1

Basic Electronics

Raja Muzammil Muneer

Computer Science Department
Faculty of Computer Science
CFE Group of Colleges
[email protected].

Slide 1- 2
 Readings

• TEXTBOOK
[1] Basic Electronics by B.L Tharaja
[2] Basic Electronics By Floyd

• REFERENCES
[1]Course Outline,Paper Pattern and Past Papers may obtain from
Bookshop.

Slide 1- 3
 Class Format

• Presentation by myself

• Sometimes we have work groups in class

• Sometimes we have Surprise quizzes

Slide 1- 4
 Class Rules

• Attendance is a vey important

• Assignments must be delivered on time

– All assignments are individual assignments unless it is

clearly stated that you can work on groups.

– Assignments or part of them that are copied (including the

programming assignments) will be punished by -2
assignments.

5
 Class Rules
• You can bring anything to drink but
NO FOOD PLEASE 

• When you come in , DO NOT knock on the door as well as

when you leave

• I do not take attendance every class but if you miss one , it

might greatly affect your Internal grade.
• Mobile Phones are not allowed to use in class.
Who are you?

Slide 1- 7
 What is
Basic Electronics?
Electronics

9
 Aims for this lecture

• Describe the physics of the PN junction

• Describe the principles behind important electrical
components for detectors
• Provide working knowledge of these components
• Give examples of the components used in Computer

10
 Lecture Outline

• Theory and operation of electrical components

– semiconductors
– pn junction
– diode
– photodiode
– light emitting diode (LED)
– transistor
– field-effect transistor (FET)
– junction field-effect transistor (JFET)
– metal-oxide field-effect transistor (MOSFET)
• Detector applications
– pixel photodiode
– source follower
– amplifier

11
Semiconductors

12
 Periodic Table and Groups

• Material properties depend on outer electron shell.

• Format of periodic table Associates population of outer shell
with columns (groups).

13
 Conductors

• Li, Na, K, Cu, Ag, and Au have a single valence electron.

These elements all have similar chemical properties. These
atoms readily give away one electron to react with other
elements. The ability to easily give away an electron makes
these elements excellent conductors.

• Periodic table group IA elements: Li, Na, and K, and group IB

elements: Cu, Ag, and Au have one electron in the outer, or
valence, shell, which is readily donated. Inner shell electrons:
For n= 1, 2, 3, 4; 2n2 = 2, 8, 18, 32.

14
http://www.allaboutcircuits.com/vol_3/chpt_2/3.html
 Insulators

• Group VIIA elements: Fl, Cl, Br, and I all have 7 electrons in
the outer shell. These elements readily accept an electron to fill
up the outer shell with a full 8 electrons. (Figure below) If
these elements do accept an electron, a negative ion is formed
from the neutral atom. These elements which do not give up
electrons are insulators.

• Periodic table group VIIA elements: F, Cl, Br, and I with 7

valence electrons readily accept an electron in reactions with
other elements.

15
 Noble (Inert) Gases
• Group VIIIA elements: He, Ne, Ar, Kr, Xe all have 8 electrons in the
valence shell. (Figure below) That is, the valence shell is complete meaning
these elements neither donate nor accept electrons. Nor do they readily
participate in chemical reactions since group VIIIA elements do not easily
combine with other elements. These elements are good electrical insulators
and are gases at room temperature.

• Group VIIIA elements: He, Ne, Ar, Kr, Xe are largely unreactive since the
valence shell is complete.

16
 Semiconductors
• Group IVA elements: C, Si, Ge, having 4 electrons in the valence shell,
form compounds by sharing electrons with other elements without forming
ions. This shared electron bonding is known as covalent bonding. Note that
the center atom (and the others by extension) has completed its valence
shell by sharing electrons. Note that the figure is a 2-d representation of
bonding, which is actually 3-d. It is this group, IVA, that we are interested
in for its semiconducting properties.

• (a) Group IVA elements: C, Si, Ge having 4 electrons in the valence shell,
(b) complete the valence shell by sharing electrons with other elements.

17
 Energy Bands in Conductors

• When atoms combine to form substances, the outermost shells,

subshells, and orbitals merge, providing a greater number of
available energy levels for electrons to assume. When large
numbers of atoms are close to each other, these available
energy levels form a nearly continuous band wherein electrons
may move as illustrated in Figure.

