Scribd
Upload
158 views

By Bankim Samaddar NTPC - Faridabad: Supdt (O&m-C&i)

This document provides an overview of Distributed Digital Control, Monitoring, and Information Systems (DDC-MIS) used at NTP Faridabad power plants. It discusses the key components of DDC-MIS including the control system and Man-Machine Interface (MMI). The MMI allows operators to monitor all plant information from a single point. The document describes the specific MMI systems used for gas turbines supplied by Siemens and the combined cycle system supplied by BHEL. It outlines the operating terminals, servers, engineering station, and other features that allow reliable monitoring and control of plant operations.

Uploaded by

satender_kumar86
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
158 views

By Bankim Samaddar NTPC - Faridabad: Supdt (O&m-C&i)

This document provides an overview of Distributed Digital Control, Monitoring, and Information Systems (DDC-MIS) used at NTP Faridabad power plants. It discusses the key components of DDC-MIS including the control system and Man-Machine Interface (MMI). The MMI allows operators to monitor all plant information from a single point. The document describes the specific MMI systems used for gas turbines supplied by Siemens and the combined cycle system supplied by BHEL. It outlines the operating terminals, servers, engineering station, and other features that allow reliable monitoring and control of plant operations.

Uploaded by

satender_kumar86
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 22

Welcome

to
a session on
DDC-MIS
By

bankim samaddar
supdt(o&m-c&I)
ntpc.faridabad
WHAT IS DDCMIS ?
DISTRIBUTED
DIGITAL
CONTROL,
MONITORING &
INFORMATION
SYSTEM
WHY MONITORING?

*HIGH AVAILABILITY OF POWER


*ACCIDENT FREE GENERATION,
TRANSIMISSION & DISTRIBUTION
*HIGH EFFICIENCY OF GENERATION
*LOW COST
*RELIABLE POWER
*ENSURING A VERY HIGH PLANT AVAILABILITY
*IMPROVEMENT IN PLANT EFFICIENCY
WHY DDCMIS ?
1.HIGH FLEXIBILITY IN CONTROL
STRATEGY
2. HIGH SELF-DIAGNOSTIC
3. VERY LOW DRIFT
4. MUCH HIGHER RELIABILITY
5. BETTER DECISION SUPPORT .
6. BETTER OPERATOR INTERFACE
MAJOR COMPONENTS OF DDCMIS
CONTROL SYSTEM

MMI
What is MMI?
M-Man
M-Machine
I-Interface

•All process information at single point.


• System of computers with real time software and
associated special and general hardware
components.
MAN-MACHINE INTERFACE

 STATE-OF-THE-ART WORKSTATIONS AND SERVERS


BASED ON OPEN-ARCHITECTURE AND INDUSTRY
STANDARD H/W AND S/W TO ENSURE BETTER
CONNECTIVITY.
 HARDWARE FROM COMPAQ/DIGITAL, HP OR
OTHER MAJOR SUPPLIERS (LESS DEPENDENCE ON
THE C&I SYSTEM SUPPLIER )
OPERATING SYSTEM WINDOWS NT OR UNIX.
MAN-MACHINE INTERFACE
64/ 32-BIT SERVER/OWS WITH HIGH-SPEED AND
LARGE MEMORY FOR FASTER RESPONSE

PROVISION OF LVS

CONNECTION TO OTHER SYSTEM THROUGH


STATIONWIDE WAN
MMI SYSTEM AT FGPS:

• GAS TURBINE SYSTEM SUPPLIED BY SIEMENS

• COMBINED CYCLE SYSTEM SUPPLIED BY


BHEL
MMI FOR GAS TURBINE
•The system is called TELEPRM XP-OM650.
•It is based on UNIX based machines.
•The system comprises of:
- Operating terminals
- PU/SU
- Engineering Station.
OT OT

P P
TERMINAL BUS
s s
ES
PLANT BUS PU PU
SU SU

p p p p
s s s s
STAR COUPLER

11 13 C
11 13 C
J J
12 14 R 12 14 R
OT AP AP OT

GT 1 GT 2
MMI FOR GAS TURBINE
•The system is called TELEPRM XP-OM650.
•It is based on UNIX based machines.
•The system comprises of:
- Operating terminals
- PU/SU
- Engineering Station.
OPERATING TERMINALS
It is a GUI based interface between operator and
process
-All plant information is available on real time
basis.
-Alarms, logs, History, trends for various plant
parameters are available.
-All plant operations can be done through it.
PU/SU:
This is the main Server Unit.
•Interface between OT and plant bus.
• Provides all data to OT.
• Stores plant data in MOD.
•Two PU/SU ,One is active and other is hot
standby.
ENGINEERING STATION

•All logics, mimics are stored.


•Provision for creating & editing of logics, mimics.
MMI FOR STEAM TURBINE/HRSG
• WSPOSE- Work station based process operator and
Supervisory Environment
•Comprises of-
-SERVERS-1,2.
-Operator Work Stations-1 to 5.
-Interface panel.
BASIC CONFIGRATION FOR ST
SERVERS-1,2 WSPOSE PANEL

IPB-B
IPB-A

HUB

OWS-1 OWS-2 OWS-3 OWS-4 OWS-5 LOCAL LAN


FEATURES OF THE SYSTEM:
-Windows NT based, GUI system.
-Two Alpha servers are provided. At a time
one server is active and other is hot
standby.
-Data acquisition and processing.
-Alarms, trends, logs, history, operator logs
available.
-Performance calculations of plant is done.
-All plant operations can be done through
click of mouse.
Process database is SQL Server(RDBMS).
-Software is in VC++
-Log types available are:
- Alarm Log.
- Post Trip Log
- Trend Log
-Daily Log
ON LINE DATA TO LOCAL LAN
-Software was developed which provides real time data
on local lan.
-At present turbine vibration data, MW, line flow, Bus
voltage etc data are being provided
LARGE VIDEO SCREEN

• Computer screen can be projected on large screens


•There are four BARCO make Large video screens
•Lamp life is 750 Hours
THANK YOU VERY
MUCH

You might also like