Scribd
Upload
63 views

CSE4255: Telecommunication: Telephone Network

The document discusses the public switched telephone network (PSTN) and its components. It describes how a phone call is routed through numerous switches at the local, regional, national, and international levels to connect two phones. It also discusses how the network has transitioned to being digital as well as analog to support data transmission. The key components of the PSTN include subscribers (phones), local loops connecting subscribers to exchanges, trunks transmitting between exchanges, and switching offices connecting subscribers and trunks. The document further explains concepts like local access transport areas (LATAs), signaling networks, bandwidth usage, and digital subscriber line (DSL) technologies like ADSL.

Uploaded by

Fif Player
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
63 views

CSE4255: Telecommunication: Telephone Network

The document discusses the public switched telephone network (PSTN) and its components. It describes how a phone call is routed through numerous switches at the local, regional, national, and international levels to connect two phones. It also discusses how the network has transitioned to being digital as well as analog to support data transmission. The key components of the PSTN include subscribers (phones), local loops connecting subscribers to exchanges, trunks transmitting between exchanges, and switching offices connecting subscribers and trunks. The document further explains concepts like local access transport areas (LATAs), signaling networks, bandwidth usage, and digital subscriber line (DSL) technologies like ADSL.

Uploaded by

Fif Player
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 19

CSE4255: Telecommunication

Lecture 2
Telephone Network

1
Public Switched Telephone Network

 The public switched telephone network (PSTN), also known as


Plain Old Telephone System (POTS), was originally an analog
system using analog signals to transmit voice.
 To connect one phone to another, the phone call is routed through
numerous switches operating on a local, regional, national or
international level.
 The connection established between the two phones is called a
circuit.
 During the last decade, the telephone network has undergone many
technical changes. The network is now digital as well as analog.
 The need to communicate digital data, a home computer can access
the Internet through the telephone network using dial-up lines or
dedicated lines.
 It is full duplex and use circuit switch network to transmit human
voice.
2
Components of a Telephone System

Transmission media that handle


communication between office

Twisted-pair cable that connects subscriber telephone to nearest end


office or local central office

9.3
Components of PSTN
The telephone network is made of four major components:
1. Subscribers: Subscribers are the devices attach to the network.
Most subscriber devices to the public telecommunication networks
are telephones.
2. Local loops: Local loop is the link between subscriber and the
network (the end office). All local connection loops uses twisted
pair wire. The local loop, when used for voice, has bandwidth of
4kHz.
3. Trunks: Trunks are transmission media that handle the
communication between offices. A trunk normally handles
hundreds or thousands of connections through multiplexing.
Transmission is usually through optical fibers or satellite links.
4. Switching offices: To avoid having a permanent physical link
between any two subscribers, the telephone company has switches
located in a switching office. A switch connects several local loops
or trunks and allows a connection between different subscribers.4
LATAs
 Local Access Transport Area. A LATA is a geographical area
where a local telephone company may carry both local calls
and toll calls that do not leave the LATA.
 A LATA can be a small or large metropolitan area. A
small area may have one single LATA; a large area may
have several LATAs.
 There are two types of services:
1. Intra-LATA services
2. Inter-LATA services

5
Intra-LATA Services

 The services offered by the common carriers (telephone companies) inside a


LATA are called intra-LATA services.
 The carrier that handles these services is called a local exchange carrier (LEC).
 Communication inside a LATA is handled by end switches and tandem switches.
 A call that can be completed by using only end offices is considered toll-free.
6
 A call that has to go through a tandem office (intra-LATA toll office) is charged.
Inter-LATA Services

 The services between LATAs are handled by interexchange


carriers (IXCs).
 These carriers, some times called long-distance companies,
provide communication services between two customers in
different LATAs.
 The IXCs are long-distance carriers that provide general data
communications services including telephone service.
 A telephone call going through an IXC is normally digitized,
with the carriers using several types of networks to provide
service.

7
Points of Presence (POP)
 A point of presence is a switching office within a LATA.
 Each IXC that wants to provide inter-LATA services in a LATA must have a
POP in that LATA.
 The LECs that provide services inside the LATA must provide connections so
that every subscriber can have access to all POPs.

8
Signalling
 Signaling is the extra electrical information other than the traffic.
 It refers to the exchange of information between call components
required to provide and maintain service.
 There are 2 types of signaling:
1. In in-band signaling, the same circuit is used for both signaling
and data.
2. In out-of band signaling, a portion of the bandwidth is used for
signaling and another portion for data.
 The signaling system perform the following tasks such as:
1. Providing dial tone, ring tone, and busy tone
2. Transferring telephone numbers between offices
3. Maintaining and monitoring the call
4. Keeping billing information
5. Maintaining and monitoring the status of the telephone network
equipment 9

6. Providing other functions such as caller ID, voice mail, and so on


Data transfer and signaling Network

 The tasks of data transfer and signaling are separated in modern


telephone networks: data transfer is done by one network,
10 signaling
by another.
Signaling Network
 The signaling network is a packet-switched network involving the
layers similar to those in the OSI model or Internet model.
 The information needed to convey a telephone address can easily
be encapsulated in a packet with all the error control and
addressing information.
 The user telephone or computer is connected to the signal points
(SPs). The link between the telephone set and SP is common for the
two networks.
 The signaling network uses nodes called signal transport ports
(STPs) that receive and forward signaling messages.
 The signaling network also includes a service control point (SCP)
that controls the whole operation of the network.
 Other systems such as a database center may be included to provide
stored information about the entire signaling network.
Telephone Line BW
 Traditional telephone lines can carry frequencies between 300 and
3300 Hz, giving them a bandwidth of 3000 Hz.
 All this range is used for transmitting voice,
 The effective bandwidth of a telephone line being used for data
transmission is 2400 Hz, covering the range from 600 to 3000 Hz.

12
DIAL-UP MODEMS
 Data transfer using the telephone local loop was traditionally
done using a dial-up modem.
 The term modem is a composite word that refers to the two
functional entities that make up the device: a signal modulator
and a signal demodulator.

13
DSL
 Telephone companies developed another technology, digital
subscriber line (DSL), to provide higher-speed access to the
Internet.
 It is one of the most promising for supporting high-speed
digital communication over the existing local loops.
 DSL technology is a set of technologies, each differing in the
first letter
1. ADSL
2. VDSL,
3. HDSL
4. SDSL

14
ADSL

 Asymmetric Digital Subscriber Line


 It provides higher speed (bit rate) in the downstream
direction (from the Internet to the resident) than in the
upstream direction (from the resident to the Internet).
 ADSL is an asymmetric communication technology
designed for residential users; it is not suitable for
businesses.
 It uses the existing local loops and can handle bandwidths
up to 1.1 MHz.
 ADSL is an adaptive technology. The system uses a data
rate based on the condition of the local loop line.

15
Bandwidth division in ADSL

 Transmission: twisted-pair (1 pair)


 Divides 1.104 MHz bandwidth into three bands (256 channels;
4.312 KHz per channel)
 POT (voice) (channel 0)
 Idle. Channels 1 to 5 are not used and provide a gap between voice
and data communication.
 Upstream (channel 6-30; 25 channels), 16

 Downstream (channel 31-255; 225 channels)


Discrete Multitone Technique (DMT) :modulation
technique standard for ADSL which combines QAM and FDM.

1 control channel
24 data transfer

1 control channel
224 data transfer

~ 4 KHz / channel 60 Kbps/ channel 17


ADSL modem: Customer Site

18
ADSL modem: Telephone company Site

19

You might also like