Electron band overlap in metallic elements. 18

 Energy Bands in Insulators

• In some substances, a substantial gap remains between the

highest band containing electrons (the valence band) and the
next band, which is empty (the conduction band). As a result,
valence electrons are “bound” to their constituent atoms and
cannot become mobile within the substance without a
significant amount of imparted energy. These substances are
electrical insulators.

Electron band separation in insulating substances. 19

 Energy Bands in Semiconductors

• Materials that fall within the category of semiconductors have

a narrow gap between the valence and conduction bands.
Thus, the amount of energy required to motivate a valence
electron into the conduction band where it becomes mobile is
quite modest.

Electron band separation in semiconducting substances, (a) multitudes of semiconducting

close atoms still results in a significant band gap, (b) multitudes of close metal atoms for
reference. 20
 Intrinsic Semiconductors
• Four electrons in the valence shell of a semiconductor form covalent bonds
to four other atoms. All electrons of an atom are tied up in four covalent
bonds, pairs of shared electrons. Electrons are not free to move about the
crystal lattice. Thus, intrinsic, pure, semiconductors are relatively good
insulators as compared to metals.

(a) Intrinsic semiconductor is an insulator having a complete electron shell.

(b) However, thermal energy can create few electron hole pairs resulting in
weak conduction.

21
 Dopants in Semiconductors
• The crystal lattice contains atoms having four electrons in the outer shell, forming four covalent bonds to
adjacent atoms.
• The addition of a phosphorus atom with five electrons in the outer shell introduces an extra electron into the
lattice as compared with the silicon atom.
• The impurity forms four covalent bonds to four silicon atoms with four of the five electrons, fitting into the
lattice with one electron left over.
• The spare electron is not strongly bonded to the lattice as the electrons of normal Si atoms are. It is free to
move about the crystal lattice.
• Application of an external electric field produces strong conduction in the doped semiconductor in the
conduction band. Heavier doping levels produce stronger conduction.
• Thus, a poorly conducting intrinsic semiconductor has been converted into a good electrical conductor.

• (a) Outer shell electron configuration of donor N-type Phosphorus, Silicon (for reference), and acceptor P-
type Boron. (b) N-type donor impurity creates free electron (c) P-type acceptor impurity creates hole, a
positive charge carrier.

22
Periodic Table and Detector Material

23
PN Junction

24
N-type

25
P-type

26
 Conduction in p/n-type Semiconductors
• In n-type material, excess electrons move freely in an electric field.
• In p-type material, holes migrate as electrons move in an electric field.

27
Migration of Electrons and Holes

28
 pn Junction and Biasing
• A pn junction is a sandwich of p-type
and n-type material.
• A depletion region (free of excess
charge) forms.
• An intrinsic (built-in) electric field
exists in this region.
• An external bias can increase or
decrease the width of the depletion
region and the voltage difference
between the p and n regions.

29
Carrier Densities

32
 PN Junction: IV Characteristics
• Current-Voltage Relationship

eV / kT
I  I o [e  1]
• Forward Bias: current exponentially increases.
• Reverse Bias: low leakage current equal to ~Io.
• Ability of p-n junction to pass current in only one direction is known as “rectifying” behavior.

33
 pn Junction Review
• PN junctions are fabricated in a monocrystalline piece of semiconductor with both a
P-type and N-type region in proximity at a junction.
• The transfer of electrons from the N side of the junction to holes annihilated on the
P side of the junction produces a built-in voltage. This is usually 0.6 V to 0.7 V in
silicon, and varies depending on material and dopant concentration.
• Forward bias requires a positive voltage to be applied to the p-side with respect to
the n-side. Reverse bias requires a positive voltage to be applied to the n-side with
respect to the p-side.
• A forward biased PN junction conducts a current once the built-in voltage is
overcome (the diode will “turn on”). The external applied potential accelerates
majority carriers across the junction where recombination takes place, allowing
current flow.
• A reverse biased PN junction conducts almost no current. The applied reverse bias
adds to the built-in potential barrier, impeding current flow. It also increases the
thickness of the non-conducting depletion region.
• Reverse biased PN junctions show a temperature dependent reverse leakage current.
This is less than a µA in small silicon diodes.

