Scribd
Upload
23 views

Bushing Type For Drilling Jig

This document summarizes the features and specifications of drill bushings used in drilling jigs. Drill bushings are made of brass or oil-free materials and have features like anti-galling coatings, specific hardness levels, chamfered entrances and exits, and knurled surfaces to improve handling. They are precisely sized and stamped for identification and fit flush in jigs to properly guide drills.

Uploaded by

Anonymous 5YMOxVQ
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
23 views

Bushing Type For Drilling Jig

This document summarizes the features and specifications of drill bushings used in drilling jigs. Drill bushings are made of brass or oil-free materials and have features like anti-galling coatings, specific hardness levels, chamfered entrances and exits, and knurled surfaces to improve handling. They are precisely sized and stamped for identification and fit flush in jigs to properly guide drills.

Uploaded by

Anonymous 5YMOxVQ
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 6

Bushing Type for drilling Jig

Brass Bushing

Oil Free Bushing

Oil Free Bushing


Linear Bushing not suitable for Drilling Jig
Drill bushing Feature

1. Anti-galling process creates a


super finish which increases
the life of both the drill and
the bushing

2. Steel: Bushings are


manufactured from either C1144
Stress proof steel or other high
carbon steels known for their long
wear and stability. Special
materials such as tungsten
carbide, 52100 steel, 300 & 400
series stainless steel, plus A2, D2,
D3, M2, and M4 tool steels and
bronze are also available
3. Drill bushings feature a 6. For quick and proper
two-directional undercut identification, all bushings are
and are ground square to clearly stamped with SIZE and
allow the bushings to fit TRADEMARK.
flush on top of the jig.
7. Slip fixed renewable (SF)
4. Drill bushing feature an
bushing heads are knurled which
inside chamfer which
improves operator handling when
improves chip control and
installing and removing bushing
reduces tool wear. from jigs or fixtures.

5. Blended radius at
drill entrance
improves proper drill
entry and alignment 8. Chamfers on the O.D. exit end
which prevents tool of our bushings eliminate penning
wear and breakage. which permits easy entry and
removal.
Hardness: Bushings
are heat treated to
Rockwell C62-64.
Example of drill bushing application in
drilling jig

You might also like