No. 1 Sims Lane One Sims Lane #05-05 Singapore 387355 Phone: 65-6743-4476 Fax: 65-6743-4576 www.mycom.com.sg [email protected].

sg

5 Phase Stepper Motor Driver Motion Controllers

2 Phase Stepper Motor Driver

LSI Pulse Generator

Training Kits Encoder

Brief Introduction on MYCOM

MYCOM, INC.
 A Leading manufacturer in the field of Motion Control  Producer of Pulse Generator Chips  Patented The Five-Phase Star Bi-Polar FiveBiStepper Drives Control  An Active member in the field of Fuzzy Control  World 1st to achieve 500,000 equi-step per equirevolution with our NanoDrive

MYCOM, INC.
Estd. MTS Singapore office Estd. Nyden Corp USA office Estd. MKI Korea office Estd. MTI Taiwan office Fuzzy Work Station Estd. MYCOM Brand Started Stepping Motor Established Jun. Jul. Feb. Jul. Mar. Aug. Apr. Nov. 1991 1990 1990 1989 1989 1983 1977 1968

Industries Covered
Semiconductor Industry Disk Drives Industry Electronics Industry Automation Industry Automotive Industry Process Industry Food Industry Medical Industry Research & Development Industry

Mycoms Products

Under Mycoms Products

5 Phase Star Bi-polar Drive Stepping Motor and Drivers 2 Phase Stepping Motors and Drivers Nano Drive driver for both 2 & 5 phase stepping motor Programmable Motion Controllers - 1 to 4 Axes - Stand Alone - PC Based Indexers and Pulse Generators Cam Controllers Pulse Generator LSI Chips Motorized Cylinders

Under Mycoms Products

5 Phase Star Bi-polar Drive Stepping Motor and Drivers 2 Phase Stepping Motors and Drivers Nano Drive driver for both 2 & 5 phase stepping motor

Under Mycoms Products

Programmable Motion Controllers
1 to 4 Axes Stand Alone PC Based

Indexers and Pulse Generators Cam Controllers Pulse Generator LSI Chips Motorized Cylinders

Types of Motion Control (Precision Control)

As machines are getting more and more complex, precision control becomes an important factor. Stepper motor for positioning control Servo motor for speed, position control

Usage of Different Types of Motor

General Purpose  Induction Motor (no torque when motor stop) Positioning Control  Clutch and Brake Motor Speed Control  AC Motor with Inverter  DC Motor with Potential-meter

Usage of Different Types of Motor

Positioning and Speed Control  Stepping Motor (there is holding torque when motor stop moving) Positioning, Speed and Torque Control  Servo Motor (there is holding torque when motor stop moving but hunting)

WHAT IS STEPPER MOTOR?

BASIC PRINCIPLES OF STEPPING MOTOR

A Stepping motor is an electromagnetic actuator which converts digital pulse inputs to analog output of shaft motion. In response to each pulse, shaft rotates through a small fixed angle. Hence, angular position of shaft is proportional to number of inputs pulses.

In other words :The number of input pulses > Position The frequency of pulses > Speed

With Stepper Motor, you are able to control The Position and Speed Accurately.

Advantages of Stepper over Servo

Fast response
Stepper can response to a certain frequency during startup

Even distribution of torque regardless of system inertia e.g CAM Constant rotational speed

MYCOMs Products

PCE series 5-Phase Stepper Motors (CE approved)

Characteristics Five leads for easy wiring configuration High Torque Series with no resonance problems or ripples NEMA Sizes 11, 17, 23 and 34 Highly Cost effective with longtime running warranty Able to reach 500,000 Steps/Revolution with NanoDrive

TG series 5 Phase Stepper motor with Spur Gear

Characteristics Highly cost effective Backlash of about 15 mins Available ratio : 1/7.2, 1/10, 1/20, 1/30.

