Scribd
Upload
104 views15 pages

Street Light That Glows On Detecting Vehicle Movement

This document outlines a project proposal to develop a system for vehicle-activated street lights to save energy. The system will use a PIC microcontroller, sensors, and LED street lights to detect approaching vehicles and switch on lights in front of the vehicle. When the vehicle passes, the lights will switch off or dim to 10% intensity. The proposal includes requirements, block diagrams, budgets, schedules, and applications. The goal is to promote energy efficiency on highways by reducing wasted light when no vehicles are present.

Uploaded by

shoaib ehsan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
104 views15 pages

Street Light That Glows On Detecting Vehicle Movement

This document outlines a project proposal to develop a system for vehicle-activated street lights to save energy. The system will use a PIC microcontroller, sensors, and LED street lights to detect approaching vehicles and switch on lights in front of the vehicle. When the vehicle passes, the lights will switch off or dim to 10% intensity. The proposal includes requirements, block diagrams, budgets, schedules, and applications. The goal is to promote energy efficiency on highways by reducing wasted light when no vehicles are present.

Uploaded by

shoaib ehsan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 15

Name :

M.Shoaib
Submitted To:
Engr Komal Nadeem
 Abstract
 Aim
 Hardware Requirements
 Block Diagram
 Software Requirements
 Working Principle
 Budget
 Schedule
 Application
 Conclusion
 Reference
 To detect vehicle movement on highways,
switch ON only a block of street lights in front
of it and to switch OFF the street lights to save
energy.
 During the night, all the lights on the highway
remain ON for the vehicles, but lots of energy
is wasted when there is no vehicle movement.
 This can be used for lights in parking areas of
industries, hotels, restaurants, etc.
 To promote energy efficiency and the balanced
use of energy resources.
 To upkeep energy variation.
 To encourage energy proficiency and use of
new and renewable energy source in the
transport.
 Pic Microcontroller
 LEDs
 Voltage Regulator
 Resistors
 Capacitors
 Crystal
 Transistors
 Diodes
 Photodiodes
 IR LED
 Proteus(For Circuit Simulation)
 MPlab(For coding)
 This system provides a solution for energy saving.
 This is achieved by sensing an approaching
vehicle then switches ON a block of street lights in
front of the vehicle.
 As the vehicle passes by the street lights switch
OFF automatically. Thus, we save a lot of energy.
 There is another mode of operation where instead
of switching OFF the lights completely, they remain
ON with 10% of the maximum intensity.
Hardware Cost

Pic Microcontroller 500

Voltage Regulator 500

Transistors 200

Photodiodes 300

IR LED 180

Capacitors 290

Resistors 100
Task Start Date Duration End Date
Research
Research 1/1/2019
(Days)
10 10/1/2019
Proposal
Proposal 10/1/2019 2 12/1/2019 Shopping
Shopping 12/1/2019 10 22/1/2019
22/1/2019 10 2/2/2019 Design
Design Simulation
Simulation
Proteus test 2/2/2019 4 6/2/2019
Proteus test
Implementation
6/2/2019 10 16/2/2019 Implementation
Hardware Demo 16/2/2019 5 21/2/2019 Hardware Demo
Assembling 21/2/2019 5 26/2/2019
Hardware Demo
Final test 26/2/2019 10 6/3/2019 Assembling
Improvements 6/3/2019 5 11/3/2019
Final Report 11/3/2019 6 17/3/2019
Final test
Improvements
Final Report

GANNTCHART
 More saving of energy used in the street lights.
 Safe road lighting for smooth vehicular
movement.
 Intelligent intensity control.
 This idea can be implemented on both small
roads and busy highways.
 Street Light That Glows On Detecting vehicle
Movement.
 This project is inexpensive.
 Wireless is a buzz of the communication
industry today. The field of wireless
communication is growing quick.
 The main aim of this project is to save the
power. By using it effectively we can save more
power.
 This can be used in long roadways between
the cities.
 Here we are saving lot of power without any
wastage; by this advanced technology we can
design many more systems.
 noriaki, y. (2013, january 3). Retrieved from
https://www.researchgate.net/publication/26
2352965_Smart_street_light_system_with_ener
gy_saving_function_based_on_the_sensor_net
work
 patel, D. (2012, May 4). Retrieved from
https://www.engineersgarage.com/contributi
on/smart-street-lights-system

You might also like