Scribd
Upload
320 views

Lecture-3 Modeling in Time Domain

The document discusses state space representation, which provides a convenient way to model systems with multiple inputs and outputs using matrices of first-order differential equations. It notes some advantages of state space representation over frequency domain techniques, such as its ability to model nonlinear, time-varying, and non-zero initial condition systems. The document then outlines the steps to develop a state space representation, including selecting state variables and writing simultaneous first-order differential equations in terms of the state variables. It provides examples of converting transfer functions to state space form and vice versa, as well as linearizing nonlinear systems.

Uploaded by

Rayana ray
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
320 views

Lecture-3 Modeling in Time Domain

The document discusses state space representation, which provides a convenient way to model systems with multiple inputs and outputs using matrices of first-order differential equations. It notes some advantages of state space representation over frequency domain techniques, such as its ability to model nonlinear, time-varying, and non-zero initial condition systems. The document then outlines the steps to develop a state space representation, including selecting state variables and writing simultaneous first-order differential equations in terms of the state variables. It provides examples of converting transfer functions to state space form and vice versa, as well as linearizing nonlinear systems.

Uploaded by

Rayana ray
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 24

Modeling in Time domain (State

Space representation)

Chapter 3
Ref. Book: “Control System Engineering”-Norman
S. Nise

Prepared By: Md. Ahsanul Hoque


Lecturer, EEE, IIUC
Advantage & Disadvantage of Frequency
domain
In Chapter 2, is known as the classical, or frequency-domain,
technique. This approach is based on converting a system’s
differential equation to a transfer function, thus generating a
mathematical model of the system that algebraically relates a
representation of the output to a representation of the input.
Replacing a differential equation with an algebraic equation not only
simplifies the representation of individual subsystems but also
simplifies modeling interconnected subsystems.
The primary disadvantage of the classical approach is its limited
applicability: It can be applied only to linear, time-invariant systems
or systems that can be approximated as such.
A major advantage of frequency-domain techniques is that they
rapidly provide stability and transient response information. Thus, we
can immediately see the effects of varying system parameters until an
acceptable design is met.
State Space Representation
In control engineering, a state space representation is a mathematical
model of a physical system as a set of input, output and state variables
related by first-order differential equations. To abstract from the
number of inputs, outputs and states, the variables are expressed as
vectors. Additionally, if the dynamical system is linear and time
invariant, the differential and algebraic equations may be written in
matrix form. The state space representation (also known as the "time-
domain approach") provides a convenient and compact way to model
and analyze systems with multiple inputs and outputs. Example:
Why State space representation needed?
Modeling systems by using linear, time-invariant differential
equations and subsequent transfer functions became inadequate. The
state-space approach (also referred to as the modern, or time-domain,
approach) is a unified method for modeling, analyzing, and designing
a wide range of systems. For example, the state-space approach can be
used to represent nonlinear systems that have backlash, saturation,
and dead zone. Also, it can handle, conveniently, systems with
nonzero initial conditions. Time-varying systems, (for example,
missiles with varying fuel levels or lift in an aircraft flying through a
wide range of altitudes) can be represented in state space.
Steps to develop state space representation
1.We select a particular subset of all possible system variables and call
the variables in this subset state variables.

2.For an nth-order system, we written simultaneous, first-order


differential equations in terms of the state variables. We call this system
of simultaneous differential equations state equations.

4.We algebraically combine the state variables with the system’s input
and find all of the other system variables for We call this
algebraic equation the output equation.

5.We consider the state equations and the output equations a viable
representation of the system. We call this representation of the system a
state-space representation.
Example: 1 order system
st
Try yourself the above 2nd order system, see
page: 120
Important definitions
State Space representation in Physical system
state-space formulation-to select the state vector, which must be chosen
according to the following considerations
Do yourself: Example 3.2, 3.3
Skill-Assessment Exercise 3.1

Solution
………………………… (1)
Converting a Transfer Function to State Space
Example 3.4
Do: Example 3.5 & Skill-Assessment Exercise 3.3
Converting from State Space to a Transfer Function
Now we move in the opposite direction and convert the state-
space representation into a transfer function
Try Skill assessment exercise 3.4
Linearization
A prime advantage of the state-space representation over the transfer
function representation is the ability to represent systems with
nonlinearities, such as the one shown in Figure 3.13.

Try Some exercise according to Previous


all examples

You might also like