Scribd
Upload
464 views

Embedded Projector

To design and implement a project which is the projector with embedded system using WI-FI technology.

Uploaded by

NITHYA
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
464 views

Embedded Projector

To design and implement a project which is the projector with embedded system using WI-FI technology.

Uploaded by

NITHYA
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 26

IMPLEMENTATION OF

EMBEDDED PROJECTOR
SYSTEM BY USING
WI-FI TECHNOLOGY
2015-2019 Batch
Dept of Electronics & Communication
Engineering,
Jayalakshmi Institute of Technology,
Thoppur-636352.
BATCH MEMBERS
 B.GOPIKA - 610915106014
 B.NITHYA - 610915106036
 S.PRIYA - 610915106041
 M.PAVITHRA - 610915106307

GUIDED BY
Mr. G . RAJAMANICKAM, M.E.,( PhD).,
Assistant professor,
Dept of Electronics and Communication
Engineering.
OBJECTIVE
To design and implement a project
which is the projector with embedded
system using WI-FI technology.
ABSTRACT
 We present an automatic embedded projector
system with wireless network.
 Embedded system substitutes for the personal
computer system.
 The system solves the problem of cable complex
layout of projector.
 We also recommend a new remote control handle
with wireless network and USB storage port,
which can read files from flash disk or android
device and upload these files to player system and
can operate the player system of projector
completely.
EXISTING SYSTEM
In the existing system, projector depends on
PC or laptop.
Conventional projector has trouble with
complex cable layout.
VGA cable was used for data transmission.
A common projector has a cable which
carries image input signal and the another
end of cable is connected by play device
such as PC station.
PROBLEMS IN EXISTING
SYSTEM
In a business forum, everyone who will give
a lecture have to pull out the cable of
projector from previous PC and plug it in
his PC, it is too inconvenient.
When we often pull out and plug the cable
interface many times, the spins of cable
interface will be broke likely, so the
projector doesn’t work no longer until the
old cable interface is replaced.
PROPOSED SYSTEM
Embedded projector system is independent
on PC.
As we takes IEEE 802.11b wireless
projector, projector has no complex cable
layout.
By uniform remote control way, it can
operate both player system and projector
remotely.
INTRODUCTION
 We presents a framework of automatic embedded
projector system with wireless network.
 We can operate the player system and physical
projector by a new remote control handle with an
uniform way.
 Our project not only has no trouble with cable
layout but also has independent of PC.
BLOCK DIAGRAM
HARDWARE STRUCTURE OF
PLAYER SYSTEM SERVER
PROJECTOR SERVER
The projector player server is composed of,
1. ARM microprocessor
2. VGA output module
3. Wireless module
4. Storage module
5. Power module
HARDWARE ARCHITECTURE OF
REMOTE CONTROL HANDLE
DISPLAY REMOVABLE
MODULE STORAGE
(pin 30 )

INFRARED S3C2440A-40 USB


CONTROL MICRO MODULE
MODULE PROCESSOR (pin 31)
(pin 12-19)

WLAN SD
MODULE MEMORY
(pin 10) CARD
(pin 32)
HARDWARE ARCHITECTURE
OF REMOTE CONTROL HANDLE
The hardware architecture of remote
control handle includes,
1.Display module
2.Infrared control module
3.WLAN module
4.USB module
5.SD memory card
SOFTWARE ARCHITECTURE
SOFTWARE UPDATE
CENTER
PHYSICAL
PROJECTOR
SOFTWARE
PLAYER SERVER
UPDATE CLIENT
CONTROLLER

REMOTE APP SOFTWARE


CONTROL
SERVER WEB SERVER

REMOTE CONTROL HANDLER WI-FI by


ANDROID
FILE MANAGER
TOOLS
CONTROL USB FLASH
MANAGER DISK
SOFTWARE ARCHITECTURE
The software architecture includes the two
major blocks.
They are,
1. Software update center
2.Remote control handler
SOFTWARE UPDATE CENTRE
 The software update center is used to download
software updates to a network shared folder and
to copy the source files on distribution points.
 The software update center includes ,
1.Player server controller
2.Software update client
3.Remote control software
4.App software
5.Web server
EZCAST APPLICATION
EZ Cast app for Android version, is used for
the WI-FI data transmission.
It is developed by Winner wave.
Via EZ Cast devices or platforms, we can
display or exchange our multimedia from
Android embedded smart phone and pad
wirelessly.
REMOTE CONTROL HANDLE
Remote control handle is used to handle the
devices from a distance under the control of
administrator by means of infrared signals
Remote control handle includes,
1.File Manager
2.Control Manager
3. Auxiliary Tools
ADVANTAGES
The wireless projector is easier to install.
They are light weighted and easily portable.
The cost or benefit ratio is quite good.
Without the need of any cable, wireless
projector can connect to the source.
It is simple and easy to utilize.
SPECIFICATIONS
A projector’s specification needs to show
both,
 High color brightness
 High white brightness
With 3000 lumens of color brightness and
3000 lumens of white brightness, the
EX7220 features the ultimate in widescreen
HD performance.
It also offers a fast wireless connection to
our Smartphone or tablet.
EXPERIMENTAL RESULT OF
A POWERPOINT FILE
EXPERIMENTAL RESULT
FOR PLAYING VIDEO FILE
CONCLUSION
The recommended player system is
controlled by uniform way, and it doesn’t
depend on PCs and digital signal cables.
The main limitation of our current solution
is that all of application software packages
are required to run on Android.
We will continue to improve the automatic
embedded projector system to support
more software in a embedded hardware
system.
APPLICATIONS
 Wireless Projectors are widely adopted in
many fields with the rapid advances of
modern technologies.
Such as,
1.Educational Institutions
2.Business conferences
3.Domestic entertainments.
THANK YOU
QUERIES?

You might also like