Reference

Models in
Communication
Networks
The most important reference
models are:

OSIreference model.
TCP/IP reference model.
Introduction to ISO-OSI Model
 There are many users who use computer network and are located all over the
world. To ensure national and worldwide data communication ISO (ISO stands
for International Organization of Standardization.) developed this model. This is
called a model for open system interconnection (OSI) and is normally called as
OSI model. OSI model architecture consists of seven layers. It defines seven layers
or levels in a complete communication system.
Introduction to TCP/IP Reference Model
 TCP/IP is transmission control protocol and internet protocol.
Protocols are set of rules which govern every possible
communication over the internet. These protocols describe
the movement of data between the host computers or
internet and offers simple naming and addressing schemes.
 TCP/IP Reference model is explained in details other
chapter.
The OSI Model - Features, Principles and Layers
 There are n numbers of users who use computer network and are located
over the world. So to ensure, national and worldwide data communication,
systems must be developed which are compatible to communicate with
each other ISO has developed a standard. ISO stands for International
organization of Standardization. This is called a model for Open System
Interconnection (OSI) and is commonly known as OSI model.

 The ISO-OSI model is a seven layer architecture. It defines seven layers or

levels in a complete communication system. They are:

1. Application Layer
2. Presentation Layer
3. Session Layer
4. Transport Layer
5. Network Layer
6. Datalink Layer
7. Physical Layer
 Below we have the complete representation of the OSI model,
showcasing all the layers and how they communicate with each
other
 In the table below, we have specified the protocols used and
the data unit exchanged by each layer of the OSI Model.

Feature of OSI Model

 Big picture of communication over network is understandable
through this OSI model.
 We see how hardware and software work together.
 We can understand new technologies as they are developed.
 Troubleshooting is easier by separate networks.
 Can be used to compare basic functional relationships on
different networks.
Principles of OSI Reference Model
The OSI reference model has 7 layers. The principles that
were applied to arrive at the seven layers can be briefly
summarized as follows:

 A layer should be created where a different abstraction

is needed.
 Each layer should perform a well-defined function.
 The function of each layer should be chosen with an
eye toward defining internationally standardized
protocols.
 The layer boundaries should be chosen to minimize the
information flow across the interfaces.
 The number of layers should be large enough that
distinct functions need not be thrown together in the
same layer out of necessity and small enough that
architecture does not become unwieldy.
Functions of Different Layers
 Following are the functions performed by each layer of
the OSI model. This is just an introduction, we will cover
each layer in details in the coming tutorials.

OSI Model Layer 1: The Physical Layer

 Physical Layer is the lowest layer of the OSI Model.
 It activates, maintains and deactivates the physical
connection.
 It is responsible for transmission and reception of the
unstructured raw data over network.
 Voltages and data rates needed for transmission is
defined in the physical layer.
 It converts the digital/analog bits into electrical signal
or optical signals.
 Data encoding is also done in this layer.
OSI Model Layer 2: Data Link Layer

 Data link layer synchronizes the information which is to

be transmitted over the physical layer.
 The main function of this layer is to make sure data
transfer is error free from one node to another, over the
physical layer.
 Transmitting and receiving data frames sequentially is
managed by this layer.
 This layer sends and expects acknowledgements for
frames received and sent respectively. Resending of
non-acknowledgement received frames is also handled
by this layer.
 This layer establishes a logical layer between two nodes
and also manages the Frame traffic control over the
network. It signals the transmitting node to stop, when
the frame buffers are full.
OSI Model Layer 3: The Network Layer
 Network Layer routes the signal through different channels
from one node to other.
 It acts as a network controller. It manages the Subnet traffic.
 It decides by which route data should take.
 It divides the outgoing messages into packets and assembles
the incoming packets into messages for higher levels.

OSI Model Layer 4: Transport Layer

 Transport Layer decides if data transmission should be on
parallel path or single path.
 Functions such as Multiplexing, Segmenting or Splitting on the
data are done by this layer
 It receives messages from the Session layer above it, convert
the message into smaller units and passes it on to the Network
layer.
 Transport layer can be very complex, depending upon the
network requirements.
 Transport layer breaks the message (data) into small units so
that they are handled more efficiently by the network layer.
OSI Model Layer 5: The Session Layer
 Session Layer manages and synchronize the conversation between two different
applications.
 Transfer of data from source to destination session layer streams of data are
marked and are resynchronized properly, so that the ends of the messages are not
cut prematurely and data loss is avoided.

