0% found this document useful (0 votes)
111 views

Care of Kitchen Tools and Equipment

Proper care and regular cleaning of kitchen tools and equipment is important to prevent damage and ensure longevity. Small tools should be cleaned after each use with warm water and vinegar, which is an effective disinfectant and grease remover. Tools should be air dried before storing to prevent mold growth. When cleaning kitchen equipment and surfaces, factors like soil levels, contact time, temperature, water quality, and chemical concentrations all influence the cleaning process. Common chemicals used for cleaning kitchen items include detergents, solvents, acids, abrasives, ammonia, dish soap, chlorine, and commercial disinfectants.

Uploaded by

Arls Paler Pia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
111 views

Care of Kitchen Tools and Equipment

Proper care and regular cleaning of kitchen tools and equipment is important to prevent damage and ensure longevity. Small tools should be cleaned after each use with warm water and vinegar, which is an effective disinfectant and grease remover. Tools should be air dried before storing to prevent mold growth. When cleaning kitchen equipment and surfaces, factors like soil levels, contact time, temperature, water quality, and chemical concentrations all influence the cleaning process. Common chemicals used for cleaning kitchen items include detergents, solvents, acids, abrasives, ammonia, dish soap, chlorine, and commercial disinfectants.

Uploaded by

Arls Paler Pia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 19

CARE OF KITCHEN TOOLS AND

EQUIPMENT
• Any kitchen tools and equipment
will last long if given proper care.
• Small tools and equipment such
as paring and butcher knives,
kettles, pots and other tools
should receive regular care by
cleaning and sanitizing them
after using. Warm water will
facilitate removing of grease.
• The use of vinegar added to water
is very good disinfectant and
stain/grease remover.
• Be sure to air dry them before
storing because moist utensils will
attract cockroaches and wet
shelves can develop disagreeable
odor.
FACTORS THAT INFLUENCE THE CLEANING PROCESS

Soil – varying degrees of food soil will be


deposited on the equipment during
production.
Time – the longer a cleaning solution
remains in contact with the equipment
surface, the greater the amount of food
soil that is removed. More time in contact
with the soil reduces the chemical
concentration requirements.
Temperature – soils are affected
by temperature in varying
degrees.
Chemical concentrations – it
varies depending on the chemical
itself, type of food soil, and the
equipment to be cleaned.
Concentration will normally be
reduced as time and temperature
• Water – minerals in hard water can reduce the effectiveness
of some detergents or a sanitizers. Water pH ranges
generally from pH5-8.5. However, highly acidic water may
require additional buffering agents. Water used for cleaning
and sanitizing must be potable and pathogen free.
Chemicals used in cleaning
and sanitizing kitchen tools
and equipment.
Cleaning is the process of
removing food and other types of
soil from a surface , such as a
dish, glass, or cutting board.
-is done with a cleaning agent
that removes food, soil, or
other substances.
Cleaning Compound
1. Detergents. These are cleaning
agents, solvents or any substance
used to wash tablewares,
surfaces, and equipment.

Example: soap, soap powders,


cleaners, acids, volatile solvents and
abrasives.
2. Solvent Cleaners commonly
referred to as degreasers used on
surfaces where grease has burned
on. Ovens and grills are examples
of areas that need frequent
degreasing. These products are
alkaline based and are formulated
to dissolve grease.
3. Acid Cleaners. Used periodically in
removing mineral deposits and other
soils that detergents cannot eliminate
such as scale in washing machines and
steam tables, lime buildup on
dishwashing machines and rust on
shelving.

(Ex.: phosphoric acid, nitric acid,etc.)


These products vary depending on the
specific purpose of the product.
• 4. Abrasives – are generally used to
remove heavy accumulations of soil
that are difficult to remove with
detergents, solvents and acids.
These products must be carefully
used to avoid damage to the surface
being cleaned.
Other chemicals used for
cleaning and/or sanitizing
kitchen equipment and utensils
are the following:
• 1. ammonia
• 2. dish washing liquid
• 3. chlorine
• 4. carbolic acid
• 5. timsen
• 6. disinfectants
• 7. soap

You might also like