Scribd
Upload
490 views57 pages

Pipesim Design

The document provides instructions for setting up models for ESP selection, gas lift design, and sucker rod pump design in a production engineering software. It includes steps to build simple well models, define fluid properties, specify tubing and completion details, run flow simulations, and select appropriate artificial lift equipment based on design parameters and performance results.

Uploaded by

Putri Diofita W
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
490 views57 pages

Pipesim Design

The document provides instructions for setting up models for ESP selection, gas lift design, and sucker rod pump design in a production engineering software. It includes steps to build simple well models, define fluid properties, specify tubing and completion details, run flow simulations, and select appropriate artificial lift equipment based on design parameters and performance results.

Uploaded by

Putri Diofita W
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 57

ESP Selection Design

Select New Single Branch Model


Build a Simple complation using
the completion icon, tubing icon
and with an outlet node. Select
the Vertical Completion button
and place it the single branch
window.
Double click VertWell_1
 Enter 3625 psia in the Static
Pressure text box
 Enter 288 F in the
Temperature text box
 Select Well PI for Model Type
in the Completion Model field
 Select Liquid PI and enter
12.4 stb/d/psi in the text box
 Click Use nonlinear
correction below bubble point
 Click OK
Define the Black Oil Fluid
Model by Setup > Black
Oil and click
 Select the Black Oil Properties
tab
 In the Fluid Name field, enter
ESP
 In the Stock Tank Properties
field, enter the following
parameters :
 WC : 90%
 GOR : 449 scf/STB
 Gas SG : 0.984
 Water SG : 1.026
 API : 30
 In the Calibrating Data at Bubble
Point field, enter the following
parameters :
 Pressure : 2216 psia
 Temperature : 288 F
 Sat. Gas : 0.54 cP
 In the Solution Gas Correlation
field, select Lasater from the
drop down menu
 Click OK
Double click Tubing_1
 In the Tubing_Tubing_1 window,
in the Preferred Tubing Model
field, select Simple Model from
the drop down menu
 In the Ambient Temperature text
box, enter 68 F.
 In the Tubing section (#1
required, others optional) field,
in the Tubing #1 row and the MD
column text, enter 2863
 In the Tubing #1 row and the ID
column text box, enter 3.958
 In the Tubing #2 row and the MD
column text box, enter 2863
 In the Tubing #2 row and the ID
column text box, enter 8.681
 In the Perforations field, MD text
box, enter 9393 ft from the drop
down menu and enter 288 F in
the Reservoir Temperature text
box.
 Click OK
Select Setup > Flow
Correlation and Click
In the Flow Correlation
window, in the Vertical
Flow (Multhiphase) field,
select Hagedorn & Brown
for Correclation and Click
OK
Select Operation > Nodal
Analysis and Click
 In the Nodal Analysis window, in
the Outlet Pressure text box,
enter 250 psia
 Click Run Model
Result Nodal Analysis

Nodal After ESP


From Result Analysis We Can Select Pump Design
Select Artificial Lift > ESP Design
 Enter the Pump Design Data
parameters :
 Design Production Rate :
1600 sm3/d
 Design Outlet Pressure : 8
barg
 Pump setting depth : 2500 m
 ID : 8.681
 Design Frequency : 60 Hz
 Click Select Pump button
 Select Manufacturer to Reda
 Highlight and select the Reda
HN 13000 pump
 Click OK
Click the Calculate

Calculation Result
of ESP Design
It show by Pump
Performance Plot
and Pump Curv
Pump Performance Plot

Pump Curve
Install Pump
MD Pump Setting Depth,
ESP Data Automatically fill

Select Properties
To show result of ESP Design we must run
Nodal Analysis again
Nodal Before
Gas Lift Design
Select New Single Branch Model
Build a Simple complation using
the completion icon, tubing icon
and with an outlet node. Select
the Vertical Completion button
and place it the single branch
window.
Double click VertWell_1
 Enter 2800 psia in the Static
Pressure text box
 Enter 175 F in the
Temperature text box
 Select Well PI for Model Type
in the Completion Model field
 Select Liquid PI and enter 2.5
stb/d/psi in the text box
 Click Use nonlinear
correction below bubble point
 Click OK
Define the Black Oil Fluid
Model by Setup > Black
Oil and click
 Select the Black Oil Properties
tab
 In the Fluid Name field, enter
Gas Lift
 In the Stock Tank Properties
field, enter the following
parameters :
 WC : 55%
 GOR : 300 scf/STB
 Gas SG : 0.64
 Water SG : 1.05
 API : 32
 Click OK
Double click Tubing_1
 In the Tubing_Tubing_1 window,
in the Preferred Tubing Model
field, select Simple Model from
the drop down menu
 In the Ambient Temperature text
box, enter 102 F.
 In the Tubing section (#1
required, others optional) field,
in the Tubing #1 row and the MD
column text, enter 7500
 In the Tubing #1 row and the ID
column text box, enter 2.441
 In the Tubing #2 row and the MD
column text box, enter 7550
 In the Tubing #2 row and the ID
column text box, enter 6.184
 In the Perforations field, MD text
box, enter 7550 ft from the drop
down menu and enter 175 F in
the Reservoir Temperature text
box.
 Click OK
Select Setup > Flow
Correlation and Click
In the Flow Correlation
window, in the Vertical
Flow (Multhiphase) field,
select Hagedorn & Brown
for Correclation and Click
OK
Select Operation > Nodal
Analysis and Click
 In the Nodal Analysis window, in
the Outlet Pressure text box,
enter 110 psia
 Click Run Model
Result Nodal Analysis
Select Artificial Lift > Gas Lift > Lift Gas
Response
 In the Sensitivity Data field,
for Object select Gas Lift Data
from the drop down menu
 For Variable, select Minimum
injection gas ΔP from the
drop down menu. Use
sensitivity velues of 150 and
250 psi.
 In the Outlet Pressure text
box, enter 1000 psig and
assume an injection gas
surface temperatur 80 F
 In Injection Gas Velues select
mmscf/d from the drop down
menu and enter the following
parameters : 0, 0.1, 0.2, 0.3,
0.5, 0.7, 1, 2, 3, 5
Gas Lift New Mandrel Spacing
Gas Lift Design
Select Artificial Lift > Gas Lift > Lift Gas Design
Design Control
 Design Spacing : New Spacing
 Design Method : IPO-Surface
Close
 Top Valve Location : Assume
Liquid to surface
 Manufacturer : SLB (Camco)
 Type : IPO
 Size : 1 (Tubing size 2 7/8 < 3
½)
 Series : BK-1
 Min Port Diameter : None
 Unloading Temperature :
Default (Unloading)
 Production Pressure Curve :
Production Pressure Model
Design Parameters
 Kickoff Pressure : 1000 psig
 Operating Injection Pressure :
1000 psig
 Unloading Prod. Pressure : 110
psig
 Operating Prod. Pressure : 110
psig
 Target Inj. Gas Rate : 1.25
mmscf/d
 Inj. Gas Surface Temperature
80 F
 Inj. Gas Specific Gravity : 0.64
 Unloading Gardient : 0.465
psi/ft
Safety Factors
 Surface Close Pressure Drop
Between Valve : 15 psi
 Locating DP at Valve Location :
50 psi
 Transfer Factor : 0
 Place Orifice at operating valve
location : Yes
 Discharge Coefficient for Orifice
: 0.865

Select Perform Design


Result Grafik Gas Lift Design
Sucker Rod Pump
Parameters Sucker Rod Pump Design
Parameters Diagnostics Sucker Rod Pump
JA
PRODUCTION ENGINEERING
&
UTILITIES

You might also like