The Central Mall
QUALITY REPORT ON PERIPHERAL WORKS
LOCATION- ENTRANCE PLAZA ON GROUND FLOOR
MATERIAL SHIFTING AND CLEANING SHOULD BE INITIATED AT FRONT AREAS
SO THAT EARTH FILLING AND LEVELLING CAN BE STARTED.
LOCATION- GRID A-A/1-5, GROUND LEVEL
MATERIAL SHIFTING AND CLEANING SHOULD BE INITIATED AT FRONT AREAS
SO THAT EARTH FILLING AND LEVELLING CAN BE STARTED.
LOCATION- GRID A/1-5, GROUND LEVEL
SLAB IS REQUIRED TO BE CASTED OVER THESE VENTILATION SHAFTS.
LOCATION- GRID A/1-5, LOWER GROUND LEVEL
REINFORCEMENT BARS SHOULD BE CUT DOWN AT LOWER BASEMENT FLOOR
LEVEL
LOCATION- ENTRANCE PLAZA ON GROUND FLOOR
MATERIAL SHIFTING AND CLEANING SHOULD BE INITIATED AT FRONT AREAS
SO THAT EARTH FILLING AND LEVELLING CAN BE STARTED.
LOCATION- SITE ENTRANCE
EXTERNAL CLEANING IS REQUIRED TO BE DONE AND EXTERNAL
DEVELOPMENT AT SITE ENTRANCE CAN BE INITIATED.
LOCATION- STEEL YARD
DUMPED STEEL IS FOUND TO BE RUSTED AND EMBEDED IN EARTH. IT NEEDS
TO BE STACKED TO BACK SIDE DECK AREA TO CLEAN UP THE ENTRANCE
LOCATION- STEEL YARD
ALL SCRAP AND USABLE STEEL SHOULD BE SEGGREGATED AND SHOULD BE
STACKED BEHIND THE CEMENT STORE RATHER THAN AT SITE ENTRANCE.
LOCATION- LAWN SIDE BOUNDARY WALL
NO WORK IS DONE HERE SINCE LAST 30 DAYS. BEAM AND COLUMN CASTING
SHOULD BE DONE HERE ASAP.
LOCATION- FIRE STAIRCASE NEAR FOAM CONCRETE PLANT
ALIGNMENT OF COLUMN IS NOT PROPER.
LOCATION- DRIVE WAY SLAB ON LAWN SIDE
THESE VERTICAL BARS NEEDS TO BE ANCHORED AT TOP OTHERWISE IT IS OF
NO USE.
LOCATION- LAWN SIDE EXTERNAL FAADE GRID 5/B D ON ALL FLOORS
BEAM ALIGNMENT IS NOT PROPER. ON ALL FLOORS.
LOCATION- DRIVE WAY SLAB ON LAWN SIDE
THESE VERTICAL BARS NEEDS TO BE ANCHORED AT TOP. ALSO THE TOP
HORIZONTAL BAR USED IN SHAFTS SHOULD BE ANCHORED TO BEAM.
LOCATION- SHAFT NEAR PASSENGER LIFT.
BLOCK WORK FROM 3 SIDES IN SHAFT IS NOT COMPLETED ON ANY FLOOR.
LOCATION- IIA SIDE BOUNDARY WALL PILE WORK
ALIGNENT AND LOCATION OF BOUNDARY WALL NEED TO BE RECHECKED. IT
SEEMS TO BE MISALIGNED. BORING, STEEL LOWERING AND CONCRETING
SHOULD NOT TAKE MORE THAN 2 DAYS TIME. IT NEEDS TO BE PLANNED
LOCATION- EXTERNAL FAADE NEAR MAIN STAIRCASE
GAPS AND JOINTS OF BLOCK WORK IS NOT PROPER. SINCE SCAFFOLDING IS
THERE, IT CAN BE UTILIZED TO DO THE EXTERNAL JOINT FILLING WORK.
