Scribd
Upload
3K views10 pages

Ericsson Radio Node Retu Troubleshooting Guide

This document provides troubleshooting steps for RETU issues on an Ericsson radio node. It involves checking the antenna port position, IRCU specifications, AISG cable connections from the RRU to antenna, RET signal and power levels. It also provides steps to scan antenna devices, set unique IDs, restart RRUs and verify RET enablement after troubleshooting. The contact details are also provided.

Uploaded by

rifki nurazmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
3K views10 pages

Ericsson Radio Node Retu Troubleshooting Guide

This document provides troubleshooting steps for RETU issues on an Ericsson radio node. It involves checking the antenna port position, IRCU specifications, AISG cable connections from the RRU to antenna, RET signal and power levels. It also provides steps to scan antenna devices, set unique IDs, restart RRUs and verify RET enablement after troubleshooting. The contact details are also provided.

Uploaded by

rifki nurazmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

RETU

ERICSSON RADIO NODE


RETU TROUBLESHOOTING GUIDE
ANTENNA PORT POSITION

CV3PX310R1
8-port sector antenna, 2x 790–960
and 6x 1710–2690 MHz, 65° HPBW,
4x RET with manual override.

Internal Remote Control Unit


IRCU-502
IRCU-502 supports 4 or 5 band
antenna
3GPP / AISG 2.0 Compliance
Compact, lightweight
SKU: IRCU-502 DS
CABLE AISG
Detailed in RETSUBUNIT
INVXRC
Check Antenna Unit group & Unique ID & rfPort which RRU for reference

Main MO Port R Supposed Cable AISG Connection to Antenna From RRU

GULTE_SUKA_MULYA_TGX_ST> lst rfport

201119-10:51:40 10.77.52.45 20.0f MSRBS_NODE_MODEL_19.Q4_423.28070.65_e4d6 stopfile=/tmp/7084

$ssh_pid = 21942

Connected to 10.77.52.45 (SubNetwork=LTERAN_TAC_42122,MeContext=GULTE_SUKA_MULYA_TGX_ST,ManagedElement=GULTE_SUKA_MULYA_TGX_ST)


===================================================================================
Proxy Adm State Op. State MO
===================================================================================
1763 1 (UNLOCKED) 1 (ENABLED) Equipment=1,FieldReplaceableUnit=RRU-1,RfPort=A
1764 1 (UNLOCKED) 1 (ENABLED) Equipment=1,FieldReplaceableUnit=RRU-1,RfPort=B
1765 1 (UNLOCKED) 1 (ENABLED) Equipment=1,FieldReplaceableUnit=RRU-1,RfPort=R

For AISG cable Port R for RETU Connection Makesure all mo enabled
A: for using Jumper like antenna argus
R: for using aisg cable
Diagram AISG Connection

Make sure cable AISG connection or installed properly


to the antenna check the power voltage in output RRU
and make sure signal & Power Ok
Installed on AISG In On antenna
lh ru fui get devstat
GULTE_SUKA_MULYA_TGX_ST> lh ru fui get devstat |grep Ret

201119-12:27:41 10.77.52.45 20.0f MSRBS_NODE_MODEL_19.Q4_423.28070.65_e4d6 stopfile=/tmp/7084

BXP_2048: Ret Port Power: Off


BXP_2049: Ret Port Power: Off
BXP_2050: Ret Port Power: Off
BXP_2051: Ret Port Power: On
BXP_2052: Ret Port Power: On
BXP_2053: Ret Port Power: On
BXP_2054: Ret Port Power: Off
BXP_2055: Ret Port Power: Off
BXP_2056: Ret Port Power: Off

lh ru fui read ret signal / lh ru fui read ret power


RET suspect fault

#please checked voltage using avo meter on AISG Cable if not present please
replace AISG Cable

#If connection Ret using Jumper make sure antenna support for AISG Jumper
system, & check the MO on Radio Node
Scan antenna Device

Running this command


confb+
set NodeSupport=1,EquipmentDiscovery=1 sftpPassword ******* ||password
set NodeSupport=1,EquipmentDiscovery=1 sftpUsername eid-romanz ||User id
set NodeSupport=1,EquipmentDiscovery=1 sftpServerIpAddress 10.200.32.41
set NodeSupport=1,EquipmentDiscovery=1 sftpServerPath /home/shared/eid-romanz ||Path
set NodeSupport=1,EquipmentDiscovery=1 antennaDeviceScanInBackground true ||false to stop scan. true to start scan
confb-

Cek the scan status

ULTE_CIMAYANG> get EquipmentDiscovery=1

201130-23:04:39 10.77.90.70 20.0f MSRBS_NODE_MODEL_19.Q4_423.28070.65_e4d6 stopfile=/tmp/17991


