Topic 1.1 Basic Concepts of Computer Network
Topic 1.1 Basic Concepts of Computer Network
NETWORKING
1.1 Basic Concepts of Computer
Networks
FP303 COMPUTER
NETWORK
[email protected]
Learning Outcomes
• Describe advantages of networking
• Describe the characteristic of two types of networks
• Describe the various classification of networks
• List the elements common to all client/server networks
• Describe the various computer network topologies
• Compare the characteristics of the different network
topologies
• State the organizations that set standards for
networking
What is Network?
• A combination of computer hardware, cabling,
network devices and computer software that
allows computers to communicate with each
other.
• The goal of any network is to allow computers
to communicate.
• Communication examples: web browser, AIM,
text messaging, email
Advantages of Comp. Network
• Data Exchange
• Hardware Resource Sharing
Peer to Peer
Network
Peer to Peer (P2P) Network (cont…)
• P2P members usually perform similar tasks, sharing
of resources. Support 10 computers. Users of P2P is
located in the same geographical area
File Server
Other
equipment
Client Server Network (cont…)
Advantages of a client/server network
• SERVER
– Servers are the computers that provide the shared resources to network
users
• SEGMENT
– A segment is a specially-configured subset of a larger network. The
ways of increasing available bandwidth on the LAN
• TOPOLOGY
– A topology is a arrangement of a network, including its nodes and
connecting lines. Network geometry: 1) Physical topology 2) Logical
(or signal) topology.
• TRANSMISSION MEDIA
– The physical or nonphysical means through which data is
transmitted and received across the network. Example: Wire and
cables, radio waves
Two categories
of network topology are:
TOPOLOGY
TREE MESH
Bus Topology
• It is a multipoint topology.
• One long cable acts as a backbone to link all
the devices in the network.
Ring Topology
• Each device has a dedicated point-to-point line
configuration.
• Message will be passed to each device until it
reach the destination
Star Topology
Each device has a dedicated point-to-point link only
to a central controller.
It does not allow direct traffic between devices.
Mesh Topology
• A mesh topology provides redundant communication
paths between some or all devices .
Full Mesh
Partial Mesh
Tree Topology
A tree topology integrates the star and bus
topologies in a hybrid approach to improve network
scalability.
Hybrid Topology
• The combination of two or more topologies.
Consideration to Choose Topology
• Money. A linear bus network may be the least
expensive way to install a network; you do not have
to purchase concentrators.
• Length of cable needed. The linear bus network uses
shorter lengths of cable.
• Future growth. With a star topology, expanding a
network is easily done by adding another
concentrator.
• Cable type. The most common cable is unshielded
twisted pair, which is most often used with star
topologies.
• Stability
Type of Cable, Protocol & Speed
Topology Cable Speed Protocol
Twisted Pair,
Bus, Star, Tree 10 Mbps Ethernet
Coaxial, Fiber
Twisted Pair,
Star 100 Mbps Fast Ethernet
Fiber
REPEATER
• HUB / SWITCH
– Centralizing connection for all network devices (LAN only)
– Sending packets using MAC address
HUB
SWITCH
Function of Hardware (cont…)
• ROUTER - Forwarding packets in the network using MAC
and IP address (INTERNET)
ROUTER
Function of Hardware (cont…)
• BRIDGE - Connecting two or • GATEWAYS - a device that acts
more different networks for as a ‘MAIN PATH’ for all network
communication traffics.
• “Gate” to the Internet.
BRIDGE
GATEWAYS
EXERCISE
Question No 1
• Form a group (2-3 person in group)
• Q1: List an advantages and disadvantages of network
topologies below:
TOPOLOGY
TREE MESH
Question No 2
• Q2: Explain about basic hardware in computer network.
1. Repeater
2. Switch
3. Hub
4. Router
5. Bridge
6. Access Point / Wireless Router
Question No 3
• Q3: Explain the function of standard networking
organization?