LOCATION- IIA SIDE BOUNDARY WALL PILE WORK
BORING AND STEEL LOWERING SHOULD BE ALLOWED ONLY AFTER FIXING
THE ARRANGEMENT OF CONCRETING IN ADVANCE.
LOCATION- GRID 5/J
RW PIPING SHOULD BE PLACED TOGETHER AT THE CENTER OF THE COLUMN.
AT PRESENT IT WILL CONSUME DOUBLE SPACE THAN THE PROPOSED RW
LOCATION- GRID 5/J-K 4TH FLOOR
BEAM ALIGNMENT IS NOT PROPER.
LOCATION- GRID 5/J-L, PANTALOON ESCALATORS
ESCALATORS ARE NOT PACKED PROPERLY. THEY ARE PRONE TO DUST AND
DAMAGE.
LOCATION- EXTERNAL FAADE NEAR PANTALOON ESCALATORS
GAPS AND JOINTS OF BLOCK WORK IS NOT PROPER. RW PIPING IS PLACED
OUTSIDE THE COULMN WHEREAS IT SHOULD BE PLACED TOGETHER AT THE
MATERIAL SHIFTING
AND
CLEANING
SHOULD
LOCATIONBACK SIDE
MEP
EQUIPMENT
AREA BE INITIATED AT FRONT AREAS
SO
THATOF
EARTH
FILLING
AND LEVELLING
CAN BEYET
STARTED.
SHAFTS
LOWER
BASEMENT
ARE NOT RAISED
THEREFORE EARTH
FILLING IS GETTING DELAYED.
MATERIAL SHIFTING AND CLEANING SHOULD BE INITIATED AT FRONT AREAS
SO THAT EARTH FILLING AND LEVELLING CAN BE STARTED.
LOCATION- PARSVANATH SIDE DRIVE WAY SLAB
DOWEL FOR DRIVE WAY END BEAM IS MISSED AT SITE. REBARRING WILL BE
REQUIRED.
LOCATION- PARSVANATH SIDE DRIVE WAY SLAB
DOWEL FOR DRIVE WAY END BEAM IS MISSED AT SITE. REBARRING WILL BE
REQUIRED.
LOCATION- BACK SIDE FIRE STAIRCASE TOWARDS ELDECO
COLUMN IS NOT ALIGNED PROPERLY, REPAIRING SHALL BE REQUIRED ON
EACH FLOOR.
LOCATION- EXTERNAL FAADE NEAR ELDECO SIDE FIRE STAIRCASE AT THE
BACK
GAPS AND JOINTS OF BLOCK WORK IS NOT PROPER.
LOCATION- ELDECO SIDE BOUNDARY WALL AT THE BACK
ALIGNMENT AND LEVEL OF BOUNDARY WALL NEED TO BE RECHECKED AT
SITE.
LOCATION- EXPANSION JOINT TOWARDS ELDECO SIDE
THERE IS A CRACK DEVELOPMENT FROM BOTTOM TO TOP, DAMAGING THE
BEAMS AND EDGES OF COLUMNS. IT NEED TO BE CHECKED FOR FURTHER
CRACK DEVELOPMENT ON EITHERSIDE OF EXPANSION JOINT.
LOCATION- BOUNDARY WALL TOWARDS ELDECO
EXTRA REINFORCEMENT ABOVE THE REQUIRED HEIGHT OF BOUNDARY
SHOULD BE CUT DOWN AND SURFACE SHOULD BE LEVELLED.
LOCATION- DRIVE WAY SLAB ON ELDECO SIDE
THESE VERTICAL BARS NEEDS TO BE ANCHORED AT TOP.
LOCATION- DRIVE WAY SLAB ON ELDECO SIDE
EXTERNAL CUTOUT FOR STAIRCASE SHOULD BE CLOSED TO START EARTH
FILLING AND LEVELLING WORKS AT FRONT.
LOCATION- OPENING BELOW STAIRCASE AT FRONT
OPENING BELOW THE UPPER GROUND LEVEL NEED TO COVERED FOR EARTH
FILLING AND LEVELLING WORK AT FRONT.
THANK YOU