=================================================================================================================
3070 NodeSupport=1,EquipmentDiscovery=1
=================================================================================================================
antennaDeviceScanInBackground true
antennaDeviceScanStatus 1 (STARTED)
dataRate 0 (BITRATE_9600)
equipmentDiscoveryId 1
portConfiguration 2 (SCAN_ALL_PORTS_WITH_CHOSEN_VOLTAGE)
portVoltage 1 (DC_17V)
sftpPassword ********
sftpServerIpAddress 10.200.28.41
sftpServerPath /home/shared/eid-romanz
sftpUsername eid-romanz
=================================================================================================================
Total: 1 MOs
Check the scan status , makesure finished,

ULTE_CIMAYANG> get EquipmentDiscovery=1

201130-23:08:36 10.77.90.70 20.0f MSRBS_NODE_MODEL_19.Q4_423.28070.65_e4d6 stopfile=/tmp/17991


=================================================================================================================
3070 NodeSupport=1,EquipmentDiscovery=1
=================================================================================================================
antennaDeviceScanInBackground true
antennaDeviceScanStatus 2 (FINISHED)
dataRate 0 (BITRATE_9600)
equipmentDiscoveryId 1
portConfiguration 2 (SCAN_ALL_PORTS_WITH_CHOSEN_VOLTAGE)
portVoltage 1 (DC_17V)
sftpPassword ********
sftpServerIpAddress 10.200.28.41
sftpServerPath /home/shared/eid-romanz
sftpUsername eid-romanz
=================================================================================================================
Total: 1 MOs

Take the result scan on FTP

ManagedElement=ULTE_CIMAYANG,NodeSupport=1,EquipmentDiscovery=1_DeviceScanResult_dsb.xml

And then set the unique ID, use this command


Set the unique Id based on data

confb+
set AntennaUnitGroup=1,AntennaNearUnit=RET-1 uniqueId AR00014CN1049112322
set AntennaUnitGroup=1,AntennaNearUnit=RET-2 uniqueId AR00014CN1049112321
set AntennaUnitGroup=1,AntennaNearUnit=RET-3 uniqueId AR00014CN1049112323
set AntennaUnitGroup=2,AntennaNearUnit=RET-1 uniqueId AR00012CN1022902462
set AntennaUnitGroup=2,AntennaNearUnit=RET-2 uniqueId AR00012CN1022902461
set AntennaUnitGroup=2,AntennaNearUnit=RET-3 uniqueId AR00012CN1022902463
set AntennaUnitGroup=3,AntennaNearUnit=RET-1 uniqueId AR00012CN1023062572
set AntennaUnitGroup=3,AntennaNearUnit=RET-2 uniqueId AR00012CN1023062571
set AntennaUnitGroup=3,AntennaNearUnit=RET-3 uniqueId AR00012CN1023062573
confb-
Restart RRU 1-2-3 &
ULTE_CIMAYANG> acl 2915

201130-23:20:44 10.77.90.70 20.0f MSRBS_NODE_MODEL_19.Q4_423.28070.65_e4d6 stopfile=/tmp/17991

=================================================================================================================
Proxy MO Action Nr of Params
=================================================================================================================
2915 FieldReplaceableUnit=RRU-1 resetUnitInstallation 0
2915 FieldReplaceableUnit=RRU-1 restartUnit 3
2915 FieldReplaceableUnit=RRU-1 writeRepairDelivNote 6
=================================================================================================================

And see the RET enable


ULTE_CIMAYANG> lst AntennaUnitGroup=1,AntennaNearUnit=RET-

201130-23:41:32 10.77.90.70 20.0f MSRBS_NODE_MODEL_19.Q4_423.28070.65_e4d6 stopfile=/tmp/17991


===================================================================================
Proxy Adm State Op. State MO
===================================================================================
2754 1 (UNLOCKED) 1 (ENABLED) Equipment=1,AntennaUnitGroup=1,AntennaNearUnit=RET-1
2755 1 (ENABLED) Equipment=1,AntennaUnitGroup=1,AntennaNearUnit=RET-1,RetSubUnit=1
2756 1 (UNLOCKED) 1 (ENABLED) Equipment=1,AntennaUnitGroup=1,AntennaNearUnit=RET-2
2757 1 (ENABLED) Equipment=1,AntennaUnitGroup=1,AntennaNearUnit=RET-2,RetSubUnit=1
2758 1 (UNLOCKED) 1 (ENABLED) Equipment=1,AntennaUnitGroup=1,AntennaNearUnit=RET-3
2759 1 (ENABLED) Equipment=1,AntennaUnitGroup=1,AntennaNearUnit=RET-3,RetSubUnit=1
===================================================================================
Total: 6 Mos

After all completed set scan device back false


set NodeSupport=1,EquipmentDiscovery=1 antennaDeviceScanInBackground false

Created CV
Done
Thank you
Any queries please contact
Asap
[email protected];

You might also like