Scribd
Upload
3K views

Rat Tail or Pig Tail. This Kind of Joint Is Y-Splice. This Method of Wrapping Is

This document provides information on common wire splices and joints used in electrical installation, including the rat tail splice, Y-splice, knotted tap, plain tap joint, aerial tap, duplex cross joint, Western Union short-tie splice, Western Union long tie splice, wrapped tap joint, and cross joint. It also discusses extension cords and the importance of choosing one that can safely handle the power load by looking for Department of Trade and Industry markings.

Uploaded by

Brix Lebita
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
3K views

Rat Tail or Pig Tail. This Kind of Joint Is Y-Splice. This Method of Wrapping Is

This document provides information on common wire splices and joints used in electrical installation, including the rat tail splice, Y-splice, knotted tap, plain tap joint, aerial tap, duplex cross joint, Western Union short-tie splice, Western Union long tie splice, wrapped tap joint, and cross joint. It also discusses extension cords and the importance of choosing one that can safely handle the power load by looking for Department of Trade and Industry markings.

Uploaded by

Brix Lebita
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 2

COMMON WIRE SPLICES AND JOINTS

Introduction

As a student in Electrical Installation and Maintenance you should acquire the


important knowledge and skills in wire splices and joints and should be familiar with the
actual application of every splice and joint. This will serve as your tool in performing actual
wiring installation. Of course, another factor is the knowledge in interpreting and analyzing
the wiring diagram especially if the circuit is complicated.

The following are the Common Electrical Wire Splices and Joints.

Rat Tail or Pig Tail. This kind of joint is Y-splice. This method of wrapping is
commonly used to join two or more generally used on small cables
conductors inside the junction box. It is because the strands are flexible and
suitable for service where there is no all can be wrapped in one operation.
mechanical stress when wires are to be
connected in an outlet box, switch, or
conduit fitting

Knotted tap. This is used where the tap Plain tap joint. This is used where the
wire is under heavy tensile stress. tap wire is under considerable tensile
stress circuit.

Aerial tap. This is used as a temporary tap Duplex cross joint. This is a two-tap
wire turned simultaneously and is
used

18
usually done in constructions sites. The where the two tap wire is under heavy
easy twist will facilitate tap wire movement tensile stress.

Western Union Short-tie Splice. This is


the most widely used splice or joint in
interior wiring installation to extend the Western Union Long Tie. This is used
length of wire from one point to another. extensively for outside wiring to extend
the length of wire from one end to
another.

Wrapped Tap or Tee Joint. This is


Cross joint. The same application is done
used on large solid conductors where it
as in plain tap and the only difference is
is difficult to wrap the heavy tap wire
that this tap is a combination of two plain
around the main wire.
taps place side by side with each other.

EXTENSION CORD

An extension cord is a span of flexible electrical power cable with a plug on one end
and multiple sockets on the other end. It comes in several varieties to suit the needs of the
user. One of the most important considerations is the power handling capacity to make it safe
and functional.

Electrical gadgets are product of modern technology to make our life better. The
number of electrical gadgets available at home and in offices may exceed the existing
convenience outlet installed in every room. The best remedy to address the insufficiency of
available outlet is to use an extension cord especially if the electrical gadgets need to
operate at the same time.

REMINDER

Be careful in buying an extension cord. You have to look for the Department of Trade
and Industry (DTI) markings. The Product Standard (PS) or Import Commodity Clearance
(ICC) markings on it signify that the product passed the DTI standard for safety and quality.

You might also like