OSI Model Layer 6: The Presentation Layer

 Presentation Layer takes care that the data is sent in such a way that the receiver
will understand the information (data) and will be able to use the data.
 While receiving the data, presentation layer transforms the data to be ready for
the application layer.
 Languages(syntax) can be different of the two communicating systems. Under this
condition presentation layer plays a role of translator.
 It perfroms Data compression, Data encryption, Data conversion etc.

OSI Model Layer 7: Application Layer

 Application Layer is the topmost layer.
 Transferring of files disturbing the results to the user is also done in this layer. Mail
services, directory services, network resource etc are services provided by
application layer.
 This layer mainly holds application programs to act upon the received and to be
sent data.
Merits of OSI reference model
 OSI model distinguishes well between the services,
interfaces and protocols.
 Protocols of OSI model are very well hidden.
 Protocols can be replaced by new protocols as
technology changes.
 Supports connection oriented services as well as
connectionless service.

Demerits of OSI reference model

 Model was devised before the invention of
protocols.
 Fitting of protocols is tedious task.
 It is just used as a reference model.
Physical Layer - OSI Reference Model
Physical layer is the lowest layer of the OSI reference model. It is responsible for
sending bits from one computer to another. This layer is not concerned with the meaning of
the bits and deals with the setup of physical connection to the network and with transmission
and reception of signals.

Functions of Physical Layer

Following are the various functions performed by the Physical layer of the OSI model.
 Representation of Bits: Data in this layer consists of stream of bits. The bits must be encoded
into signals for transmission. It defines the type of encoding i.e. how 0's and 1's are
changed to signal.
 Data Rate: This layer defines the rate of transmission which is the number of bits per second.
 Synchronization: It deals with the synchronization of the transmitter and receiver. The
sender and receiver are synchronized at bit level.
 Interface: The physical layer defines the transmission interface between devices and
transmission medium.
 Line Configuration: This layer connects devices with the medium: Point to Point
configuration and Multipoint configuration.
 Topologies: Devices must be connected using the following topologies: Mesh, Star, Ring
and Bus.
 Transmission Modes: Physical Layer defines the direction of transmission between two
devices: Simplex, Half Duplex, Full Duplex.
 Deals with baseband and broadband transmission.
Design Issues with Physical Layer
 The Physical Layer is concerned with transmitting raw bits over
a communication channel.
 The design issue has to do with making sure that when one side
sends a 1 bit, it is received by the other side as a 1 bit and not
as a 0 bit.

Typical questions here are:

 How many volts should be used to represent a 1 bit and how
many for a 0?
 How many nanoseconds a bit lasts?
 Whether transmission may proceed simultaneously in both
directions?
 Whether transmission may proceed simultaneously in both
directions?
 How many pins the network connector has and what each pin
is used for?

 The design issues here largely deal with mechanical, electrical

and timing interfaces, and the physical transmission medium,
which lies below the physical layer.
Data Link Layer - OSI Model
 Data link layer performs the most reliable node to node
delivery of data. It forms frames from the packets that
are received from network layer and gives it to physical
layer. It also synchronizes the information which is to be
transmitted over the data. Error controlling is easily
done. The encoded data are then passed to physical.

 The main task of the data link layer is to transform a raw

transmission facility into a line that appears free of
undetected transmission errors to the network layer. It
accomplishes this task by having the sender break up
the input data into data frames(typically a few hundred
or few thousand bytes) and transmit the frames
sequentially. If the service is reliable, the receiver
confirms correct receipt of each frame by send back
an acknowledgement frame.
Functions of Data Link Layer

 Framing: Frames are the streams of bits received from the network layer
into manageable data units. This division of stream of bits is done by Data
Link Layer.
 Physical Addressing: The Data Link layer adds a header to the frame in
order to define physical address of the sender or receiver of the frame, if
the frames are to be distributed to different systems on the network.
 Flow Control: A flow control mechanism to avoid a fast transmitter from
running a slow receiver by buffering the extra bit is provided by flow
control. This prevents traffic jam at the receiver side.
 Error Control: Error control is achieved by adding a trailer at the end of the
frame. Duplication of frames are also prevented by using this mechanism.
Data Link Layers adds mechanism to prevent duplication of frames.
 Access Control: Protocols of this layer determine which of the devices has
control over the link at any given time, when two or more devices are
connected to the same link.
Design Issues with Data Link Layer

 The issue that arises in the data link layer(and most

of the higher layers as well) is how to keep a fast
transmitter from drowning a slow receiver in data.
Some traffic regulation mechanism is often
needed to let the transmitter know how much
buffer space the receiver has at the moment.
Frequently, the flow regulation and the error
handling are integrated.
 Broadcast networks have an additional issue in the
data link layer: How to control access to the
shared channel. A special sublayer of the data link
layer, the Medium Access Control(MAC) sublayer,
deals with this problem.
Network Layer - OSI Model

The network Layer controls the operation of the

subnet. The main aim of this layer is to deliver packets
from source to destination across multiple links
(networks). If two computers (system) are connected
on the same link, then there is no need for a network
layer. It routes the signal through different channels to
the other end and acts as a network controller.

