Scribd
Upload
34 views

IT Essentials: Computer Lab Procedures and Tool Use

This document provides information about tools and procedures for working on computers and IT equipment. It discusses proper tool use to prevent accidents and damage. It describes hardware tools including ESD tools like antistatic wrist straps, hand tools like screwdrivers and pliers, cleaning tools like compressed air and soft cloths, and diagnostic tools like multimeters. It also discusses software tools for disk management, protection, and diagnosing problems. Proper use of the correct tools is emphasized for safely performing tasks.

Uploaded by

Nordyl Bianzon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
34 views

IT Essentials: Computer Lab Procedures and Tool Use

This document provides information about tools and procedures for working on computers and IT equipment. It discusses proper tool use to prevent accidents and damage. It describes hardware tools including ESD tools like antistatic wrist straps, hand tools like screwdrivers and pliers, cleaning tools like compressed air and soft cloths, and diagnostic tools like multimeters. It also discusses software tools for disk management, protection, and diagnosing problems. Proper use of the correct tools is emphasized for safely performing tasks.

Uploaded by

Nordyl Bianzon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 39

IT Essentials: Computer Lab

Procedures and Tool Use


Proper Use of Tools

• Using tools properly helps prevent accidents


and damage to equipment and people. This
section describes and covers the proper use
of a variety of hardware, software, and
organizational tools specific to working with
computers and peripherals.
Hardware Tools

• For every job there is the right tool. Make


sure that you are familiar with the correct
use of each tool and that the correct tool is
used for the current task. Skilled use of tools
and software makes the job less difficult and
ensures that tasks are performed properly
and safely.
• A toolkit should contain all the tools necessary to
complete hardware repairs. As you gain experience,
you learn which tools to have available for different
types of jobs. Hardware tools are grouped into four
categories
• ESD tools
• Hand tools
• Cleaning tools
• Diagnostic tools
• ESD Tools
• There are two ESD tools: the antistatic wrist
strap and the antistatic mat. The antistatic wrist
strap protects computer equipment when
grounded to a computer chassis. The antistatic
mat protects computer equipment by preventing
static electricity from accumulating on the
hardware or on the technician.
•Hand Tools
•Most tools used in the computer
assembly process are small hand tools.
They are available individually or as part
of a computer repair toolkit. Toolkits
range widely in size, quality, and price.
Some common hand tools and their uses
are:
Flat-head screwdriver: Used to tighten or
loosen slotted screws.
Phillips-head screwdriver: Used to tighten or
loosen cross-headed screws.
Torx screwdriver: Used to tighten or loosen screws that have a star-
like depression on the top, a feature that is mainly found on laptops.
Hex driver: Used to tighten or loosen nuts in the same way that a
screwdriver tightens or loosens screws (sometimes called a nut
driver).
Needle-nose pliers: Used to hold small parts.
Wire cutters: Used to strip and cut wires.
Tweezers: Used to manipulate small parts.
Part retriever: Used to retrieve parts from
locations that are too small for your hand to fit.
Flashlight: Used to light up areas that you
cannot see well.
Wire stripper: A wire stripper is used to remove the insulation
from wire so that it can be twisted to other wires or crimped to
connectors to make a cable.

https://www.youtube.com/watch?v=E6Nyzq3CzlI
Crimper: Used to attach connectors to wires.

https://www.youtube.com/watch?v=Svja8zEcKNQ
Punch-down tool: Used to terminate wire into termination blocks.
Some cable connectors must be connected to cables using a punch
down tool.
https://www.youtube.com/watch?v=0
VYxAvIl8rE
Cleaning Tools
• Having the appropriate cleaning tools is
essential when maintaining and repairing
computers. Using the appropriate cleaning
tools helps ensure that computer
components are not damaged during
cleaning. Cleaning tools include the
following:
Soft cloth: Used to clean different computer
components without scratching or leaving debris
Compressed air: Used to blow away dust and debris from
different computer parts without touching the components

https://www.youtube.com/watch?v=ozFVFxt55i4
Cable ties: Used to bundle cables neatly
inside and outside of a computer
Parts organizer: Used to hold screws, jumpers, fasteners, and
other small parts and prevents them from getting mixed together
Diagnostic Tools
• Diagnostic tools are used to test and diagnose
equipment. Diagnostic tools include the following:
A digital multimeter, as shown in Figure 2-3, is a
device that can take many types of measurements. It
tests the integrity of circuits and the quality of
electricity in computer components. A digital
multimeter displays the information on an LCD or LED.
A loopback adapter, also called a loopback plug, tests the basic
functionality of computer ports. The adapter is specific to the port
that you want to test.
The toner probe, as shown in Figure 2-4, is a two-part tool. The toner part is connected to a cable at one end
using specific adapters, such as an RJ-45, coaxial, or metal clips. The toner generates a tone that travels the length
of the cable. The probe part traces the cable. When the probe is in near proximity to the cable to which the toner is
attached, the tone can be heard through a speaker in the probe.
https://www.youtube.com/watch?v=9gTA5ku
L8YA
Disk Management Tools

• Software tools help diagnose computer and


network problems and determine which
computer device is not functioning
correctly. A technician must be able to use a
range of software tools to diagnose
problems, maintain hardware, and protect
the data stored on a computer.
• You must be able to identify which software
to use in different situations. Disk
management tools help detect and correct
disk errors, prepare a disk for data storage,
and remove unwanted files.
The following are some disk management
tools:
•FDISK: A command-line tool that creates
and deletes partitions on a hard drive.
The FDISK tool is not available in
Windows XP, Vista, or 7. It has been
replaced with the Disk Management
tool.
• Disk Management Tool: Initializes disks, creates partitions,
and formats partitions.
• ScanDisk or CHKDSK: Checks the integrity of files and folders
on a hard drive by scanning the file system. These tools
might also check the disk surface for physical errors.
• Defrag: Optimizes space on a hard drive to allow faster
access to programs and data.
• Disk Cleanup: Clears space on a hard drive by searching for
files that can be safely deleted.
• System File Checker (SFC): A command-line tool that scans
the operating system critical files and replaces files that are
corrupted.
• Format: Prepares a hard drive to store a information.
Protection Software Tools

• Each year, viruses, spyware, and other types


of malicious attacks infect millions of
computers. These attacks can damage
operating systems, applications, and data.
Computers that have been infected may
even have problems with hardware
performance or component failure.
• To protect data and the integrity of the
operating system and hardware, use
software designed to guard against attacks
and to remove malicious programs.
Various types of software protect hardware
and data:
• Windows 7 Action Center: Checks the status of essential
security settings. The Action Center continuously checks to
make sure that the software firewall and antivirus programs
are running. It also ensures that automatic updates
download and install automatically.
• Antivirus program: Protects against virus attacks.
• Antispyware program: Protects against software that sends
information about web surfing habits to an attacker. Spyware
can be installed without the knowledge or consent of the
user.
• Window 7 Firewall: Runs continuously to protect against
unauthorized communications to and from your computer.
Hand Tools
• A technician needs to be able to properly use
each tool in the toolkit. This topic covers many of
the various hand tools used when repairing
computers.
• Screws
• Match each screw with the proper screwdriver. Place the tip
of the screwdriver on the head of the screw. Turn the
screwdriver clockwise to tighten the screw and
counterclockwise to loosen the screw.

• Screws can become stripped if you over-tighten them with a


screwdriver. A stripped screw, as shown in Figure, may get
stuck in the screw hole, or it may not tighten firmly. Discard
stripped screws.
THANK YOU
Teacher : Sir Nordyl Bianzon

You might also like