Scribd
Upload
55 views

Prelim Lecture 1 - Introduction To Electronics

This document provides an introduction to basic electronics concepts related to power supplies. It outlines learning objectives about electronics parameters, semiconductor biasing conditions, and characteristic curves. It then discusses what a power supply is, the types of power needed for projects, fundamental power supply principles, and basic electronic components used in power supply circuits. Circuit diagrams are provided to illustrate half-wave rectification, full-wave rectification, and bridge rectification. Equations are also presented for output voltage, surge current, voltage regulation, ripple rejection, and source resistance.

Uploaded by

cool kid
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
55 views

Prelim Lecture 1 - Introduction To Electronics

This document provides an introduction to basic electronics concepts related to power supplies. It outlines learning objectives about electronics parameters, semiconductor biasing conditions, and characteristic curves. It then discusses what a power supply is, the types of power needed for projects, fundamental power supply principles, and basic electronic components used in power supply circuits. Circuit diagrams are provided to illustrate half-wave rectification, full-wave rectification, and bridge rectification. Equations are also presented for output voltage, surge current, voltage regulation, ripple rejection, and source resistance.

Uploaded by

cool kid
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 11

ME 3106

Basic Electronics
CHAPTER 1
Introduction to Basic Electronics

Engr. Edison M. Bengco, PECE, MEP – ECE


UPHSD - CALAMBA
For any comment and suggestion [email protected]
Cell no. 09258468709
Learning Outcomes
1. Familiarize to Electronics parameters
2. Knowing Electronics law of attraction & repulsion
3. See and observed the biasing condition of a
semiconductor.
4. Experiencing to plot and sketch characteristics
curve.
What we're going to learn today:
1.) What is power supply?
2.) What kind of power is needed for these projects?
3.) What are the fundamental principles of power supply?
4.) What are the basic electronic components used in
power supply circuits?
5.) How do these principles combine to
make interesting things?
 6.) We're going to make some of those things, and you
can take the kit, and the projects home with you.
Power Supply Block Diagram

4
Half-Wave Rectifier
Kirchhoff's Voltage Law @ loop1 during
positive half cycle:
Diode is forward biased therefore an
output waveform was established
V

Kirchhoff's Voltage Law @ loop2 during


negative half cycle:
Diode is reversed biased therefore no
output waveform was induced

t
5
Full-Wave Rectifier
Kirchhoff's Voltage Law @ loop1 during
positive half cycle:
Diode 1 is forward biased while diode 2
is reversed biased therefore an output
V waveform was established

Kirchhoff's Voltage Law @ loop2 during


negative half cycle:
Diode 1is reversed biased but diode 2 is
forward biased therefore an output
waveform was established

6
Bridge-Type Rectifier
Kirchhoff's Voltage Law @ loop1 during
positive half cycle:
Do the same method.......

V
Kirchhoff's Voltage Law @ loop2 during
negative half cycle:
Do the same method.......

7
More Equations . . .
Rearranging the previous equations: VP = Vdc + 1.736 Vr
The ripple voltage as a percentage of the dc voltage is:

Vr
% ripple  x100
Vdc
The diode(s) must be rated to withstand the surge current:

VP where RW is the transformer winding’s


I surge  resistance given by:
RW VNL  VFL
RW 
I FL
Other Specifications
A common definition for voltage regulation is:
VNL  VFL
Voltage regulation (%)  x100
VFL
The ability to reduce the output ripple voltage is:
Vr ( out )
Ripple rejection (dB)  20 log
Vr ( in )
Vo
Source resistance of regulator is: Rs   or m
I L
THANK YOU!

You might also like