34
Diode

35
 Definition of a Diode
• A diode is an electronic component that
– has two terminals,
– limits current to one direction, and
– has nonlinear (non-Ohmic) behavior.
• Diodes are p-n junctions that “turn on” at a specific voltage.
• Diodes have an anode (p-side) and a cathode (n-side).
• Positive current normally flows from the anode to the cathode.
• Diodes are useful for protecting circuitry from harmful voltage
or current.
• Diodes are a basic building block of the charge-collecting
element in many detectors.

36
Photodiode

37
 Definition of a Photodiode

• A photodiode is a diode that converts photons into voltage or

current.
• When an electron absorbs a photon (of sufficient energy), the
electron moves to the conduction band (creating an electron-
hole pair).
• The photo-generated charge migrates to the depletion region
where it recombines with ions. This changes the voltage across
the depletion region; the magnitude of the change gets
converted into charge and so into number of electrons.
• A second way to count photo-generated charge is by
monitoring the current through a reverse-biased diode. The
leakage current will increase proportionately to the amount of
photo-generated charge.
38
Photon Detection in Photodiode

39
Response of Photodiode to Light

40
 Avalanche Photodiode

• This example is for a p-i-p-n diode (p-

type, intrinsic, and n-type) regions.
• Photons are absorbed in the intrinsic
layer.
• Photogenerated electrons drift to pn+
junction where they are accelerated
through high field, producing more
electrons through impact ionization.
• Benefit: one photon gives large signal.

41
PIN Photodiode

42
Band Gaps

43
Light-Emitting Diode

44
 Definition of a Light Emitting Diode (LED)

• A Light Emitting Diode converts electrical current into light.

• LEDs are based on pn junctions under forward bias.
• The wavelength of emitted light is fixed for a material and
depends on the energy gap between the conduction band and
the hole energy level.
• LEDs tend to be more efficient for lighting applications as
compared to ordinary light bulbs that convert heat into
blackbody radiation (most of which cannot be seen by the
human eye).

45
LED Cutaway

46
LED Animation

47
 LED Construction

• Efficient light emitter is also an efficient absorber of radiation

therefore, a shallow p-n junction required.
– Must be thin enough to prevent reabsorption of photons.
• The p-n junction will be forward biased with contacts made by
metallisation to the upper and lower surfaces.
• Output material must be transparent so photon can escape.
• ‘Right coloured LED’  hc/ = Ec-Ev = Eg
 so choose material with the right Eg

49
 Visible LED

The band gap of the materials that we use must be in the

region of visible wavelength = 390-770nm. This coincides
with the energy value of 3.18eV- 1.61eV which corresponds
to colors as stated below:

Material Band Gap (eV)

The band gap, Eg
Violet ~ 3.17eV that the
ZnS 3.6

Blue ~ 2.73eV semiconductor

ZnO 3.2

Green ~ 2.52eV must posses to GaP 2.25

emit each light CdSe 1.74

Yellow ~ 2.15eV CdTe 1.44
Orange ~ 2.08eV GaAs 1.43
Red ~ 1.62eV InP 1.27
Si 1.11
GaSb 0.68
Ge 0.66

50
 1907 Publication report on Curious Phenomenon

On applying a potential to
a crystal of carborundum
(SiC), the material gave
out a yellowish light

H.J. Round, Electrical World, 49, 309, 1907

51
Transistor

53
 Definition of a Transistor
• A transistor controls current through a circuit via an injected
current, i.e. it behaves like a current-controlled resistor.
• A Bipolar Junction Transistor has three terminals:
– Base (B): the control
– Collector (C): the source of the current
– Emitter (E): the destination of the current

iC Circuit Symbol
-
vBC collector n
+
base p
+ iB
vBE - emitter n
iE

Schematics shown are for an npn BJT, but pnp BJTs also exist.

54
 BJT Transistor Operation

• The BJT operation is as follows:

– apply a voltage to the base with respect to
the emitter (forward bias the base-emitter p-n junction)
– this voltage sets up an electric field in the “body” of the device
– the electric field supports the flow of charge from collector to emitter if
the base-emitter p-n junction is forward biased.