IMS500 DC 5-Phase Compact-Size Stepper Motor Driver

Characteristics Small size, economical unit 24Vdc supply input Opto-isolated inputs and outputs Auto-current down feature Half-Full step settings

INS500 DC 5-Phase NanoDrive Stepper Motor Driver ( CE rated )

Characteristics Nano Resolutions up to 500,000 Steps/Revolution 16 Different Resolution Modes from 1 Full step to 1/1000th Step 24Vdc supply input Opto-isolated inputs and outputs Achieves and maintains ultra high torque at ultra high speed Auto-current down feature CE rated

IMS50 series 5 Phase Half / Full Step Driver (CE approved)

Characteristics 100~120Vac or 200~220Vac Single Phase Power Input Opto-isolated inputs and outputs Auto-current down feature Half/ Full step setting

IMS51 AC 5-Phase Compact-Size Stepper Motor Driver

Characteristics 100~120VAC or 200~220VAC Single Phase Power Input Ideal driver for optimal torque running step motors Opto-isolated inputs and outputs Auto-current down feature Advanced Half-Full step settings Patented torque chip provides effective heat dissipation CE rated

INS50 AC 5-Phase NanoDrive Stepper Motor Driver

Characteristics Nano Resolution up to 500,000 Steps-aRevolution 16 Different Resolution Modes from 1 Full Step to 1/1000th Step 100~120Vac or 200~220Vac Single Phase Power Input Opto-isolated inputs and outputs Achieves and maintains ultra high torque at ultra high speed Patented Torque Chip provides effective heat dissipation

UPS54 series High Resolution/ High Speed Type 5 Phase Driver

Characteristics Very High Torque in a compact package up to 2000 Steps per Revolution Virtually No low speed resonance Extremely high speed performance

PF 2-Phase High Torque Stepper Motors

Characteristics Six leads for various wiring configurations Wide selection range to suit various applications Highly cost effective Up to 100% higher torque than the 2 phase standard motors Increased Torque Margin Replace a larger motor in the existing applications

PS 2 Phase Standard and High Resolution Stepper Motors

Characteristics Six leads for various wiring configurations High quality bearings to ensure long life Designed fro maximum heat dissipation Highly Cost effective Wide selection range to suit various applications

IMS200 DC 2 Phase Stepper Motor Driver

Characteristics High resolutions (4 different settings) Maximum up to 1,600 steps per revolution = 0.225 Low Vibration Maintain Maximum Torque Input Pulse Selection (Bi-Clock / Gate)

INS200 DC series 2 Phase NanoDrive Stepper Motor Driver

Characteristics High resolution (16 different settings) Max. up to 200,000 steps per revolution Extremely low vibration and no hunting problems Maintain Maximum Torque DC 24 ~ 36V

SND100 series 2 Phase NanoDrive Stepper Motor Driver

Characteristics Up to 200,000 Steps-perrevolution High Resolutions selection 24Vdc supply input: Simple hook-up and operate technology Extremely low vibration & no hunting problem Maintains high Torque Up to 2.0 A/phase output

IMS20 AC 2 Phase Stepper Motor Driver (CE Approved)

Characteristics Constant current chopper, maximum 2A/phase Motor current shut off signal. Auto current down function. Low power consumption

INS20 series 2 Phase NanoDrive Driver (CE Approved )

Characteristics High resolutions (16 different settings) Divide basic step angle 1.8/full step into proportions ranging from 1/1 to 1/1000 Maximum up to 200,000 steps per revolution (1/1000 stepping mode) = 0.0018per step Extremely low vibration and no Hunting Problems Maintain Maximum Torque

LSI Pulse Generator

DMP2042 Chip Series Highly advanced QFP Chip for an eclectic variety of Design Protocols. Ultra compact at 0.5mm. Specific built-in functions for various Motion Control applications. Ultra Fine Pulse Rate output.

DMP1040 Chip Series Highly advanced QFP Chip for an eclectic variety of Design Protocols. Ultra compact at 0.5mm. Specific built-in functions for various Motion Control applications. Ultra Fine Pulse Rate output.

LSI Pulse Generator

MPG2011 Pulse Generator Chip Ultra High Speed, Two Axis Pulse Generator Chip. Executes Trapezoidal , Triangular as well as Velocity movement profiles. Designed for Steppers and Digital Input Servos. Starting point for Deceleration can be calculated automatically.

MPG2031 Pulse Generator Chip operates two axes of motion control for steppers and digital servos. Able to compose an S-curve, trapezoidal, or other complex move profiles for linear or circular interpolation positioning. 100-pin QFT with a 0.5-mm lead pitch for surface-mount applications.