 Italso divides the outgoing messages into packets

and to assemble incoming packets into messages
for higher levels.
 In broadcast networks, the routing problem is
simple, so the network layer is often thin or even
non-existent.
Functions of Network Layer
 It translates logical network address into physical address.
Concerned with circuit, message or packet switching.
 Routers and gateways operate in the network layer.
Mechanism is provided by Network Layer for routing the
packets to final destination.
 Connection services are provided including network layer
flow control, network layer error control and packet sequence
control.
 Breaks larger packets into small packets.
Design Issues with Network Layer

 A key design issue is determining how packets are routed from

source to destination. Routes can be based on static tables that
are wired into the network and rarely changed. They can also be
highly dynamic, being determined anew for each packet, to
reflect the current network load.
 If too many packets are present in the subnet at the same time,
they will get into one another's way, forming bottlenecks.
The control of such congestion also belongs to the network layer.
 Moreover, the quality of service provided(delay, transmit time,
jitter, etc) is also a network layer issue.
 When a packet has to travel from one network to another to get to
its destination, many problems can arise such as:
 The addressing used by the second network may be different from the
first one.
 The second one may not accept the packet at all because it is too
large.
 The protocols may differ, and so on.
 It is up to the network layer to overcome all these problems to
allow heterogeneous networks to be interconnected.
Transport Layer - OSI Model

 The basic function of the Transport layer is to accept data

from the layer above, split it up into smaller units, pass these
data units to the Network layer, and ensure that all the pieces
arrive correctly at the other end.
 The Transport layer also determines what type of service to
provide to the Session layer, and, ultimately, to the users of the
network. The most popular type of transport connection is
an error-free point-to-point channel that delivers messages or
bytes in the order in which they were sent.
 The Transport layer is a true end-to-end layer, all the way from
the source to the destination. In other words, a program on
the source machine carries on a conversation with a similar
program on the destination machine, using the message
headers and control messages.
Functions of Transport Layer

 Service Point Addressing: Transport Layer header includes service point

address which is port address. This layer gets the message to the correct
process on the computer unlike Network Layer, which gets each packet
to the correct computer.
 Segmentation and Reassembling: A message is divided into segments;
each segment contains sequence number, which enables this layer in
reassembling the message. Message is reassembled correctly upon
arrival at the destination and replaces packets which were lost in
transmission.
 Connection Control: It includes 2 types:
 Connectionless Transport Layer : Each segment is considered as an
independent packet and delivered to the transport layer at the destination
machine.
 Connection Oriented Transport Layer : Before delivering packets, connection is
made with transport layer at the destination machine.
 Flow Control: In this layer, flow control is performed end to end.
 Error Control: Error Control is performed end to end in this layer to ensure
that the complete message arrives at the receiving transport layer
without any error. Error Correction is done through retransmission.
Design Issues with Transport Layer

 Accepting data from Session layer, split it into

segments and send to the network layer.

 Ensure correct delivery of data with efficiency.

 Isolateupper layers from the technological

changes.

 Error control and flow control.

Session Layer - OSI Model

 The Session Layer allows users on different machines to

establish active communication sessions between them.

 It's main aim is to establish, maintain and synchronize the

interaction between communicating systems. Session
layer manages and synchronize the conversation
between two different applications. In Session layer,
streams of data are marked and are resynchronized
properly, so that the ends of the messages are not cut
prematurely and data loss is avoided.
Functions of Session Layer

 Dialog Control : This layer allows two systems to start

communication with each other in half-duplex or full-duplex.
 Token Management: This layer prevents two parties from
attempting the same critical operation at the same time.
 Synchronization : This layer allows a process to add checkpoints
which are considered as synchronization points into stream of
data. Example: If a system is sending a file of 800 pages,
adding checkpoints after every 50 pages is recommended. This
ensures that 50 page unit is successfully received and
acknowledged. This is beneficial at the time of crash as if a
crash happens at page number 110; there is no need to
retransmit 1 to100 pages.