• Most common (and original) form is the bipolar junction

transistor (BJT), although the MOSFET has completely taken
over almost all applications.
55
 Transistor Architecture

• NPN BJT has three layers with an emitter and collector at the
ends, and a very thin base in between (Figure a).
• Base-collector is reverse biased, increasing the width of the
associated depletion region (Figure b).

56
 Transistor in Operation

• The transistor base-emitter current controls the current from its

“collector” to “emitter.”
• At a certain threshold, the transistor behaves like an “on”
switch.

57
Transistor: Water Flow Model

Water flow in B raises the

plunger so that water can flow
from C to E.

Small flow turns on and off

bigger flow.

Put signal on B, transfer signal

C to E.

58
 Transistor Architecture

• Base-emitter is forward biased above the threshold voltage to

overcome depletion field (Figure b).
• Most of the electrons from the emitter diffuse through the thin
base into the collector, which leads to a coupling of the E-B
and C-B junction currents.
• Changing the small base current produces a larger change in
collector current.
• If the base voltage falls below threshold, the large emitter-
collector current ceases to flow.

59
 Transistor Architecture (NPN vs. PNP)

• PNP transistor uses opposite polarity.

• Note that for both types of transistors, the base-emitter
junction is forward biased and the base-collector junction is
reverse biased.

60
Common Transistor Packages

61
 Historical Prediction of Transistor Effect
• Effect predicted as early as 1925
by Julius Lilienfeld (“Field
Effect”)
• Patent issued in the 1926 and
1933
• Technology at the time was not
sufficiently advanced to produce
doped crystals with enough
precision for the effect to be seen

62
 “Invention” of Transistor

• Shockley, Brattain, and Bardeen tried making a field effect

transistor in 1947, but got sidetracked into inventing the
bipolar transistor instead (for which they won Nobel Prize).

63
 Now for the rub!

• Shockley's field effect transistor theory was published in 1952.

However, the materials processing technology was not mature
enough until 1960 when John Atalla produced a working
device.
• While re-invention of transistors some twenty years after the
Lilienfeld's work earned Bell Telephone Laboratories three
Nobel Prizes, they were forced to abandon most patent claims
to the field-effect transistor (which dominates modern
electronics) because of Lilienfeld's "prior art."

64
 Transistor Invention History Epilogue

• The three argued over patents and the team split up.
• Schockley founded Silicon Valley in 1956 with money from
his buddy Beckman. He eventually left physics to pursue
genetics research. He was mad that everyone made money but
him. (His early co-workers got fed up and started Fairchild,
and then Intel).
• Bardeen went to the University of Illinois. In 1957, along with
post-doctoral student Leon Cooper and graduate student Bob
Schrieffer, he developed the first theory on superconductivity.
To this day, this theory is known as the BCS theory (for
Bardeen, Cooper, and Schrieffer)
• Brattain stayed at Bell Labs until he retired and then taught
Physics at Whitman College.
65
Evolution of the Transistor

66
Field Effect Transistor

67
 Definition of a FET
• The field-effect transistor (FET) is a generic term for a device that controls
current through a circuit via an applied voltage, i.e. it behaves like a
voltage-controlled resistor.
• There are two main varieties of FETs:
– junction FETs (JFETs)
– metal-oxide-semicondutor FETs (MOSFETs)
• A FET has three terminals:
– gate (G): as in the “gate” keeper of the current
– source (S): the source of the electrons
– drain (D): the destination of the electrons
JFET (n-channel) MOSFET (NMOS)
vS vG vD vS vD
vG metal

n+ p+ n+ n+ n+ oxide

n
p+ p

vG 68
 FET Operation
• The FET operation is as follows:
– apply a voltage to the gate
– this voltage sets up an electric field in the “body” of the device
– electric field inhibits/supports the flow of charge from source to drain
• FETs can be made in n-channel or p-channel variety.
• FETs are “Unipolar” (conduct either electrons or holes, not both).

69
Junction Field-Effect Transistor (JFET)

70
 JFET Architecture
• An n-channel JFET is composed of:
– n-type body
– p-type gate
• Gate is generally reverse biased to control current flow.
• Channel conducts regardless of polarity between source and drain.
• Typical output transimpedance for a JFET is a few hundred Ohms.

