Elementary Fluid Mechanics

Recommended Books:
Text Book:
 Fluid Mechanics With Engineering Applications (10th
Edition)
by E. John Finnemore & Joseph B. Franzini
Reference Books:
 A textbook of Hydraulics, Fluid Mechanics and Hydraulic
Machines (19th Edition) by R.S. Khurmi
 Applied Fluid Mechanics (6th Edition) by Robert L. Mott
 Fluid Mechanics by A.K Jain
Properties of Fluids
Lecture - 1
 Fluid
 A fluid is defined as:
“A substance that continually deforms (flows) under
an applied shear stress regardless of the magnitude
of the applied stress”.
 It is a subset of the phases of matter and includes
liquids, gases, plasmas and, to some extent, plastic
solids.
 Fluid
 It can also be defined as a material in which movement occurs
continuously under the application of a tangential shear stress.
 Example:

 A simple example is shown in Figure, in which a timber board floats on a reservoir

of water. If a force F, is applied to one end of the board, then the board transmits a
tangential shear stress to the reservoir surface. The board and the water beneath
will continue to move as long as F and shear stress are nonzero, which means that
water satisfies the definition of a fluid. Air is another fluid-that is commonly
encountered in civil engineering applications.
 Mechanics
 Mechanics can be defined as a branch of science
which deals with the motion of objects and forces
acting on them.
 Mechanics can be divided into two categories:
 Fluid Mechanics

 Solid Mechanics
 Fluid Vs Solid Mechanics
 Fluid mechanics:
“The study of the physics of materials which take the shape of
their container.” Or
“Branch of Engg. science that studies fluids and forces on
them.”
 Solid Mechanics:
“The study of the physics of materials with a defined rest
shape.”
 Fluid Mechanics can be further subdivided into fluid statics, the
study of fluids at rest, and kinematics, the study of fluids in motion
and fluid dynamics, the study of effect of forces on fluid motion.
 In the modern discipline called Computational Fluid Dynamics
(CFD), computational approach is used to develop solutions to fluid
mechanics problems.
 Distinction between a Solid and a Fluid

Solid Fluid
 Definite Shape and definite  Indefinite Shape and Indefinite
volume. volume & it assumes the shape
 Does not flow easily. of the container which it
occupies.
 Molecules are closer.
 Flow Easily.
 Attractive forces between the
molecules are large enough to  Molecules are far apart.
retain its shape.  Attractive forces between the
 An ideal Elastic Solid deform molecules are smaller.
under load and comes back to  Intermolecular cohesive forces
original position upon removal of in a fluid are not great enough to
load. hold the various elements of
 Plastic Solid does not comes back fluid together. Hence Fluid will
to original position upon removal flow under the action of applied
of load, means permanent stress. The flow will be
deformation takes place. continuous as long as stress is
applied.
 Distinction between a Gas and Liquid

 The molecules of a gas are  A liquid is relatively

much farther apart than incompressible.
those of a liquid.  If all pressure, except that
 Hence a gas is very of its own vapor pressure,
compressible, and when is removed, the cohesion
all external pressure is between molecules holds
removed, it tends to expand them together, so that the
indefinitely. liquid does not expand
 A gas is therefore in indefinitely.
equilibrium only when it is  Therefore a liquid may
completely enclosed. have a free surface.
SI Units
FPS Units
 Important Terms
 Density (r):
Mass per unit volume of a substance.
 kg/m3 in SI units m
 Slug/ft3 in FPS system of units r
V
 Specific weight (g):
Weight per unit volume of substance.
w
 N/m3 in SI units g 
 lbs/ft3 in FPS units V
 Density and Specific Weight of a fluid are related as:
g  rg
 Where g is the gravitational constant having value 9.8m/s2 or
32.2 ft/s2.
 Important Terms
 Specific Volume (v):
Volume occupied by unit mass of fluid.

 It is commonly applied to gases, and is usually expressed in

cubic feet per slug (m3/kg in SI units).
 Specific volume is the reciprocal of density.

SpecificVolume  v  1 / r
 Important Terms
 Specific gravity:
It can be defined in either of two ways:
a. Specific gravity is the ratio of the density of a substance to
the density of water at 4°C.
b. Specific gravity is the ratio of the specific weight of a
substance to the specific weight of water at 4°C.

g l rl
s liquid  
g w rw
 Example
The specific wt. of water at ordinary temperature and
pressure is 62.4lb/ft3. The specific gravity of mercury is
13.56. Compute density of water, Specific wt. of mercury,
and density of mercury.
Solution:

1. r water  g water / g  62.4/32.2  1.938 slugs/ft3

2. g mercury  s mercuryg water  13 .56 x62 .4  846 lb / ft 3
3. r mercury  smercury r water  13 .56 x1.938  26 .3slugs / ft 3

