Scribd
Upload
941 views14 pages

Electromagnetic Blood Flow Meters

Electromagnetic blood flow meters measure blood flow velocity using electromagnetic induction. They work by generating a magnetic field perpendicular to blood flow in a vessel. The moving blood induces a voltage in electrodes on either side, proportional to flow velocity. The induced voltage is measured to determine instantaneous and average blood flow. AC meters use alternating current electromagnets and balancing circuits to eliminate error voltages, while the magnetic flowmeter block diagram shows how components generate the magnetic field and measure the induced voltage signal.

Uploaded by

abhilashkrishnantk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
941 views14 pages

Electromagnetic Blood Flow Meters

Electromagnetic blood flow meters measure blood flow velocity using electromagnetic induction. They work by generating a magnetic field perpendicular to blood flow in a vessel. The moving blood induces a voltage in electrodes on either side, proportional to flow velocity. The induced voltage is measured to determine instantaneous and average blood flow. AC meters use alternating current electromagnets and balancing circuits to eliminate error voltages, while the magnetic flowmeter block diagram shows how components generate the magnetic field and measure the induced voltage signal.

Uploaded by

abhilashkrishnantk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

Electromagnetic Blood Flow Meters

• Measures instantaneous pulsatile flow of


blood

• Works based on the principle of


electromagnetic induction

• The voltage induced in a conductor moving in a


magnetic field is proportional to the velocity of the
conductor

• The conductive blood is the moving conductor


Principle of Electromagnetic Blood Flow Meters
Principle of Electromagnetic Blood flow Measurement
Principle of Electromagnetic Blood Flow Meters
• A permanent magnet or electromagnet
positioned around the blood vessel generates
a magnetic field perpendicular to the
direction of the flow of the blood.

• Voltage induced in the moving blood column


is measured with stationary electrodes
located on opposite sides of the blood vessel
and perpendicular to the direction of the
magnetic field.
Principle of Electromagnetic Blood Flow Meters

• The Induced emf

• Where
• B = magnetic flux density, T
• L = length between electrodes, m
• u = instantaneous velocity of blood, m/s
Principle of Electromagnetic Blood Flow Meters

• This method requires that the blood vessel be


exposed so that the flow head or the
measuring probe can be put across it.
Design of Flow Transducers
• The electromagnetic flow-transducer is a tube of
non-magnetic material to ensure that the magnetic
flux does not bypass the flowing liquid and go into
the walls of the tube.

• The tube is made of a conducting material and


generally has an insulating lining to prevent short
circuiting of induced emf.

• The induced emf is picked up by point electrodes


made from stainless steel or platinum.
Design of Flow Transducers
• The flow head contains a slot through which the
intact blood vessel can be inserted to make a snug
fit.

• Several probes of different sizes must therefore


accompany the flowmeter to match the full range
of sizes of the blood vessels which have various
diameters.

• Flow heads having as small as 1mm are available.


Types of Electromagnetic Blood Flow Meters
• DC Flow meters

• Use DC Magnetic field.


• Cause electrode polarization and amplifier drift.

• AC Flow meters
• Electromagnets are driven by alternating
currents.
• The transducer acts like a Transformer and
induces error voltages that often exceed the
signal levels by several orders of magnitude.
Electromagnetic AC flow meters
• Error recovery is achieved by using several different
waveforms for magnet current

• Sine, Square, Trapezoidal.

• Suitable balancing circuits are used to balance out


the error voltage.
Sine wave Flowmeters
• The transformer induced voltage is 90˚ out of
phase and is eliminated by

• Injecting a voltage of equal strength and


opposite phase into the signal.

• Using a gated amplifier.


• Permit the amplification of the signal
only during the flow induced voltages are
maximum and the transformer induced
voltages are minimum.
Square wave Flowmeters
• The transformer induced voltage is only a
spike.

• Separation is easier as the amplifier can be


gated only for a very short period.

• Blanking is required only when the current in


the magnet is reversing its direction and the
amplifier works during the flat portion of the
square wave.
Magnetic Flowmeter Block Diagram
Magnetic Flowmeter Block Diagram
• The oscillator, which drives the magnet
provides a control signal for the gate,
operates at a frequency of between 60 and
400 Hz.

• The frequency response is high enough to


allow the recording of the flow pulses.

• The mean or average flow can be derived by


use of a low-pass filter.

You might also like