Design Issues with Session Layer

 Toallow machines to establish sessions between

them in a seamless fashion.

 Provide enhanced services to the user.

 To manage dialog control.

 To
provide services such as Token
management and Synchronization.
Presentation Layer - OSI Model

The primary goal of this layer is to take care of

the syntax and semantics of the information exchanged
between two communicating systems. Presentation layer
takes care that the data is sent in such a way that the
receiver will understand the information(data) and will be
able to use the data. Languages(syntax) can be different
of the two communicating systems. Under this condition
presentation layer plays a role translator.

In order to make it possible for computers with

different data representations to communicate, the data
structures to be exchanged can be defined in
an abstract way. The presentation layer manages
these abstract data structures and allows higher-level data
structures(eg: banking records), to be defined and
exchanged.
Functions of Presentation Layer

 Translation: Before being transmitted, information in the form of characters

and numbers should be changed to bit streams. The presentation layer is
responsible for interoperability between encoding methods as different
computers use different encoding methods. It translates data between the
formats the network requires and the format the computer.

 Encryption: It carries out encryption at the transmitter and decryption at

the receiver.

 Compression: It carries out data compression to reduce the bandwidth of

the data to be transmitted. The primary role of Data compression is to
reduce the number of bits to be 0transmitted. It is important in transmitting
multimedia such as audio, video, text etc.
Design Issues with Presentation Layer

To manage and maintain

the Syntax and Semantics of the
information transmitted.

Encodingdata in a standard agreed

upon way. Eg: String, double, date,
etc.

Perform Standard Encoding on wire.

Application Layer - OSI Model

 The Application Layer contains a variety of protocols

that are commonly needed by users. One widely-used
application protocol is HTTP(HyperText Transfer Protocol),
which is the basis for the World Wide Web. When a
browser wants a web page, it sends the name of the
page it wants to the server using HTTP. The server then
sends the page back.

 Other Application protocols that are used are: File

Transfer Protocol(FTP), Trivial File Transfer
Protocol(TFTP), Simple Mail Transfer
Protocol(SMTP), TELNET, Domain Name System(DNS) etc.
Functions of Application Layer

 Mail Services: This layer provides the basis for E-mail forwarding and storage.

 Network Virtual Terminal: It allows a user to log on to a remote host. The application creates
software emulation of a terminal at the remote host. User's computer talks to the software
terminal which in turn talks to the host and vice versa. Then the remote host believes it is
communicating with one of its own terminals and allows user to log on.

 Directory Services: This layer provides access for global information about various services.

 File Transfer, Access and Management (FTAM): It is a standard mechanism to access files and
manages it. Users can access files in a remote computer and manage it. They can also retrieve
files from a remote computer.
Design Issues with Application Layer

There are commonly reoccurring problems that occur in

the design and implementation of Application Layer
protocols and can be addressed by patterns from several
different pattern languages:

 Pattern Language for Application-level

Communication Protocols

 Service Design Patterns

 Patterns of Enterprise Application Architecture

 Pattern-Oriented Software Architecture

The TCP/IP Reference Model

TCP/IP means Transmission Control Protocol and

Internet Protocol. It is the network model used in the
current Internet architecture as well. Protocols are set
of rules which govern every possible communication
over a network. These protocols describe the
movement of data between the source and
destination or the internet. They also offer simple
naming and addressing schemes.
Protocols and networks in the TCP/IP model:
Overview of TCP/IP reference
model
TCP/IP that is Transmission Control Protocol and Internet
Protocol was developed by Department of Defence's
Project Research Agency (ARPA, later DARPA) as a part of
a research project of network interconnection to connect
remote machines.

The features that stood out during the research, which led
to making the TCP/IP reference model were:

 Support for a flexible architecture. Adding more

machines to a network was easy.
 The network was robust, and connections remained
intact untill the source and destination machines were
functioning.
 The overall idea was to allow one application on one
computer to talk to(send data packets) another
application running on different computer.
Different Layers of TCP/IP Reference Model
Below we have discussed the 4 layers that form the
TCP/IP reference model:
Layer 1: Host-to-network Layer
 Lowest layer of the all.
 Protocol is used to connect to the host, so that the packets can be sent
over it.
 Varies from host to host and network to network.