(Where Slug = lb.sec2/ ft)

 Example
A certain gas weighs 16.0 N/m3 at a certain temperature and
pressure. What are the values of its density, specific volume,
and specific gravity relative to air weighing 12.0 N/m3
Solution:

1. Density ρ  γ /g
ρ  16/9.81  16.631 kg/m 3

2. Specific volume υ  1/ρ

u  1/1.631  0.613 m 3 /kg

3. Specific gravity s  γ f /γ air

s  16/12  1.333
 Example
The specific weight of glycerin is 78.6 lb/ft3. compute its density
and specific gravity. What is its specific weight in kN/m3
Solution:

1. Density r  g / g
r  78.6/32.2  2.44 slugs/ft 3

2. Specific gravity s  g l / g w
s  78.6/62.4  1.260
so r  1.260x1000 kg/m 3
r  1260 Kg/m 3
3. Specific weight in kN/m 3
g r xg
g  9.81x1260  12.36 kN/m 3
 Example
Calculate the specific weight, density, specific volume and
specific gravity of 1litre of petrol weights 7 N.
Solution:
Given Volume = 1 litre = 10-3 m3
Weight = 7 N
1. Specific weight,
w = Weight of Liquid/volume of Liquid
w = 7/ 10-3 = 7000 N/m3
2. Density, r = g /g
r = 7000/9.81 = 713.56 kg/m3
Solution (Cont.):
3. Specific Volume = 1/ r
 1/713.56
=1.4x10-3 m3/kg
4. Specific Gravity = s =
Specific Weight of Liquid/Specific Weight of Water
= Density of Liquid/Density of Water
s = 713.56/1000 = 0.7136
 Example
If the specific gravity of petrol is 0.70.Calculate its Density,
Specific Volume and Specific Weight.
Solution:
Given
Specific gravity = s = 0.70
1. Density of Liquid, r  s x density of water
= 0.70x1000
= 700 kg/m3
2. Specific Volume = 1/ r
 1/700
 1.43 x 10-3
3. Specific Weight, = 700x9.81 = 6867 N/m3
 Compressibility
 It is defined as: “Change in Volume due to change in Pressure.”
 The compressibility of a liquid is inversely proportional to Bulk Modulus (volume
modulus of elasticity).
 Bulk modulus of a substance measures resistance of a substance to uniform
compression.  dp
Ev 
 It is defined as the ratio between pressure increase and the (dv / v)
resulting decrease in a material's volume.  v 
It is equal to the change in pressure divided by the change Ev   dp

 dv 
in volume divided by initial volume. The negative sign indicates that an
increase in pressure is accompanied by a decrease in volume.
 Where; v is the specific volume and p is the pressure.
 A large Bulk Modulus indicates a relative incompressible fluid.
 Units: Psi, MPa , As v/dv is a dimensionless ratio, the units of E and p are
identical.
 Example
At a depth of 8km in the ocean the pressure is 81.8Mpa. Assume
that the specific weight of sea water at the surface is 10.05 kN/m3
and that the average volume modulus is 2.34 x 103 N/m3 for that
pressure range.
(a) What will be the change in specific volume between that at the
surface ant at that depth?
(b) What will be the specific volume at that depth?
(c) What will be the specific weight at that depth?
Solution:

(a) v 1  1 / p1  g / g 1
Using Equation :
 9.81 / 10050  0.000976 m 3 / kg
 p
v  0.000976 (81 .8 x10  0) /(2.34 x10 )
6 9 Ev 
( v / v )
 -34.1x10 -6
m 3 / kg dv p

v Ev
(b) v 2  v1  v  0.000942 m 3 / kg v2  v1 p p
 2 1
v1 Ev

(c) g 2  g / v2  9.81 / 0.000942  10410 N / m 3

 Viscosity
 Viscosity is a measure of the resistance of a fluid to deform
under shear stress.
 It is commonly perceived as thickness, or resistance to flow.
 Viscosity describes a fluid's internal resistance to flow and
may be thought of as a measure of fluid friction. Motor oil, for
example, has high viscosity and resistance to shear, is
cohesive and feels “sticky,” whereas gasoline has low
viscosity.Similarly, water is "thin", having a lower viscosity,
while vegetable oil is "thick" having a higher viscosity.
 The friction forces in flowing fluid result from the cohesion
and momentum interchange between molecules.
 All real fluids (except super-fluids) have some resistance to
shear stress, but a fluid which has no resistance to shear stress
is known as an ideal fluid.
 It is also known as Absolute Viscosity or Dynamic
Effect of temperature on Viscosity of
Fluids
 Figure indicates how the viscosities of typical fluids depend on temperature.
 As the temperature increases, the viscosities of all liquids decrease, while the
viscosities of all gases increase.
 This is because the force of cohesion, which diminishes with temperature,
predominates with liquids, while with gases the predominating factor is the
interchange of molecules between the layers of different velocities. Thus a rapidly-
moving gas molecule shifting into a slower moving layer tends to speed up the
latter. And a slow-moving molecule entering a faster-moving layer tends to slow
down the faster-moving layer. This molecular interchange sets up a shear or
produces a friction force between adjacent layers. At higher temperatures
molecular activity increases, so causing the viscosity of gases to increase with
temperature.
Effect of temperature on Viscosity of
Fluids

