Scribd
Upload
1K views

Support Reactions in BEAMS

This document discusses different types of beam supports and loads. It describes roller, simple, hinged/pinned, and fixed supports, and the number of reactions each provides. Internal supports are also mentioned. Common beam types are then outlined, including simple, fixed, continuous, cantilever, propped cantilever, single and double overhanging beams. Finally, the document lists different types of loads that can act on beams.

Uploaded by

Reashma Ps
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
1K views

Support Reactions in BEAMS

This document discusses different types of beam supports and loads. It describes roller, simple, hinged/pinned, and fixed supports, and the number of reactions each provides. Internal supports are also mentioned. Common beam types are then outlined, including simple, fixed, continuous, cantilever, propped cantilever, single and double overhanging beams. Finally, the document lists different types of loads that can act on beams.

Uploaded by

Reashma Ps
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

SUPPORT REACTIONS IN

BEAMS
TYPE OF SUPPORT AND SUPPORT
REACTIONS
Support
1. Act as restrain to the motion of structure
2. Offers reaction (reactive forces) to maintain equilibrium of the structure
3. Transfers the load acting on the structure to the final load bearing members

Types of Support
1. Simple Support/ Knife Edge Support
2. Roller Support
3. Hinge/ Pinned Support
4. Fixed Support
5. Internal Support
1. ROLLER SUPPORT

A roller support is free to move horizontally as


there is nothing constraining it.
Application: The most common use of a roller
support is in a bridge. In civil engineering, a bridge
will typically contain a roller support at one end to
account for vertical displacement and expansion
from changes in temperature. This is required to
prevent the expansion causing damage to a pinned
support.
No. of reactions = 1 (Vertical translation)
2. SIMPLE SUPPORT
A simple support is basically just where the member rests on an external
structure. They are quite similar to roller supports in a sense that they are able
to restrain vertical forces but not horizontal forces.

Simple supports aren't widely used in real life structures unless the engineer
can be sure that the member will not translate; otherwise they run the risk of
the member simply falling off the support.

No. of reactions = 1 (Vertical translation)


3. HINGE/PINNED SUPPORT
member is supported by a pin support would not
be able to move up or down, but would be able to
rotate
a hinge support allows rotation to occur but no
translation (i.e. it resists horizontal and vertical
forces but not a moment).
No. of reactions = 2 (Horizontal, Vertical
translations)

Think of your elbow; you are able to extend and


flex the elbow (rotation) but you cannot move your
forearm left to right (translation).
4. FIXED SUPPORT

Fixed supports are restrained against both rotation


and translation so they can resist any type of force or
moment.
In structural analysis, there are three unknowns to find
for fixed support which can satisfy all the three
equations of equilibrium.
No. of reactions = 3 (Horizontal, Vertical translations
and Moment)
5. INTERNAL SUPPORTS AND
REACTIONS AND APPLICATIONS

Internal supports are provided internally in the structural member


which means an internal support divides the full member into parts.
Following are the types of internal supports provided in a structure:
Internal hinge
Internal roller

Internal Hinge Support in a


Structure

Three Hinged Arch with Internal


Hinge Support
TYPE OF BEAMS

Simple Beam

Fixed Beam Continuous Beam


Cantilever Beam: Beam has one end fixed and other end free.

propped Cantilever
little modification of the cantilever beam, if the free end of the
cantilever beam is place on a roller support/ hinge support
Single Overhanging Beam: Beam freely supported at two points and
having one ends extending beyond the supports.
Double Overhanging Beam: Beam freely supported at two points
and having both ends extending beyond these supports.
TYPES OF LOAD

You might also like