Layer 2: Internet layer

 Selection of a packet switching network which is based on a
connectionless internetwork layer is called a internet layer.
 It is the layer which holds the whole architecture together.
 It helps the packet to travel independently to the destination.
 Order in which packets are received is different from the way they are
sent.
 IP (Internet Protocol) is used in this layer.
 The various functions performed by the Internet Layer are:
 Delivering IP packets
 Performing routing
 Avoiding congestion
Layer 3: Transport Layer
 It decides if data transmission should be on parallel path or single path.
 Functions such as multiplexing, segmenting or splitting on the data is done by
transport layer.
 The applications can read and write to the transport layer.
 Transport layer adds header information to the data.
 Transport layer breaks the message (data) into small units so that they are handled
more efficiently by the network layer.
 Transport layer also arrange the packets to be sent, in sequence.

Layer 4: Application Layer

 The TCP/IP specifications described a lot of applications that were at the top of the
protocol stack. Some of them were TELNET, FTP, SMTP, DNS etc.
 TELNET is a two-way communication protocol which allows connecting to a remote
machine and run applications on it.
 FTP(File Transfer Protocol) is a protocol, that allows File transfer amongst computer
users connected over a network. It is reliable, simple and efficient.
 SMTP(Simple Mail Transport Protocol) is a protocol, which is used to transport
electronic mail between a source and destination, directed via a route.
 DNS(Domain Name Server) resolves an IP address into a textual address for Hosts
connected over a network.
 It allows peer entities to carry conversation.
 It defines two end-to-end protocols: TCP and UDP
 TCP(Transmission Control Protocol): It is a reliable connection-oriented protocol which
handles byte-stream from source to destination without error and flow control.
 UDP(User-Datagram Protocol): It is an unreliable connection-less protocol that do not
want TCPs, sequencing and flow control. Eg: One-shot request-reply kind of service.
Merits of TCP/IP model
 It operated independently.
 It is scalable.
 Client/server architecture.
 Supports a number of routing protocols.
 Can be used to establish a connection between
two computers.

Demerits of TCP/IP
 In this, the transport layer does not guarantee
delivery of packets.
 The model cannot be used in any other
application.
 Replacing protocol is not easy.
 It has not clearly separated its services, interfaces
and protocols.
Comparison of OSI and TCP/IP
Reference Model
Now it's time to compare both the reference model that
we have learned till now. Let's start by addressing the
similarities that both of these models have.

Following are some similarities between OSI Reference

Model and TCP/IP Reference Model.

 Both have layered architecture.

 Layers provide similar functionalities.
 Both are protocol stack.
 Both are reference models.

Difference between OSI and TCP/IP Reference Model
Following are some major differences between OSI Reference Model and TCP/IP Reference
Model, with diagrammatic comparison below.

TCP/IP(Transmission Control Protocol / Internet

OSI(Open System Interconnection)
Protocol)

1. TCP/IP model is based on standard protocols

1. OSI is a generic, protocol independent
around which the Internet has developed. It is
standard, acting as a communication
a communication protocol, which allows
gateway between the network and end user.
connection of hosts over a network.

2. In TCP/IP model the transport layer does not

2. In OSI model the transport layer guarantees
guarantees delivery of packets. Still the TCP/IP
the delivery of packets.
model is more reliable.

3. Follows vertical approach. 3. Follows horizontal approach.

4. OSI model has a separate Presentation layer 4. TCP/IP does not have a separate
and Session layer. Presentation layer or Session layer.

5. Transport Layer is both Connection Oriented

5. Transport Layer is Connection Oriented.
and Connection less.
6. Network Layer is both 6. Network Layer is Connection
Connection Oriented and less.
Connection less.
7. OSI is a reference model around 7. TCP/IP model is, in a way
which the networks are built. implementation of the OSI model.
Generally it is used as a guidance
tool.
8. Network layer of OSI model 8. The Network layer in TCP/IP
provides both connection model provides connectionless
oriented and connectionless service.
service.
9. OSI model has a problem of 9. TCP/IP model does not fit any
fitting the protocols into the protocol
model.
10. Protocols are hidden in OSI 10. In TCP/IP replacing protocol is
model and are easily replaced as not easy.
the technology changes.
11. OSI model defines services, 11. In TCP/IP, services, interfaces
interfaces and protocols very and protocols are not clearly
clearly and makes clear distinction separated. It is also protocol
between them. It is protocol dependent.
independent.
12. It has 7 layers 12. It has 4 layers
Diagrammatic Comparison between OSI Reference
Model and TCP/IP Reference Model