LSI Pulse Generator

MPG1020 2 Axis Pulse Generator Chip, Ultra High Speed MPG1032 Single Axis Pulse Generator Chip Single axis control S-curve feature Performs Trapezoidal , Triangular and Velocity movement profiles. DSP type peripheral circuit with built-in functions. For 2 Axes Stepping motors or Digital Input Servo motors. Address and Data commands sent directly to Chip. Able to compose Trapezoidal , Triangular well as Velocity movement profiles for Open loop applications.

LSI Pulse Generator

MPG1010 Single Axis Pulse Generator Chip, Ultra High Speed LSI type peripheral circuit Single Axis Chip to Control the Motion of Stepping or Digital Input Servo Motors Capable of modify the Acceleration and Deceleration rates Reaches Trapezoidal , Triangular and Velocity profiles for Point to Point applications. Ultra High Speed Pulse Rate output up to 8.0 Mhz.

Encoder
MGH 1000 Rotary encoder for PS44x/PF44x/PS54x/PF54x motors
1000 ppr Incremental type Phase A, B and Z open collector or line receiver output available Maximum 200KHz frequency response

EC-F56x-10 Rotary encoder for PF56x/ PCE56xx motors

1000 ppr Incremental Type Phase A, B and Z open collector or line receiver output available Maximum 200KHz frequency response

EC-F59x-10P Rotary encoder for PF59x/ PCE59xx motors 1000 ppr Incremental Type Phase A, B and Z open collector output available Maximum 60KHz frequency response

Multi-Axis Standalone Controllers SNC240/SNC440 Motion Controllers

Characteristics Standalone Used for Point-to-Point control and Linear Interpolation of the general purpose motion systems S-Curve, Trapezoidal as well as Complex motion profiles can be defined High Speed Pulse Rate outputs up to 1.638 Mhz. Multi-tasking feature available

MLH20-1030 PCI-Bus Mechatrolink Interface Controller Card

Characteristics 1-Channel PCI-Compliant MECHATROLINK Controller Card. For High-End Stepper and Servo Units and I/O Network. Users easily connect the number of systems they require, and can add any Mechatrolink-compatible I/O modules. Advanced Network eliminates analog conversions; hence saving money and simplifying system process setup time. Low cost.

MCC-0400 PCI bus Hi-Speed Controller Card

Characteristics Suited for stepper and servo motors Compact 10016020mm and 190 g. suited for most desktop computers and industrial PCs. Ultra Flexibility and High-Speed provides Pinnacle Running Performance. Mycoms in-house designed and patented Digital Motion Process, the DMP1040, Included for Advanced Running Performance.

MCI-0410 4 Axes PCI bus Controller card

Characteristics Designed to drive stepping motors or pulse train input servo motors Each axes comes with complete sensor/ encoder inputs eliminating the need for additional high speed input counter card. PCI bus type

PPC-2310 3 Axes ISA bus Controller card

Characteristics Designed to drive stepping motors or pulse train input motor. Each axes comes with complete sensor/ encoder inputs eliminating the need for additional high speed input counter card ISA bus type

PPC-2410 4 Axes ISA bus Controller card

Characteristics Designed to drive stepping motors or pulse train input servo motors Each axes comes with complete sensor/ encoder inputs eliminating the need for additional high speed input counter card ISA bus type

MNC-100 Single Axis Indexer Unit

Characteristics Simple control by direct position entry LCD Display with simple key entry Pre-stored up to 15 Positions Individual speed selection for each position possible Up to 10 different pre-set speed setting External trigger single axis controller Each pre-stored position can be selected individually Automatic sequential position start possible Built-in Home Function available External Emergency Stop available

ECM-011 Single Axis Electronic CAM Controller

Characteristics Pre-stored up to 32 CAM Shape S-curve Acceleration/Deceleration Profile RS232C Communication 256 Steps, 32 Programs can be Prestored Multi-tasking for Simple PLC Functions Special User Routine available when Emergency Develops SLIM Design ( 160 x 85 x 25 mm )

SNC-110 Single Axis Stepper Motion Controller

Characteristics Single Axis stand-alone controller RS232 communication port Daisy chain up to 8 controller On-line mode control Simple programming using Terminal Software 5 inputs and 4 outputs

PLG-101 Stepping Motor Drive Oscillator

Characteristics Two adjustable speeds: Trigger/ Level speed and Scan speed Adjustable Start/ Stop speed, Acceleration/ Deceleration Rate Switchable Analog Input Single power supply 8 to 24Vdc

