Scribd
Upload
51 views

Implementation CSFB in MSC Op

This document provides instructions for implementing Circuit Switched Fallback (CSFB) in the MSC operator XXX network to allow voice and SMS services over the existing circuit switched infrastructure for subscribers attached to both the EPS and circuit switched domains. It describes activating the necessary licenses in the MSC, adding an MME entity and integrating it with the MSC via SGs interface links, and checking the link status and performance after integration to ensure CSFB is functioning properly.

Uploaded by

GeorgeCsx
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
51 views

Implementation CSFB in MSC Op

This document provides instructions for implementing Circuit Switched Fallback (CSFB) in the MSC operator XXX network to allow voice and SMS services over the existing circuit switched infrastructure for subscribers attached to both the EPS and circuit switched domains. It describes activating the necessary licenses in the MSC, adding an MME entity and integrating it with the MSC via SGs interface links, and checking the link status and performance after integration to ensure CSFB is functioning properly.

Uploaded by

GeorgeCsx
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 18

03/19/2023 Security Level:

Implementation CSFB in MSC Operator XXX

Department: Malaysia TAC


Employee Name/ID: Abdul Basir Mukri / a84236656
Date: 30-09-2022

www.huawei.com

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential


References:
• MSOFTX3000 Product Documentation
• User Manual

• Typical Signaling Flow user manual

• Appendix – Protocol compliance

• SGs Interface Protocol


Objective:
Upon complementation this course, you should be able to:
• Understand in general about the CSFB for voice and sms
• Describe the signaling flow for SGs interface
Content:
1. Chapter 1 Overview
1.1. Background
1.2. Requirement
2. Chapter 2 Integration Procedure
2.1. General Step of Integration
2.2. Details Step of Integration
2.2.1. Activate license in MSC that already support for CSFB
2.2.2. ADD MME entity and Integration between MSC and MME
3. Chapter 3 Post Status Checking
3.1. Check status Link
3.2. Performance Check
Content:
1. Chapter 1 Overview
1.1. Background
1.2. Requirement
2. Chapter 2 Integration Procedure
2.1. General Step of Integration
2.2. Details Step of Integration
2.2.1. Activate license in MSC that already support for CSFB
2.2.2. ADD MME entity and Integration between MSC and MME
3. Chapter 3 Post Status Checking
3.1. Check status Link
3.2. Performance Check
Content:

1. Chapter 1 Overview
1.1. Background
• Now in Operator XXX network already implementation 4G technology (LTE) for
data service, this need for customer satisfaction in use data service. During
implementation 4G technology we need implement CSFB for cover CS service
domain like voice, sms.
• The Circuit Switched Fallback (CS Fallback) feature enables carriers to reuse the
circuit switched (CS) infrastructure to provide voice services for the subscribers
who are attached to both evolved packet system (EPS) and the CS domain.
Content:
CSFB Basic Call Flow
Content:
CSFB Short Message Flow
Content:
 Below topology for implementation CSFB based region, for detail can open file attachment.
Operator XXX LTE_CSFB
Topology
Existing VAS

OCS SMSC USSD


VoiceMail OCS_4G PCRF_4 Billing
HSS G Center
S6a
C/D Bi

Gy Gx
B link
STP STP CG Internet

MSC Pool

A B C D SGW PGW
MME 1 FW
S1-MME

LA1 LA1
LA1
TA1 LA1
TA1

LA1
LA1
TA1
LA1
LA1
TA1

AREA
Content:
1. Chapter 1 Overview
1.2. Requirement
• Open CS Fallback and SGs short message license control item in MSC
• Integration between MSC and MME (SGS Link interface)
• Design mapping LAI and TAI
• Software parameter in MSC for make same protocol configuration between
MSC & MME
Content:
1. Chapter 1 Overview
1.1. Background
1.2. Requirement
2. Chapter 2 Integration Procedure
2.1. General Step of Integration
2.2. Details Step of Integration
2.2.1. Activate license in MSC that already support for CSFB
2.2.2. ADD MME entity and Integration between MSC and MME
3. Chapter 3 Post Status Checking
3.1. Check status Link
3.2. Performance Check
Content:
2. Chapter 2 Integration Procedure
2.1. General Step of Integration
Below the step for CSFB implementation:
• Activate license in MSC that already support for CSFB.
• ADD MME entity that will integrate with this MSC.
• Make Link between MSC & MME (SGS interface link).
Content:
2. Chapter 2 Integration Procedure
2.2. Details Step of Integration

2.2.1 Activate license in MSC that already support for CSFB

We must activate new license that already support CSFB feature. License we will get from marketing.

• Script for activation License


• ACT LICENSE: FN=" xxx.dat", LT=BOTH;
Content:
2. Chapter 2 Integration Procedure
2.2. Details Step of Integration
2.2.2. ADD MME entity and Integration between MSC and MME
We need integration between MSC and MME that will use for CSFB

• ///SCRIPT FOR MSC A///


• /* MOC = MME */
• ADD MME: MMENM="MME 1", MMEN="460000800101", VLRN=K'861310752154, IFSTARTFECNFLOWCTRL=NOSTART,
MOG="PUBLIC";
• 
• /* MOC = SGSSCTPLNK */
• ADD SGSSCTPLNK: MN=1400, LNKNM="SGS_MSCA_TO_MME1_0", ADDRTYPE=IPV4, LOCIP1="172.31.200.63", LOCPORT=29118,
PEERIP1="172.31.200.43", PEERPORT=29118, CS=S, MMENM="MME 1", PRI=0, MAXIS=16, MAXOS=16, COT=80, CDT=40,
RTOMIN=500, RTOMAX=1500, RTOINIT=500, HBINTER=1500, MAXASSOCRETR=10, MAXPATHRETR=5,
TRNSFERMODE=MAX_BANDWIDTH, QOS=TOS, TOS=MIN_COST, PTHMODE=NOCROSSPATH; ";
Content:
1. Chapter 1 Overview
1.1. Background
1.2. Requirement
2. Chapter 2 Integration Procedure
2.1. General Step of Integration
2.2. Details Step of Integration
2.2.1. Activate license in MSC that already support for CSFB
2.2.2. ADD MME entity and Integration between MSC and MME
3. Chapter 3 Post Status Checking
3.1. Check status Link
3.2. Performance Check
Content:
3. Chapter 3 Post Status Checking
3.1. Check status Link
After integration MSC to MME, we must make sure Link already UP.
DSP MME:;
DSP SGSSCTPLNK: QUERYTYPE=BYMME, MMENM="MME 1";
Content:
3. Chapter 3 Post Status Checking
3.2. Performance Check
We need some performance check to make sure CSFB running normally
for:
• Number of SGs Subscribers in VLR
• SGs Combined IMSI Attached Success Rate
• SGs Combined Normal Location Updates Success Rate
• LTE SMMO Success Rate
• LTE SMMT Success Rate

You might also like