July 2018 doc.: IEEE 802.
11-18/0477r0
Punctured NDP
Date: 2018-07-06
Authors:
Name Affiliations Address Phone email
Ron Porat Broadcom
[email protected] Lochan Verma Qualcomm
Jianhan Liu Mediatek
Hongyuan Zhang Marvell
Submission Slide 1 Ron Porat (Broadcom)
July 2018 doc.: IEEE 802.11-18/0477r0
Discussion
• This contribution provides partial resolution to CID 16723
• Preamble puncture enables transmitter to zero out one or more non-primary 20MHz
channels in an HE MU PPDU [1]
– No pre-HE modulated fields transmitted in punctured channels
– RUs that overlap a punctured 20MHz channel are not allocated
• However, HE sounding procedure [1] does not describe sounding over BW that includes
20MHz channel puncture(s)
• Need to define preamble punctured sounding procedure including
1. NDPA modification to indicate puncture pattern [2]
2. NDP puncture and transmission
3. Beamforming feedback modification and transmission
• This slide-deck describes (2) and (3)
Submission Slide 2 Ron Porat (Broadcom)
July 2018 doc.: IEEE 802.11-18/0477r0
Preamble Punctured HE NDP
• Preamble punctured HE NDP uses HE SU PPDU format
• Puncture of HE NDP based on 242RU boundaries
– Preamble (pre-HE modulated and HE modulated) portion overlapping punctured 242RU is not
transmitted
– Consistent with preamble puncture method [1]
– Preamble puncture applicable to ≥80MHz PPDUs
• Preceding HE NDPA signals location of punctured 242RU
• Center 26RU is punctured if either one of the inner 242RU on tones [-258:-17] or
[17:258] is punctured
80 MHz HE PPDU
242RU: [-500:-259] [-258:-17] Center [17:258] [259:500]
26RU &
DC
Submission Slide 3 Ron Porat (Broadcom)
July 2018 doc.: IEEE 802.11-18/0477r0
Preamble Punctured BF Feedback
• Computation of average SNR excludes all tones that overlap with punctured
242RU
• BF feedback frame not transmitted over 242RUs indicated as punctured in
preceding HE NDPA
– In non-TB Sounding: BF feedback frame transmitted over largest contiguous BW
including primary 20MHz channel and excluding any punctured 242RU
– In TB-Sounding: BF feedback frame transmitted over RU assignment signaled in
Trigger frame
Submission Slide 4 Ron Porat (Broadcom)
July 2018 doc.: IEEE 802.11-18/0477r0
Proposal (1)
• Propose to add the following section ‘28.3.16.1 Punctured NDP’ on page 547
line 53 with the following text:
• The HE NDP PPDU as defined in section 28.3.16 may be punctured over one or more
242 RUs.
• The punctured tones exactly match the location of those 242 RU as defined in Table 28-
8. The preamble portion overlapping those 242RU is punctured as well.
• If an HE NDP PPDU is punctured then the preceding NDPA shall signal the location of
the punctured 242RU
• The center 26RU is punctured if either one of the inner 242RU on tones [-258:-17] or
[17:258] is punctured
• The feedback report field (section 9.4.1.63) for a punctured NDP shall not be
transmitted over 242RUs that were punctured in the preceding HE NDPA
– In non-TB Sounding: BF feedback frame transmitted over largest contiguous BW including
primary 20MHz channel and excluding any punctured 242RU
– In TB-Sounding: BF feedback frame transmitted over RU assignment signaled in Trigger frame
• The calculation of the average SNRs in Table 9-76b shall not include tones that fall
within the punctured 242 RUs
Submission Slide 5 Ron Porat (Broadcom)
July 2018 doc.: IEEE 802.11-18/0477r0
Proposal (2)
• Propose to add to table 28-1 TXVECTOR and RXVECTOR a new parameter
called ‘Punctured Non-HT Modulation’ with the Value field description as
follows:
– 8 bit field indicating the punctured 20MHz subchannels in 80+80/160MHz in order
of increasing frequency.
– Only the 4 MSB are applicable for 80MHz
– The field is not defined for 20MHz or 40MHz transmissions
Submission Slide 6 Ron Porat (Broadcom)
July 2018 doc.: IEEE 802.11-18/0477r0
Proposal (3)
• Propose to add the following section ‘28.3.13.1 Punctured Non-HT duplicate
transmission’ on page 543 line 28 with the following text:
• For 80 MHz and 160 MHz punctured non-HT duplicate transmissions, the Data field
shall be as described in section 21.3.10.12 Non-HT duplicate transmission with the
exception that 20MHz subbands that are punctured in the TXVECTOR field ‘Punctured
Non-HT Modulation’ are omited from the transmission
• In a noncontiguous 80+80 MHz non-HT punctured duplicate transmission, data
transmission in each frequency segment shall be as defined for an 80 MHz punctured
non-HT duplicate transmission.
Submission Slide 7 Ron Porat (Broadcom)
July 2018 doc.: IEEE 802.11-18/0477r0
References
1. 802.11ax D3.0
2. Disallowed subchannels 18/496
Submission Slide 8 Ron Porat (Broadcom)
July 2018 doc.: IEEE 802.11-18/0477r0
Straw poll #1
• Do you support adding the text on slides 5-7?
Submission Slide 9 Ron Porat (Broadcom)