MCI-0410 4 Axes PCI bus Controller card

Characteristics Designed to drive stepping motors or pulse train input servo motors Each axes comes with complete sensor/ encoder inputs eliminating the need for additional high speed input counter card. PCI bus type

MLH20-1030 PCI-Bus Mechatrolink Interface Controller Card

Characteristics Maximum of 30 channels for optimum flexibility and design achievability MECHATROLINK II ensures simple correspondence of equipment design and programming control One controller board controls most advanced equipment. Capable of controlling a variety of Stepper Motors or Servo Motors No complicated wirings are necessary Management of a complete link of MECHATROLINK programming group and equipment is possible within the simple execution of motion parameters and programs.

PLG-101 Stepping Motor Drive Oscillator

Characteristics Two adjustable speeds: Trigger/Level speed & Scan speed Adjustable Start/Stop speed Adjustable Acceleration/Declaration Rate Switchable Analog Input Opto-isolated Pulse and Direction outputs Level Start, Trigger Start, and Scan Start inputs opto-isolated Level Stop and Trigger Stop inputs optoisolated Single Power Supply: (8~24Vdc) Dimension: 3" x 3" x 1"

Stepper Motor Motion Control Instruments

Characteristics In-line style saves space Over 1,389 oz-in running torque at 60 rpm and above Up to 20,000 steps of true resolution High cost effective

Optical Incremental Shaft Encoders

Characteristics Hollow type ( saves mounting space ) Direct mounting to PEE or PF54x series motors 1000 pulse per revolution Incremental Type Phase A, B and Z open collector or line driver output available Maximum 150KHz frequency response

PULMORE EC series
Characteristics Optimal Motorized cylinder for a variety of design applications. Multiple positions. Space saving design capability. High resolution up to 0.005mm

RV-500 5-Axes Robot

Characteristics Simple Individually controlled 5 axes Robot Small size and light weight ( 13Kg ) Arm Length of up to 275mm Load Capacity up to 300g Repeatability 0.1mm Electric driven gripper 35mm stroke

Example use for: Wafer/Disc Transport , Welding , Hazardous Material Handling , Medical Equipment

PMS20 and PMS26 Automated Actuator Movement Series

Characteristics Advanced Automated Stage System for linear and multi-directional applications. Simple hookup and wiring for operating 1-Axis or additional modes to operate multi-Axes. Extremely lightweight and compact. Ultra-smooth precision movements executed by simple programming.

MR-300-A06 Advanced Gantry System with Z axis laser gantry detection

Characteristics Fine-Pitch laser movement achieves optimal resolution with virtually no vibration. Each movement of axis speed reaches 0.1 to 300 mm/second. High-Technology exclusively incorporates Mycoms patented NanoDrive stepper to reach a nano-positioning speed of up to 500,000 Steps/Rev. Ideal for a variety of laser marking or related applications.

Example use in: IC Handlers, Punch Press, Medical Equipment

Mark-Myte 2101 and Robotic Stamping Machine Series

Characteristics Optimal Robotic Stamping Machine, Standalone. Automatically Stamps Characters & Symbols with Ultra Precision. 125 (W) x 70 (D) mm

CMS-100 USB Microprocessor Motion Controller

Characteristics USB 2.0 supporting Stepper Motor Controller Communicates with the computer using MYCIS II software. able to execute Point-to-Point, Trapezoidal and Triangular movements with optimal smoothness and time-efficiency. plug-and-play system that offers straightforward, time-efficient controlling action. 14 Exclusive Input/Outputs Input voltage 100V-240V AC

Headoffice Japan Mycom, Inc 12, S. Shimobano, Saga Hirosawa, Ukyo, Kyoto 616, Japan www.mycom-japan.co.jp

U.S.A Nyden Corporation 2610-B North First St. #B San Jose, CA. 95134 www.nyden.com

Singapore Mycom Technology (Singapore) Pte Ltd No. 1 Sims Lane One Sims Lane #05-05 Singapore 387355 www.mycom.com.sg Korea Mycom Korea, Inc Em 301, Keum Chang Building, #328-1, 6Ka, Dang-san-Dong Yeoungdungpo-ku, Seoul, Korea www.mycom-korea.co.kr

Taiwan Mycom Technology, Inc 2 Fl, No.333, Fushin North Road Taipei Taiwan, R.O.C. www.mycom-taiwan.com