Scribd
Upload
49 views

Wireless

This document describes a wireless power transmission system with maximum power tracking. It uses magnetic coupling for power transfer between transmitting and receiving coils. By adjusting the duty cycle of a DC-DC converter on the receiving side, the system can track the critical coupling point where maximum power transfer occurs. This improves efficiency over traditional wireless charging. Components needed include coils, transistors, capacitors, and a microcontroller. MATLAB and ANSYS software are used for simulation and design. Applications include electric vehicle charging and powering mobile devices wirelessly. Future work may extend power transfer distances and allow charging under misalignment.

Uploaded by

Harshal Vide
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
49 views

Wireless

This document describes a wireless power transmission system with maximum power tracking. It uses magnetic coupling for power transfer between transmitting and receiving coils. By adjusting the duty cycle of a DC-DC converter on the receiving side, the system can track the critical coupling point where maximum power transfer occurs. This improves efficiency over traditional wireless charging. Components needed include coils, transistors, capacitors, and a microcontroller. MATLAB and ANSYS software are used for simulation and design. Applications include electric vehicle charging and powering mobile devices wirelessly. Future work may extend power transfer distances and allow charging under misalignment.

Uploaded by

Harshal Vide
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 15

WIRELESS POWER TRANSMISSION

EITH MAXIMUM POWER TRACKING


SYSTEM
INDEX
1. INTRODUCTION
2. LITERATURE REVIEW
3. COMPONENT REQUIRED
4. SOFTWARE USED
5. CIRCUIT DIAGRAM
6. WORKING PRINCIPLE
7. PLAN OF IMPLEMENTATIONS
8. APPLICATION
9. FUTURE SCOPE
10. CONCLUSION
11. REFERENCES
INTRODUCTION

Wireless power transfer(WPT)is the transmission of electric power without wires



METHODS OF WPT:
1.electromagnetic induction
2.capacitive coupling
3.electromagnetic radiation like microwave

INVENTIO: by sir NIKOLA TESALA

In this project we are are using magnetic coupling for power transmission. And
making a system which can find critical coupling point at which maximum power will
be transmit

This will improves the efficiency ,reliability of a system like wireless charging of
electric vehicle , mobile phone charging etc.
LITERATURE REVIEW
Establishment of power transfer model
High frequency transmitting and receiving coil
Maximum power transfer condition
To achieving critical coupling point by using dc to dc
converter on load side
Realization of ccp and maximum power tracking
Realtime adjustment of duty cycle of dc to dc
converter
COMPONENT REQUIRED
COPPER COIL
TRANSISTORS
RESISTOR
CAPACITOR
DIODE
INDUCTOR
BATTERY
WIRES
PCB
MICROCONTROLLER
INTERFACING MODULE
INDICATORS
MULTIMETER
SOFTWARE USE
MATLAB
matlab Simulink,matlab gui
ANSYS
ansys electronic desktop ,Maxwell 3D design
CIRCUIT DIAGRAM

1. MAIN CIRCUIT OF WIRELESS POWER TRANSFER


2. BOOST CONVERTER FOR MAXIMUM POWER TRACKING
SYSBUCKTEM IN MATLAB SIMULINK
WORKING PRINCIPLE
 A load power model for the magnetic resonant coupling WPT
system with string-to-string structure is carried out at first. And then,
using the power normalization method, the theoretical performance
is analyzed and a special working point called critical coupling point
(CCP) is found. At this point, the system can transfer the possible
maximum power. Thus, maximum power tracking (MPT) problem
can be transformed into the critical coupling point tracking (CCPT)
problem. Further, relationship between CCP and load resistance is
analyzed. To achieve the maximum transmission power under any
load, a DC-DC impedance conversion circuit is added at the
receiving side so that the maximum power can be tracked by
adjusting the equivalent load resistance dynamically.
PLAN OF IMPLEMENTATION
APPLICATION
ELECTRIC VEHICLE CHARGING
ELECTRONIC ACCESSORIES LIKE MOBILE,LAPTOP
CHARGING
FUTURE SCOPE
Iong didtance power transmission
Single wire transmission without grounding
Efficient Power transmission in misalignment condition
Data transmossin
CONCLUSION
 It is proved that the maximum power is always coincident
with the CCP and the maximum power can be realized by the
CCP tracking.
 By adding a DC-DC converter on the receiving side, we can
adjust the duty cycle to obtain the maximum power load which
can make the system work at the CCP.
So the maximum power tracking is realized by tracking CCP.
Simulation results show the tracking process and the system
can reach the maximum power point in a short time
REFERENCES
IEEE PAPER
Haiping, P., & Haoran, C. (2018). Maximum Power Tracking of
Wireless Power Transmission Systems Based on Critical
Coupling Point Tracking. 2018 37th Chinese Control
Conference (CCC). doi:10.23919/chicc.2018.8483287 
WIKIPEDIA
THANKING YOU !!

You might also like