Trends in viscosity variation with

temperature
Viscosity
 Newtons’ Law of Viscosity
 As a fluid moves, a shear stress is developed
in it, the magnitude of which depends on the
viscosity of the fluid.
 Shear stress, denoted by the Greek letter (tau),
τ, can be defined as the force required to slide
one unit area layer of a substance over
another.
 Thus, τ is a force divided by an area and can

be measured in the units of N/m2 (Pa) or lb/ft2.

 Newtons’ Law of Viscosity
 Let us consider a liquid element between the fixed plate and
the movable plate at a distance ‘Y’ apart, ‘A’ is the contact
area (Wetted area) of the movable plate, ‘F’ is the force
required to move the plate with a velocity ‘U’.
 Newtons’ Law of Viscosity
 According to Newton’s law shear stress is proportional to
shear strain.
 Experiments have shown that: F A
AU
FF U F 
AU
Y
AU Y
FF 1/Y Thus,
Y
 Since, Shear Stress= Shear Force/Area So, τ=F/A
 F/A AU/AY F/A U/Y τF AU
U/Y
Y
 Newtons’ Law of Viscosity
 The fact that the shear stress in the fluid is directly
proportional to the velocity gradient (shear strain) can be
stated mathematically as
F U du
 τ U/Y Thus,    m  m
A Y dy

 where the constant of proportionality m (the Greek letter miu)

is called the dynamic viscosity of the fluid. The term absolute
viscosity is sometimes used.
 Kinematic Viscosity
 The kinematic viscosity ν is defined as:
“Ratio of absolute viscosity to density.”
m

r
 Newtonian Fluid
 A Newtonian fluid; where stress is directly
proportional to rate of strain, and (named for Isaac
Newton) is a fluid that flows like water, its stress versus
rate of strain curve is linear and passes through the
origin. The constant of proportionality is known as the
viscosity.
 A simple equation to describe Newtonian fluid behavior
is
du
 m
dy

 Where m = absolute viscosity/Dynamic viscosity or

simply viscosity
 = shear stress
 Rheology is the science of the flow and deformation of matter
(liquid or “soft” solid) under the effect of an applied force

 Deformation → change of the shape and the size of a body

due to applied forces (external forces and internal forces)

 Flow → irreversible deformation (matter is not reverted to the

original state when the force is removed) – Elasticity →
reversible deformation (matter is reverted to the original form
after stress is removed)
Elastic Solid:
The solid resists forces that act to change its shape. If the force is not too
great, it deforms only slightly, and reverts to its original shape as soon as the
force is removed. This behavior is called elastic, and the materials that exhibit
it are called elastic solids.
Newtonian Fluid:
A fluid for which the constant of proportionality does not change with the rate
of deformation is called a Newtonian fluid, and this is plotted as a straight line
in Fig. The slope of this line is the absolute viscosity µ. E.g. slurries,
suspensions, gels.
Non-Newtonian Fluid:
Fluids in which µ varies with the rate of deformation. These are relatively
uncommon in engineering usage so we restrict to the common fluids that
under normal conditions obey Newton’s equation of viscosity. E.g.
Quicksand, Corn flour and water, Ketchup.
Ideal Plastic:
A plastic that sustains a certain amount of stress before suffering a plastic flow
corresponds to a straight line intersecting the vertical axis at the yield stress.
E.g. sewage, sludge etc.
Ideal Fluid:
The ideal fluid being incompressible having no viscosity falls on the
horizontal axis, whereas a true elastic solid is plotted on the vertical axis.
 Example
Find the kinematic viscosity of liquid in stokes whose
specific gravity is 0.85 and dynamic viscosity is 0.015
poise.
Solution:
Given S = 0.85
m = 0.015 poise
= 0.015 x 0.1 Ns/m2 = 1.5 x 10-3 Ns/m2
We know that S = density of liquid/density of water
density of liquid = S x density of water
r  0.85 x 1000  850 kg/m3
Kinematic Viscosity ,
u  m/ r  1.5 x 10-3/850
 1.76 x 10-6 m2/s = 1.76 x 10-6 x 104cm2/s
= 1.76 x 10-2 stokes.
 Example
A 1 in wide space between two horizontal plane surface is
filled with SAE 30 Western lubricating oil at 80 F. What
force is required to drag a very thin plate of 4 sq.ft area
through the oil at a velocity of 20 ft/mm if the plate is 0.33
in from one surface.
Solution:

m  0.0063 lb.sec/ft 2 ( From  A.1)

