Scribd
Upload
226 views

RCC Structure Design: FOR Dead Load+Live Load +wind Load

This document outlines the process for designing the structure of a reinforced concrete building to withstand dead loads, live loads, and wind loads. The steps include: 1) defining the geometry and cross-sections, 2) applying loads including self-weight, wall loads, floor loads, and wind loads, 3) defining materials and analysis, and 4) conducting concrete design to code by selecting parameters and reviewing results.

Uploaded by

Utkarsh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
226 views

RCC Structure Design: FOR Dead Load+Live Load +wind Load

This document outlines the process for designing the structure of a reinforced concrete building to withstand dead loads, live loads, and wind loads. The steps include: 1) defining the geometry and cross-sections, 2) applying loads including self-weight, wall loads, floor loads, and wind loads, 3) defining materials and analysis, and 4) conducting concrete design to code by selecting parameters and reviewing results.

Uploaded by

Utkarsh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 53

RCC STRUCTURE

DESIGN
FOR
DEAD LOAD+LIVE LOAD +WIND
LOAD
Create a new
project,name
it,select the types
of model

Add beam or anything


as per requirements
PROCEDURE
GEOMETRY
CROSS-SECTION DEFINITION
LOAD DEFINITION
MATERIAL DEFINITION
ANALYSIS
CONCRETE DESIGN
 PARAMETER,PARAMETER
DEFINITION,COMMAND DEFINITION
GEOMETRY

After creating project view port


• ONE CAN DRAW GEOMETRY SKELTON EITHER
BY –
1. NODE CREATION->ADDING THEM BY BEAM
2. GRID GREATION ->ADDIND POINTS
3. STRUCTURAL WIZARD->FRAME MODEL->BAY
STRUCTURE->L/B/H->TRANSFER MODEL
Creating structure in structural wizard
• EDIT THE TRANSFERRED MODEL AS PER
REQUIREMENTS
• FOR REMOVING USELESS BEAM ,SIMPLY
SELECT THEM AND DELETE(CUT)
• FOR ADDING ADDITIONAL BEAM, FIRSTINSERT
NODE IN REQUIRED BEAM ->ADD THEM BY
BEAM
For inserting any node in beam ,right click the mouse & fing
insert node option
Final structure’s plan view.
• ASSIGN THE CROSS-SECTIONAL PROPERTIES
TO MEMBERS IN STRUCTURE
• ASSIGN THE MATERIAL PROPERTIES
GENERAL-PROPERTY

S
H
A
P
E
D*B

MATERIAL
SELECTION OF
BEAM(HOR.)/COLUMN(VERT.)
STRUCTURE ,AFTER ASSIGNING
GENERAL-SUPPORT

FIXED SUPPORT
STRUCTURE,WITH SUPPORTS
• DL-UDL =10kN/m ON THE ALL
BEAMS(RESEMBLING THE WALL ON THE
BEAMS)
• LL-FLOOR LOAD=5kN/m2(RESEMBING THE
LOAD OF OCCUPANT IN THE FLOOR AND
TRANSFERRED ON THE BEAMS)
• WL-IN X OR Z DIRECTION
GENERAL-LOADING

ADDING LOAD CASE


TOTAL THREE TYPES OF LOAD ARE
THERE IN THIS PROBLEM
SO,ADDING THREE LOAD CASE DETAILS
• NOW ,ADD THE LOAD IN INDIVIDUAL “LOAD
CASE DETAILS” WHICH WE HAVE ALREADY
ADDED.
• IN DL –>SELF WT. +UDL
• IN LL->FLOOR LOAD
• IN WL->WIND LOAD(WILL BE DISCUSS later)
SELF WEIGHT(ADD IN DL)

“-” sign. For downward “y”


direction
DL-UDL(WALL LOAD)
LL-FLOOR LOAD

HT.OF
1ST
FLOOR
& TOP
FLOOR
WL-IF WITHOUT DEFINING LOAD

*NEED TO DEFINE WL CHARACTERSTICS AS PER CODE


WL-LOAD DEFINITION
INTENSITY
AND
HIEGHT OF
STR.
Select the appropriate code
INTENSITY ,CALCULATED AS PER CODE AND
TOPOGRAPHY,TERRAIN,STRUCTURE ETC.
ANALYSIS-CREATE ANALYSIS
COMMAND AND RUN.
NOW DESIGN FOR ABOVE LOADS
RCC-DESIGN
M25
AFTER SELECTION,DEFINING AND COMMANDING
IT IS TO BE ASSIGN PROPERLY
RESULTS FOR A BEAM & A COLUMN
Earthquake analysis
All loads to be applied
Earthquake loading
Data generation
All applied loads
Post processing
Comination of loads
RCC designing
Selection of parameters
Defining parameters
Analysis
Results
Deflection etc

You might also like