Scribd
Upload
853 views

Topic 7 Storage and Handling System Non Palletized

The document describes various storage and handling systems for products that are not suitable for palletization. It discusses small item storage systems including shelving, bins, drawer units, mobile shelving, flow racks, carousels, lift modules, and miniload systems. It also outlines truck attachments like clamps, load push-pull systems, multi-forks, drum tines, and forklift rotating heads. Finally, it briefly introduces different types of cranes used in warehouses and workshops, such as jib cranes, overhead travelling cranes, and gantry cranes.

Uploaded by

Claude
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
853 views

Topic 7 Storage and Handling System Non Palletized

The document describes various storage and handling systems for products that are not suitable for palletization. It discusses small item storage systems including shelving, bins, drawer units, mobile shelving, flow racks, carousels, lift modules, and miniload systems. It also outlines truck attachments like clamps, load push-pull systems, multi-forks, drum tines, and forklift rotating heads. Finally, it briefly introduces different types of cranes used in warehouses and workshops, such as jib cranes, overhead travelling cranes, and gantry cranes.

Uploaded by

Claude
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 21

STORAGE AND

HANDLING
SYSTEM
(NON-PALLETIZED)
Nuts and Bolts Electronic Items

PRODUCTS NOT
SUITABLE FOR
PALLETIZATION
Paper Reels Machinery

PRODUTS NOT
SUITABLE FOR
PALLETIZATION
Steel Bars Carpets

PRODUTS NOT
SUITABLE FOR
PALLETIZATION
Drums Hanging Garments

PRODUTS NOT
SUITABLE FOR
PALLETIZATION
SMALL ITEM
STORAGE SYSTEMS

Shelving, bins and


drawer units

The most common form of storage for


cases and individual items. These are
modular units that may be bought to many
different specifications. The shelves are
normally arranged in long rows accessible
by aisle, in a similar way to a single deep
pallet racking.
SMALL ITEM
STORAGE SYSTEMS

Mobile Shelving

Same as powered mobile racking , with


only one aisle needed for multiple items of
shelving. The aisle may be created in
different positions by turning a wheel
located at the end of each run of shelving
or the system may be electrically activated,
by means of push button.
SMALL ITEM
STORAGE SYSTEMS

Flow racks (carton live


storage)

Similar in concept with pallet live storage


but product is positioned on inclined rollers
and rolls forward until it reaches the end
stop at the lower end. This type of storage
is suitable for product in cartons or in tote
bins as these have smooth bottoms that
will run along the rollers. It provide a “first-
in first-out storage system.
SMALL ITEM
STORAGE SYSTEMS

Carousels and lift


modules

It may be vertical or horizontal in nature. Vertical


carousels hold products on shelves within a steel-
clad box. These are normally computer controlled,
bringing the appropriate shelf to access point for
the operator by the shortest possible route. In
this way, product is always presented at the ideal
ergonomic height for picking.
SMALL ITEM
STORAGE SYSTEMS

MINILOAD

It is basically an Automated storage retrieval


system for small items. A computer controlled
crane operates along a central aisle and can
access cartons or tote bins from shelving or
racking on either side.
TRUCK ATTACHMENTS

Forklift
Load Multi- Drum rotating
CLAMPS heads
push-pull forks Tines
attachment
TRUCK
ATTACHMENTS

CLAMPS

Various type of clamp attachments are available


for picking up bales, drums and appliances. The
clamps are operated hydraulically and can be set
for different pressures to prevent damage to
goods.
TRUCK
ATTACHMENTS

Load push-pull

Pushing and pulling of loads is a way to reduce or


avoid manual lifting and carrying. Putting the load
on a trolley and pushing it is one way of avoiding
carrying.
TRUCK
ATTACHMENTS

Multi-forks attachment

Multi fork attachments have been designed to enable forklift


trucks to handle extra wide loads safely. The Large span of these
attachments enables loads such as steel bundles, plasterboard,
packs of pipes to be handled without the load sagging and
getting damaged. These attachments can also be used for
handling multiple pallets.
TRUCK
ATTACHMENTS

Drum Tines attachment

These are horizontal bars that are used for lifting a number of
horizontally oriented drums at once.
TRUCK
ATTACHMENTS

Forklift rotating
heads attachment

Used to move goods from the vertical to the horizontal position, for
example, in the case of drums or reels that may be required to be
placed in either orientation.
CRANES

Overhead
Jib Cranes travelling Gantry Cranes
cranes
Cranes

Jib Cranes

Used for moving loads within a


restricted area, such as in the
vicinity of the workstation.
Comprise of an arm that provides
around a central upright.
Cranes

Overhead Travelling
cranes

These are often used in workshops


to move heavy loads anywhere
within a building
Cranes

Gantry cranes

Similar to overhead – travelling


cranes but have uprights and run
on rails fixed to the ground.
Thank you

You might also like