71
 JFET Architecture

• The gate and channel form depletion regions.

• A stronger reverse bias makes the depletion regions wider and
closer to each other.
• Therefore, voltage controls channel resistance.

N-channel JFET: (a) Depletion at gate diode. (b) Reverse biased gate diode increases depletion region. (c) Increasing
reverse bias enlarges depletion region. (d) Increasing reverse bias pinches-off the S-D channel.

72
 JFET Architecture

• The basic architecture can be realized in a variety of

geometrical relationships while still preserving the basic
function.
• Practically realized devices often have the contacts all on one
side of the device.

Junction field effect transistor: (a) Discrete device cross-section, (b) schematic
symbol, (c) integrated circuit device cross-section.
75
 JFET Characteristic Curve

• IV curve shows two areas of operation.

– At low drain-source voltages, it behaves like a variable resistance
whose value is controlled by the applied gate-source voltage.
– At higher drain-source voltages, it passes a current whose value
depends on the applied gate-source voltage. In most circuits it is used in
this ‘high voltage’ region and acts as a voltage controlled current
source.

76
JFET 3D Characteristic Curve

source

gate

drain

77
 Advantages of JFET

• controlled by the applied gate voltage, they draw very little

gate current and hence present a very high input resistance to
any signal source
• low noise at low frequency
• the reverse-biased junctions can tolerate a considerable amount
of radiation damage without any appreciable change in FET
operation.

78
Operating a JFET

79
 JFET Review

• The JFET is called “unipolar” because conduction in the

channel is due to one type of carrier.
• Application of reverse bias to the gate varies the channel
resistance by expanding the gate diode depletion region.
• With sufficient bias, the channel is pinched, and current ceases
to flow.
• The input impedance is high vs. BJT, but low vs. MOSFET.
• JFETs are virtually obsolete in ICs, but still used in discretes.

80
Metal-Oxide Field-Effect Transistor
(MOSFET)

81
 Definition of Metal-Oxide FET (MOSFET)

• A MOSFET is a FET with an insulated gate.

• Today, most transistors are MOSFETs in digital integrated
circuits.
• While the MOSFET has source, gate, and drain terminals like
the FET, its gate lead is not in contact with the body of the
device.
• The MOSFET has an higher input impedance than the JFET
(10 to 100 million mega-ohms). Therefore, the MOSFET is
even less of a load on preceding circuits.

82
 MOSFET Architecture
• The MOSFET gate is a metallic or polysilicon layer atop a silicon dioxide
insulator. The gate bears a resemblance to a metal oxide
semiconductor (MOS) capacitor.
• When charged, the plates of the capacitor take on the charge polarity of the
respective battery terminals. The lower plate is P-type silicon from which
electrons are repelled by the negative (-) battery terminal toward the oxide,
and attracted by the positive (+) top plate.
• This excess of electrons near the oxide creates an inverted (excess of
electrons) channel under the oxide. This channel is also accompanied by a
depletion region isolating the channel from the bulk silicon substrate.

N-channel MOS capacitor: (a) no charge, (b) charged. 83

 MOSFET Architecture
• Consider a MOS capacitor between a pair of N-type diffusions
in a P-type substrate. With no charge on the capacitor and no
bias on the gate, the N-type diffusions (the source and drain)
remain electrically isolated.
• A positive bias charges the capacitor.
• The P-type substrate below the gate takes on a negative
charge.
• An inversion region of electrons forms below the gate oxide,
connecting source and drain.
• One type of charge carrier is responsible for conduction
(unipolar).

84
N-channel MOSFET (enhancement type): (a) 0 V gate bias, (b) positive gate bias.
 MOSFET Review

• MOSFET's are unipoar conduction devices, conduction with

one type of charge carrier, like a JFET, but unlike a BJT.
• A MOSFET is a voltage controlled device like a JFET. A gate
voltage input controls the source to drain current.
• The MOSFET gate draws no continuous current, except
leakage. However, a considerable initial surge of current is
required to charge the gate capacitance.

86
 JFET versus MOSFET
• The MOSFET has the advantage of extremely low gate current because of
the insulating oxide between the gate and channel.
• JFET has higher transconductance than the MOSFET.
• JFET has low noise at low frequency.

87