Scribd
Upload
192 views17 pages

Baseband5212&5216 Integrat Ion

This document provides instructions for integrating Baseband 5212 and 5216 software using a semi-automatic integration process. It outlines the necessary pre-requisites like scripts, templates, and software packages. It then describes setting up a client PC for the integration and accessing the auto-integration tool webpage. Finally, it lists the steps to download and install software updates, run configuration scripts, and perform post-integration checks.

Uploaded by

Hai Le
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
192 views17 pages

Baseband5212&5216 Integrat Ion

This document provides instructions for integrating Baseband 5212 and 5216 software using a semi-automatic integration process. It outlines the necessary pre-requisites like scripts, templates, and software packages. It then describes setting up a client PC for the integration and accessing the auto-integration tool webpage. Finally, it lists the steps to download and install software updates, run configuration scripts, and perform post-integration checks.

Uploaded by

Hai Le
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 17

BASEBAND5212&5216 INTEGRAT

ION
Pre-requisite
Category Item Format Comment
Netconf RbsSummary File Netconf (xml)
(XML) SiteBasic Template Netconf (xml)
Script
SiteEquipment Template Netconf (xml)
TN Template Netconf (xml)
RN Template Netconf (xml)
MOS Feature Activation Script Moshell (.mos)
Script Post Integration Script Moshell (.mos)
Cell Relation Script Moshell (.mos)
UP Upgrade Package (UP) ZIP
LKF License Key File (LKF) XML
PC Client PC
Cable Ethernet Cable Baseband LMT - PC
Pre-requisite
› Baseband5216 should be installed in RBS6601 and shoul
d be power on.

› Scripts and UP package prepared and stored in Client PC


› SFTP Server installed in Client PC

› Cygwin and moshell for latest version


PNG image
Client PC Setup (1)
› Client PC connects to Baseband5216 LMT port

› Set Client PC IP address


- IP Address : 169.254.2.1
- Subnet mask : 255.255.0.0
- Default gateway : 169.254.2.2
Client PC Setup (2)
› Stop Symantec Management

› Stop firewall
Right click the icon of Symantec and waiting until ‘Disabl
ed Symantec Endpoint Protection’ available to click
Client PC Setup (3)
› Client PC SFTP Server Setting
- IP Address : 169.254.2.1
- Username : ftp
- Password : ftp

› Save integration files (XML, UP, MOS) to SFTP HOME Di


rectory

› Turn on SFTP Server

Microsoft
PowerPoint Presentation
Semi auto-integration(pre-check)
› Check following from “xxx_RbsSummaryFile.xml” XML sc
ript
Semi auto-integration
› Auto-Integration Tool Page
Recommand explorer: google chrome
- Tool Web Page : https://169.254.2.2:8080 (Before Integration)
https://169.254.2.2/autointegration.html

› https://169.254.2.2 (After Integration)


• Host : 169.254.2.1
• Username : ftp
• Password : ftp
• Site Installation File :
<File_Name>
Semi auto-integration
› Click ‘Downloading Files’ (finish within 10 mins)

SW Package Download
success (Finished)

Prepare Filesystem
success (Finished)

Unpack and Install SW


success (Successful)
Semi auto-integration
› After UP Installation, shows ‘Download Completed’ ‘Inte
grate’ button is activated and click it to integrate
Semi auto-integration
› After press “Integrate” button Node will Restart and start integrate
Configuration File
› In case error happens during integration, integration should be sto
pped and board will restore to factory setting. ESI log could be coll
ected for integration failure.

Microsoft
PowerPoint Presentation

› If integration finishes with no error no progress message in Auto-I


ntegration Log
› Wait until TN port LED is ON and access node with moshell to run
scripts.

PNG image
Semi auto-Integration
• After Auto-Integration finishes, logon with moshell. Need to put in
“Username/Password” after “lt all”
Maintenance User Id/Password: “rbs/rbs”

Type rbs/rbs
Run TN/RN Script
• Open an Terminal and run following TN/RN script running comman
ds
• File path should be put in correctly.
ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830
[email protected] –s <TN XML Script File Name>
ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830
[email protected] –s <RN XML Script File Name>

• Command Example
ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830 rbs
@169.254.2.2 -s netconf < 3_eNB12_TN_netconfv2.xml
ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830 rbs
@169.254.2.2 -s netconf < 4_eNB12_RBS6601_RN_netconfv2.xml

Contact DT responsible in case error happens with script running.


Run Post Integration Script
• Logon with moshell and run Post Integration Script
• Run script with following command
run <script_name>

• Run script example


run 5_featureActivation.mos
run 6_PostIntegration.mos
run 7_eutranfreq.mos

• After script running, “lt all” to load new configuration and save CV
cvmk <cv_name>
or
acc BrM=1,BrmBackupManager=1 createBackup

cvmk <cv_name> or acc BrM=1,BrmBackupManager=1 createBackup


Post-Check
• After save CV, Node Cold Restart
acc FieldReplaceableUnit=1 restartUnit

• After node is up, check following with moshell


- Unlock TermPointToMME, EUtranCellFDD
- MME, EUtranCellFDD, Sector, SectorCarrier, Radio Unit Status
- “inv” to check License Status
- Node configuration parameter and System Constant Status
- Alarm Status
- Save CV
Command list for baseband
####### General ########
G1 G2
cvls cvls
st cell st cell
st ru st ru
lh ru lmclist lh ru lmclist
/sysm/discspace
space must be below 80%, otherwise remove logs and
UPs
vols
( use /sysm/discspace –c. But be aware that you then
remove all PMDs. Best is to remove PMDs as soon as
you have disk full alarm. )
get Subrack=1,Slot=1 productData get Equipment=1,FieldReplaceableUnit=1 productData
al al
pst pst
cabx command is currently not supported on COM nodes
hget ^EUtranCellFDD CellIdGroup|SubCellId hget ^EUtranCellFDD CellIdGroup|SubCellId
get . earfcn get . earfcn
Command list for baseband
####### SCTP ######
G1 G2
get . initialAdRecWin get . initARWnd
get . numberOfAssociations sctp -config | grep -i "SCTP_SYS_PAR_NUMBER_OF_ASSOCS"

####### SC #########
G1 G2
fget NodeManagementFunction=1,SystemConstants=1 systConstants sysconread

####### sCell ####### ####### Feature License ########


G1 G2 G1 G2
get . scellc 1 get . scellc 1 inv inv

Microsoft Excel
Worksheet

You might also like