EK 896
•MADE BY - ROHDE AND SCHWARZ (GERMANY)
•TOT WITH BEL HS 496
•TYPES RACK 4/5 SINGLE UNITS
•FAMILY EK 890
•REPLACE HF RX IN ALL UNITS
•PROCESSERBASED CONTROL SOFTWARE DRIVEN, MENU
DRIVEN SUITABLE FOR COMMUNICATIONS AND EW
PURPOSE. MILL 88 STD. COMPATIBLE FOR DATA
COMMUNICATION
EK 896
•FREQUENCY 10 KHZ – 30 MHZ
COVERAGE
•RESOLUTION 1 HZ
•BAND WIDTH ± 7.5 - 8 KHZ
DATA > 1 MHZ
•SENSITIVITY -104 TO -127 dbm
•CONTROL TYPES M, A, DIGITAL AND COMBINATION
M/A/A+M/A+D
•DEMODULATION - AM FAX FM
CW FSK ISB
USB AFSK
LSB DUPLEX
TELEGRAPHY(F7B)
DATALINK
- FSK/ASK - OFFSET
- BAUD RATE UPTO
600 BPS)
- POLARITY ATTN.
•TEMPERATURE - 25 TO +55
•MTBF - > 14000 h
•MEMORY - 1000 CHANNEL COMPLETE SETUP
•TUNING TIME - < 10 mS
MAIN COMPONENTS
•POWER UNIT
•PROCESSOR
•SYNTHESIZER
•CONTROL UNIT
•IF/AF UNIT
•DIGITAL SELECTION MODULE FK 896
POWER UNIT
•100 – 240 V AC
•TEMPERATURE CUT OFF
GENERATES + 5 V + 15 V DC FOR INTERNAL USE
PROCESSOR
•16 BIT MICRO PROCESSOR
•64 K X 16 BIT EPROM
•32 K X 16 BIT RAM
CONTROL FEATURES
(a) SETTING AND MANAGING MODULE FUNCTIONS
(b) EXTERNAL COMMUNICATION BY PANEL CONTROL
AND DATA INTERFACE
(c) EXECUTES INTERNAL PROGRAMS
(d) NON VOLATILE STORAGE OF ALL SETTINGS
(e) CONTINUOUS TESTING OF CPU, RAM, EPROM
FUNCTIONS
(f) SYNTHESIZER MONITORING
SYNTHESIZER
• 10 MHz CRYSTAL OSC
•FREQUENCY DIVIDERS AT VCOs
CONTROL UNIT
(a) BASIC SETTINGS - FREQ, BW, BFO,MODE, GC
PASSBAND, DIGITAL THRESHOLD
(b) SEARCH OPERATION - FREQ/CHANNEL
HOLD TIME/DWELL TIME/STOP
(c) BITE - CRITERION
(d) SYSTEM FUNCTIONING - SOFTWARE VERSION/OPTIONS/
ERROR MESSAGE/SIGNAL LEVEL/
DEVIATION
(e) CHANNEL OPERATION - STORE/ERASE/SELECT/READ/
MANILPULATE
(f) SPECIAL OPERATION - MASTER – SLAVE OPERATION
- COMPLETE MEMORY ERASING
IF/AF UNIT
- DSP CONTROLLED
(a) IF FILTERING IN BW - 150 – 8 KHZ
(b) CONTROL TYPES & TIME - AGC MGC DGC
(c) BAUD RATE AND DEVIATION FREQUENCY SETTING FOR
FSK/AFSK
(d)NOISE BLANKING OF PULSE SHAPED INTERFERANCES AT
ANTENNA INPUT
(e) NOTCH FILTER - 2 FILTERS - 5 TO + 5 KHz, 10 Hz STEP
(f) SYLLABIC SQUELCH PASSBAND FILTER TUNING
DIGITAL SELECTION MODULE FK 896
•50 MHz LOW PASS FILTER -- TUNING TIME - <10 MS
COMPUTER
PRINTER/ETP
RS 232 – RS 485
MODES OF OPERATION
(a) MANUAL
(b) FREQUENCY SCANNING – START/STOP/STEP/DIGITAL
TRESHOLD/DWELL/HOLD
(c) CHANNEL SCANNING - FIXED CH. SCANNING
CHANEL CALL UP & START/STOP/DWELL/HOLD
SCANNING
EDITTING CHANNEL DATA
(d) CHANNEL SCANNING WITH FREE PROGRAMMABLE
CHANNEL LIST (20)
CHANNEL LIST/DWELL/HOLD
FEATURES - EK 896
• SWITCHABLE
PREAMP, DOUBLE NOTCH FILTER, NOISE BLANKER,
PASSBAND TUNING, DATALINK,
•SPECIAL FSK/AFSK MARK AND SPACE FILTER MATCHED TO SELECTED
SHIFT
•DIGITAL DATA O/P – UPTO 38.4 Kbps
•POWER CONSUMPTION VERY LOW
•MICRO PROCESSOR FOR BUS, INTERFACING, MENU AND PROGRAMS
•INTEGRATED SELF TEST TO MODULE LEVEL WITH PL RESULT DISPLAY
•FRONT PANEL/REMOTE CONTROL – MASTER/SLAVE OPERATION OF
UPTO 99 RECEIVERS USING LINE DRIVERS. CODING SWITCH IS TO SET
99 ADDRESSEES
FEATURES - EK 896 (CONTD.)
• OPERATABLE BY PRINTER/ETP/FRONT PANEL
•FREQUENCY/CHANNEL SCAN MODE
•WELL ORGANISED AND MENU DRIVEN PROGRAMMING OF RECEIVER
SETTINGS
•PASSWORD PROTECTED CHANNEL PROTECTION
•VOICE, DATA, COMINT APPLICATION
•DYNAIMC RANGE HIGH, LOW SYNTHESIZER NOISE, HIGH GAIN
CONTROL RANGE
