Scribd
Upload
83 views5 pages

Tutorial: Lecture Delivered By: Anusha Vadde

Uploaded by

vaddeanusha203
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
83 views5 pages

Tutorial: Lecture Delivered By: Anusha Vadde

Uploaded by

vaddeanusha203
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Lecture 49

Tutorial
Lecture delivered by: Anusha Vadde

1
Faculty of Engineering & Technology © Ramaiah University of Applied Sciences
Objectives

At the end of this tutorial, student will be able to:


• Calculate the various parameters of universal motor under different
operating condition

2
Faculty of Engineering & Technology © Ramaiah University of Applied Sciences
Problems
• A 120-V, 60-Hz, 2-pole, universal motor operates at a speed of 8000
rpm on full load and draws a current of 17.58 A at a lagging power
factor of 0.912. The impedance of the series field winding is 0.65 +
j1.2 Ω. The impedance of the armature winding is 1.36 + j1.6 Ω.
Determine (a) the induced emf in the armature, (b) the power
output, (c) the shaft torque, and (d) the efficiency if the rotational
loss is 80 W
• A 240-V, 50-Hz,2- pole, universal motor operates at a speed of
12000 rpm on full load and draws a current of 6.5 A at 0.94 pf
lagging. The motor parameters are Ra = 6.15 Ω, Xa = 9.4 Ω, Rs= 4.55
Ω, and Xs = 3.2 Ω. Calculate (a) the induced emf of the motor, (b)
the shaft torque, and (c) the efficiency if the rotational loss is 65 W

3
Faculty of Engineering & Technology © Ramaiah University of Applied Sciences
Contd…

• If the motor of above slide draws a current of 12.81 A at 0.74 pf


lagging when its load is increased, determine the operating speed
of the motor. Assume that the motor is operating in the linear
region.

4
Faculty of Engineering & Technology © Ramaiah University of Applied Sciences
Summary

• A universal motor works on either DC or single phase AC supply


• Transformer operating on lagging power factor gives positive
voltage regulation
• Speed/load characteristics of a universal motor is similar to that of
DC series motor
• The speed of a universal motor is low at full load and very high at
no load. Usually, gears trains are used to get the required speed on
required load

5
Faculty of Engineering & Technology © Ramaiah University of Applied Sciences

You might also like