Scribd
Upload
92 views

SINCGARS Operations SOP

The document provides steps for configuring a SINCGARS radio. The 11 steps include: 1) Turning the control switch to load; 2) Cycling through volume, channel, power, mode, and COMSEC settings; 3) Clearing the zeros to enter a frequency; 4) Storing the frequency; 5) Verifying the configured settings are displayed correctly; and 6) Turning the radio on and setting it to PA or high frequency. The steps provide detailed instructions for essential radio configuration and setup.

Uploaded by

Andrew Marsh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
92 views

SINCGARS Operations SOP

The document provides steps for configuring a SINCGARS radio. The 11 steps include: 1) Turning the control switch to load; 2) Cycling through volume, channel, power, mode, and COMSEC settings; 3) Clearing the zeros to enter a frequency; 4) Storing the frequency; 5) Verifying the configured settings are displayed correctly; and 6) Turning the radio on and setting it to PA or high frequency. The steps provide detailed instructions for essential radio configuration and setup.

Uploaded by

Andrew Marsh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Step 5: Push your MENU/CLR button to cycle to the next setting: POWER.

With the
***************** THE NEXT STEPS ARE VERY IMPORANT *******************
power setting shown, push button 7/CHG to cycle to PA. Your screen will show
SINCGARS Operations Standard Operating POWER=PA when this is complete.
 
Step 8: Push the top right button FREQ and then quickly push the bottom left
Procedure (SOP) button MENU/CLR to clear the zero’s off the screen to enter your frequency.
 
168TH Engineer Brigade
09JUN2020
168th Engineer Brigade will utilize the following SINCGARS radio
frequencies:
i. FREQ HOP – Frequency hop or encrypted
ii. SCPT – Single channel plain text
168th Engineer Brigade SOI
SECTION NET ID (FREQ HOP) NET ID (SCPT)
CMD TBP TBP
HHC/168th EN BDE TBP TBP
HHC/223rd EN BN TBP TBP
HHC/890th EN BN TBP TBP
A. LOAD RADIO
Step 1: Turn your control switch to LD. Step 6: Push your MENU/CLR button to cycle to the next setting: MODE.
Step 2: Press the bottom left button, MENU/CLR, to cycle to the first option: Push your 7/CHG button to cycle to the SC setting. Your screen will show
VOLUME. MODE=SC.
Step 3: With the word VOLUME on the screen, push the #9 button. Step 9: While your screen displays “_ _ _ _ _ “ enter the frequency given to
Your screen will show: VOLUME=9 you and press the 2 nd button from the right on the bottom row, STO to store
your new frequency. If done correctly, the screen will now display your
frequency.
 
Step 10: If all steps are done correctly, your screen will look like this:

Step 4: Push your MENU/CLR button to cycle to the next setting: CHANNEL. Your Step 7: Push your MENU/CLR button to cycle to your next setting: COMSEC.
display should read: CHANNEL=1. If it does not, PRESS 1 and it will show: Push your 7/CHG button to cycle to PT. Your screen will show COMSEC=PT.
CHANNEL=1.

Step 11: Turn your control switch to ON and proceed to talk.


 
i. Always set radio to PA or HIGH frequency.

You might also like