Scribd
Upload
363 views

Tests On Bitumen and Aggregate

This document summarizes tests conducted on aggregates and bitumen used for bituminous works. It outlines key tests on aggregates including cleanliness, polished stone value, stripping value, and water sensitivity. Tests on bitumen include penetration, softening point, ductility, viscosity, and specific gravity. The document provides details on test methods, equipment used, and specification requirements for aggregates and bitumen to ensure quality in bituminous construction projects.

Uploaded by

Gundrathi Narendra Goud
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
363 views

Tests On Bitumen and Aggregate

This document summarizes tests conducted on aggregates and bitumen used for bituminous works. It outlines key tests on aggregates including cleanliness, polished stone value, stripping value, and water sensitivity. Tests on bitumen include penetration, softening point, ductility, viscosity, and specific gravity. The document provides details on test methods, equipment used, and specification requirements for aggregates and bitumen to ensure quality in bituminous construction projects.

Uploaded by

Gundrathi Narendra Goud
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 20

T E S T S O N A G G R E G AT E A N D

BITUMEN
OVERVIEW
Requirements of Aggregates for bituminous works
Tests on aggregate for bituminous works
Cleanliness test,
Polished Stone Value,
Stripping value,
water sensitivity test
Requirements of bitumen
Tests on bitumen
Penetration test,
softening point test,
ductility test,
viscosity test,
sp. gravity test
References
AGGREGATE
Physical Requirements
Property Test Specification
Cleanliness (dust) Grain size analysis Max 5% passing 0.075mm sieve
Flakiness & Elongation Index
Particle shape Max 30%
(Combined)
Los Angeles Abrasion Value Max 35%
Strength
Aggregate Impact Value Max 27%
Polishing Polished stone value Min.55
Soundness:
Sodium Sulphate Max 12%
Durability
Magnesium Sulphate Max 18%
Water Absorption Water absorption Max 2%
Coating and Stripping of Bitumen
Stripping Minimum retained coating 95%
Aggregate Mixtures
Water Sensitivity Retained Tensile Strength Min 80%

3
CLEANLINESS (DUST) BY GRAIN SIZE
ANALYSIS
Max 5% passing 0.075mm sieve
POLISHED STONE VALUE
DURABILITY BY SOUNDNESS TEST

Sodium Sulphate Max 12%


Magnesium Sulphate Max 18%
ASSESSMENT OF STRIPPING

Stripping value determination


(IS-6241 & AASHTO:T-182)

Retained stability(MORTH / ASTM D-1075)

aggregate/bitumen stripping 7
TESTING PROCEDURE OF STRIPPING VALUE
(IS-6241)
Clean & dry aggregate of size P 20mm & R 12.5mm

200 grams of Uniformly heated aggregate @1500c are coated with


5% Bitumen @1600c thoroughly

Transfer and cool at room temperature in a 500ml beaker for


2hours

Fill the beaker with distilled water

Keep the beaker in water bath at 400c for 24hours

Visually observe and estimate % coating and retention of bitumen

aggregate/bitumen stripping 8
STRIPPING VALUE DETERMINATION (IS -6241)

As per MORTH Minimum retained bitumen coating required: 95%

9
WATER SENSITIVIT Y BY RETAINED STABILIT Y TEST
(MORTH/ASTM D -1075)
Prepare 8no.s of Marshall specimens with 5% Bitumen Content

Stability test of 4no.s at 600c after 30 to 40minutes water bath conditioning


(S1)

Stability test of 4no.s at 600c after 24hour water bath conditioning (S2 )

Retained stability Index: ( S2/S1 ) X 100

Required % of Retained stability Minimum 80% (with out anti-stripping


agent)

Required % of Retained stability Minimum 75% (with anti-stripping agent)


aggregate/bitumen stripping 10
REMEDIAL MEASURES

Bitumen/Aggregate source change

Add hydrated lime or lime stone powder

Anti-stripping agent mixing

On site proper drainage facilities

aggregate/bitumen stripping 11
BITUMEN

Paving Bitumen confirming IS: 73-2006


Bitumen grade (pen) 65 or 90 {VG-30/20/10}
Bitumen selection depends on
Temperature
Traffic

12
13
FLASH POINT TEST
(CLEVELAND OPEN CUP)
SOLUBILITY IN TRICHLOROETHYLENE
BITUMEN TESTING-PENETRATION VALUE

16
BITUMEN TESTING-SOFTENING POINT
BITUMEN TESTING-DUCTILITY
BITUMEN TESTING-VISCOSITY
REFERENCES

IS 73-2006
IS 1201, .
IS 2386
Highway Materials and Pavement Testing-by SK Khanna, CEG Justo, A Veeraraghavan
MORTH

You might also like