Scribd
Upload
378 views

Conduction Through Composite Walls

Conduction is a mode of heat transfer through direct contact of objects where heat flows from warmer objects to cooler ones via molecular interaction. The rate of heat transfer by conduction depends on the thermal conductivity of the material, the temperature difference across it, and the area through which heat is flowing. Materials with high thermal conductivity are good conductors while insulators have low conductivity. Building materials are measured using their R-value, which represents the thickness divided by the thermal conductivity. Heat transfer through composite walls can be calculated using Fourier's Law applied to each layer in series. Examples are provided to demonstrate calculating heat transfer rates through composite walls.

Uploaded by

Niño Gerard Jabagat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
378 views

Conduction Through Composite Walls

Conduction is a mode of heat transfer through direct contact of objects where heat flows from warmer objects to cooler ones via molecular interaction. The rate of heat transfer by conduction depends on the thermal conductivity of the material, the temperature difference across it, and the area through which heat is flowing. Materials with high thermal conductivity are good conductors while insulators have low conductivity. Building materials are measured using their R-value, which represents the thickness divided by the thermal conductivity. Heat transfer through composite walls can be calculated using Fourier's Law applied to each layer in series. Examples are provided to demonstrate calculating heat transfer rates through composite walls.

Uploaded by

Niño Gerard Jabagat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 15

Heat

Transfer:
Conduction
Conduction is a mode of heat transfer in
which heat is transferred by molecular
interaction through bodies in contact.

2
Conduction
✗ Heat conduction can be visualized as occurring through
molecular collisions.
✗ The heat flow per unit time is given by:

(14-5)

3
✗ The constant k is called the thermal conductivity.
✗ Materials with large k are called conductors; those with
small k are called insulators.

4
Building materials are measured using R−values rather
than thermal conductivity:

Here, is the thickness of the material.

6
2. Conduction through composite
plane walls
✗ For composite wall shown in the figure, if the heat flows in series first through one slab and then another, Furrier's
equation can be applied as:
𝑘 𝐴 𝐴(𝑇𝐴 −𝑇𝐵 )
𝑄 𝐴=
𝑥𝐴
𝑘 𝐵 𝐴(𝑇𝐵 −𝑇𝐶)
𝑄 𝐵=
𝑥𝐵
TA TB
𝑘 𝐶 𝐴(𝑇𝐶 − 𝑇𝐷 )
𝑄 𝐶= TC
𝑥𝐶
TD = 36
=

Q = QA = QB = QC
(for steady state heat transfer)

7
Conduction through composite wall
Examples:

8
1. A vertical furnace wall is made up of an inner wall of firebrick 20
cm thick followed by insulating brick 15 cm thick and an outer wall of
steel 1cm thick. The surface temperature of the wall adjacent to the
combustion chamber is 1250°C while that of the outer surface of steel
is 75°C. The insulating conductivities of the wall material in W/m-K
are: firebrick, 10; insulating brick, 0.26; and steel, 45. Neglecting the
film resistance and contact resistances of joints, determine the heat loss
per square meter of the wall area in kJ/s-m².

9
2. One side of refrigerated cold chamber is 6m long by 3.7 m high and
consists of 168 mm thickness of cork between outer and inner walls of
wood. The outer wood wall is 30 mm thick and its outside face
temperature is 20°C. The inner wood wall is 35mm thick and its inside
face temperature is -3°C. taking the coefficient of thermal conductivity
of cork and wood as 0.42 and 0.20 W/m-K respectively. Calculate the
heat transfer per second per square meter area.

11
12
13
Thanks
!
Any questions?

15

You might also like