum


required distance between fittings. (Distance is
required for wrench or welding clearance.)
Minimum distance is 2” but we will use a
minimum 3” Long Nipple between fittings as a rule
for this class.
45 Degree Elbow

SCREWED SOCKET WELDED

* SEE CATALOG FOR DIMENSIONS


FITTING SYMBOLS

PIPING PLAN PIPING ISOMETRIC


Tee
SCREWDED SOCKET WELDED

*SEE DIMENSION CHART FOR ** SEE CATALOG FOR DIMENSIONS


DIMENSIONS - PER RATING

FITTING SYMBOLS
PIPING PLAN PIPING ISOMETRIC

***
***

ALWAYS CALL OUT REDUCING TEE SIZES


*** ON ISOMETRIC AND PLAN VIEWS.
(RUN X BRANCH : 2” X 1” )
TEES
Couplings
USED TO JOIN PIPE TO PIPE OR PIPE TO SWAGE
SCREWED SOCKET WELDED

* SEE DIMENSION CHART FOR DIMENSIONS - PER RATING


*
** SEE CATALOG FOR DIMENSIONS

FITTING SYMBOLS
PIPING PLAN PIPING ISOMETRIC
Coupling Installation
Coupling Application
Swage
USED TO WHENEVER REDUCTION IS REQUIRED TO OR FROM SOCKET-
WELD OR SCREWED FITTINGS (ONE END MAY BE FOR BUTTWELDING).

CONCENTRIC:

* SEE DIMENSION CHART FOR DIMENSION


** RULE OF THUMB: ONE-HALF THE DIFFERENCE
OF THE OUTSIDE DIAMETERS

ECCENTRIC:

VARIOUS END FACINGS: NOTE:


•PLAIN END (PE) MAY BE OBTAINED WITH A COMBINATION
OF THESE FACINGS:
•THREAD END (TE) BLE TSE
•BEVEL END (BE) TLE BSE
BBE
Concentric And Eccentric Swages:

PIPING PLAN IN PLAN INDICATE


BF OR TF IF SWAGE
IS ECCENTRIC.
(SIZE NOT REQUIRED)

*CALLOUTS REQUIRED
PIPING ISOMETRIC ON DRAWINGS

CALLOUTS:
• SIZE
• BF/TF
• OFFSET
DIMENSION
Threadolets & Sockolets:

USED TO MAKE A 90° BRANCH CONNECTION ON 2” AND LARGER


HEADERS SCREWED SOCKET WELDED

SEE CATALOG FOR DIMENSIONS

FITTING SYMBOLS
PIPING PLAN PIPING ISOMETRIC
Threadolet Or Sockolet Installation
Cap

SCREWED SOCKET WELDED

*SEE CATALOG FOR DIMENSIONS

FITTING SYMBOLS
PIPING PLAN PIPING ISOMETRIC
Plugs

*SEE CATALOG FOR DIMENSIONS

FITTING SYMBOLS

PIPING PLAN PIPING ISOMETRIC


Union

SCREWED SOCKET WELDED

* SEE DIMENSION CHART FOR DIMENSIONS - PER RATING


** SEE CATALOG FOR DIMENSIONS

FITTING SYMBOLS
PIPING PLAN PIPING ISOMETRIC
Unions: Used For
Dismantling:
Socket Weld Fitting &
Valve Make-up
Screwed Fitting &
Valve Make-up
EXERCISE:

You might also like