F U du
  m m
A Y dy
 1  0.0063 * (20 / 60) /( 0.33 / 12)  0.0764lb / ft 2
 2  0.0063 * (20 / 60) /( 0.67 / 12)  0.0394lb / ft 2
F1   1 A  0.0764 * 4  0.0305lb
F2   2 A  0.0394 * 4  0.158lb
Force  F1  F2  0.463lb
 Example
Assuming a velocity distribution as shown in fig., which is a
parabola having its vertex 12 in from the boundary,
calculate the shear stress at y= 0, 3, 6, 9 and 12 inches.
Fluid’s absolute viscosity is 600 P.
Solution
m 600 P= 600 x 0.1=0.6 N-s/m2 =0.6 x (1x2.204/9.81 x 3.282)
=0.6 x 0.020885=0.01253 lb-sec/ft2

Parabola Equation Y=aX2

120-u= a(12-y) 2
u=0 at y=0 so a= 120/122=5/6

u=120-5/6(12-y) 2 du/dy=5/3(12-y)
=m du/dy
y (in) 0 3 6 9 12
du/dy 20 15 10 5 0

 0.251 0.1880 0.1253 0.0627 0

 Ideal Fluid
 An ideal fluid may be defined as:
“A fluid in which there is no friction i.e Zero viscosity.”
 Although such a fluid does not exist in reality, many fluids
approximate frictionless flow at sufficient distances, and so
their behaviors can often be conveniently analyzed by
assuming an ideal fluid.
 Real Fluid
 In a real fluid, either liquid or gas, tangential or
shearing forces always come into being whenever
motion relative to a body takes place, thus giving
rise to fluid friction, because these forces oppose
the motion of one particle past another.
 These friction forces give rise to a fluid property
called viscosity.
 Surface Tension
 Cohesion: “Attraction between molecules of same surface”
It enables a liquid to resist tensile stresses.
 Adhesion: “Attraction between molecules of different surface”
It enables to adhere to another body.
 “Surface Tension is the property of a liquid, which enables it
to resist tensile stress”.
 At the interface between liquid and a gas i.e at the liquid
surface, and at the interface between two immiscible (not
mixable) liquids, the attraction force between molecules form
an imaginary surface film which exerts a tension force in the
surface. This liquid property is known as Surface Tension.
 Surface Tension
 As a result of surface tension, the liquid surface has a
tendency to reduce its surface as small as possible. That is
why the water droplets assume a nearly spherical shape.
 Capillary Rise: The phenomenon of rising water in the tube of
smaller diameter is called capillary rise.
 Metric to U.S. System Conversions,
Calculations, Equations, and Formulas

 Millimeters (mm) x 0.03937 = inches (")(in)

 Centimeters (cm) x 0.3937 = inches (")(in)

 Meters (m) x 39.37 = inches (")(in)

 Meters (m) x 3.281 = feet (')(ft)

 Meters (m) x 1.094 = yards (yds)

 Kilometers (km) x 0.62137 = miles (mi)

 Kilometers (km) x 3280.87 = feet (')(ft)

 Liters (l) x 0.2642 = gallons (U.S.)(gals)

 Calculations, Equations & Formulas

 Bars x 14.5038 = pounds per square inch (PSI)

 Kilograms (kg) x 2.205 = Pounds (P)

 Kilometers (km) x 1093.62 = yards (yds)

 Square centimeters x 0.155 = square inches

 Liters (l) x 0.0353 = cubic feet

 Square meters x 10.76 = square feet

 Square kilometers x 0.386 = square miles

 Cubic centimeters x 0.06102 = cubic inches

 Cubic meters x 35.315 = cubic feet

 Calculations, Equations & Formulas

 Inches (")(in) x 25.4 = millimeters (mm)

 Inches (")(in) x 2.54 = centimeters (cm)

 Inches (")(in) x 0.0254 = meters (m)

 Feet (')(ft) x 0.3048 = meters (m)

 Yards (yds) x 0.9144 = meters (m)

 Miles (mi) x 1.6093 = kilometers (km)

 Feet (')(ft) x 0.0003048 = kilometers (km)

 Calculations, Equations & Formulas

 Gallons (gals) x 3.78 = liters (l)

 Cubic feet x 28.316 = liters (l)
 Pounds (P) x 0.4536 = kilograms (kg)
 Square inches x 6.452 = square centimeters
 Square feet x 0.0929 = square meters
 Square miles x 2.59 = square kilometers
 Acres x 4046.85 = square meters
 Cubic inches x 16.39 = cubic centimeters
 Cubic feet x 0.0283 = cubic meters