Scribd
Upload
22 views

Homework 4 Q1) Suppose We Want To Transmit The Message 11001001 and Protect It From Errors

Uploaded by

manthan
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
22 views

Homework 4 Q1) Suppose We Want To Transmit The Message 11001001 and Protect It From Errors

Uploaded by

manthan
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Homework 4

Q1) Suppose we want to transmit the message 11001001 and protect it from errors
using the CRC polynomial x3 + 1.
(a) Use polynomial long division to determine the message that should be
transmitted.
Following the book's steps (P.94):
1) Get T(x):
Since M(x) = 11001001 and k = 3, we derive : T(x) = 11001001
000
2) Divide T(x) / C(x):
1101001

1001 | 11001001 000


1001

1011
1001

1000
1001

1100
1001

1010
1001

11

<- --- remainder = 011 (CRC code)

:: The message to be sent is : 1101001 011

(b) Suppose the leftmost bit of the message is inverted due to noise on the
transmission link. What is the result of the receiver’s CRC calculation? How
does the receiver
1000001know that an error has occurred?

1001 | 1001001 011


1001

001011
1001

1
0

<-
-
re
m
ai
Q2) Suppose we want to transmit the message 1011 0010 0100 1011 and protect it
from errors using the CRC-8 polynomial x8 + x2 + x1 + 1.
(a)Use polynomial long division to determine the message that should be
transmitted.
100 100010101001

100000111 | 101100100100101100000000
------------------- 100000111

110001110
100000111

100010010
100000111

101011011
100000111

101110000
100000111

111011100
100000111

110110110
100000111

101100010
100000111

110010100
100000111

10010011

(b)Suppose the leftmost bit of the message is inverted due to noise on the
transmission link. What is the result of the receiver’s CRC calculation? How does
the receiver know that an error has occurred?
Inverting the first bit gives 0011 0010 0100 1011 1001 0011. Dividing by
1 0000 0111 gives a remainder of 1011 0110.
Q3) The CRC algorithm as presented in this chapter requires lots of bit
manipulations. It is, however, possible to do polynomial long division taking multiple
bits at a time, via a table-driven method, that enables efficient software
implementations of CRC. We outline the strategy here for long division 3 bits at a
time (see Table 2.6); in practice we would divide 8 bits at a time, and the table would
have 256 entries. Let the divisor polynomial C = C(x) be x3 + x2 + 1, or 1101. To build
the table for C, we take each 3-bit sequence, p, append three trailing 0s, and then
find the quotient q = p⌢000÷C, ignoring the remainder. The third column is the
product C × q, the first 3 bits of which should equal p.

(a) Verify, for p = 110, that the quotients p⌢000 ÷ C and p⌢111 ÷ C are the
same; that is, it doesn’t matter what the trailing bits are.

100
100
1001 110000 1001 | 110111

|
---------------- 1101100 ---------- 110111

(b) Fill in the missing entries in the table.

p q=p000/C Cxq
010 011 010 111
011 010 011 010
110 100 110 100
111 101 111 001
(c) Use the table to divide 101 001 011 001 100 by C. Hint: The first 3 bits of the
dividend are p = 101, so from the table the corresponding first 3 bits of the quotient
are q = 110.Write the 110 above the second 3 bits of the dividend, and subtract C×q
= 101 110, again from the table, from the first 6 bits of the dividend. Keep going in
groups of 3 bits. There should be no remainder.

110 101 011 100 000

1101 | 101 001 011 001 100 000


------------- 101 110

111 011
111 001

010 001
010 111

110 100
110 100

000 000
000 000

You might also like