Scribd
Upload
355 views

Assembly Line Balancing

Line balancing is the process of assigning tasks to workstations so that workstation time requirements are equal. It aims to minimize the number of workers or workstations needed on a production line by evenly dividing work. The line balancing procedure involves determining tasks, their order, estimating times, calculating cycle time, minimum workstations, and assigning tasks. Heuristics like incremental utilization and longest task time are commonly used to provide good, though not optimal, solutions. Complications can arise from behavioral, transport, machine-dominated, stochastic, and mixed model production factors.

Uploaded by

Harshad_S
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
355 views

Assembly Line Balancing

Line balancing is the process of assigning tasks to workstations so that workstation time requirements are equal. It aims to minimize the number of workers or workstations needed on a production line by evenly dividing work. The line balancing procedure involves determining tasks, their order, estimating times, calculating cycle time, minimum workstations, and assigning tasks. Heuristics like incremental utilization and longest task time are commonly used to provide good, though not optimal, solutions. Complications can arise from behavioral, transport, machine-dominated, stochastic, and mixed model production factors.

Uploaded by

Harshad_S
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 17

LINE BALANCING

BY

HARSHAD
What is Line Balancing?

Line Balancing is the process of assigning tasks to workstations


in such a way that the workstations have approximately equal
time requirements.

OR

Line Balancing is an analysis process that tries to equally divide


the work to be done among workstations so that the number of
worker or workstations requires on a production line is
minimized.
Line Balancing Procedure
1. Determine the tasks involved in completing
1 unit
2. Determine the order in which tasks must be
done
3. Draw a precedence diagram
4. Estimate task times
5. Calculate the cycle time
6. Calculate the minimum number of
workstations
7. Use a heuristic (intuitive) to assign tasks to
workstations
Scheduling High-Volume-
Low-Variety Operations
 The mass consumption patterns of modern
industrialized nations depend on assembly line
technology.
 The classic example is Henry Ford’s auto chassis line.
 Before the “moving assembly line” was introduced in
1913, each chassis was assembled by one worker and
required 12.5 hours.
 Once the new technology was installed, this time was
reduced to 93 minutes.
 Favorable Conditions
 Volume adequate for reasonable equipment utilization.
 Reasonably stable product demand.
 Product standardization
 Part interchange-ability.
 Continuous supply of material
 Not all of the above must be met in every case.
Concepts (1/2)
 Minimum rational work element
 Smallest feasible division of work.
 Flow time = time to complete all stations
 Cycle time
 Maximum time spent at any one workstation.
 Largest workstation time.
 How often a product is completed.
 Inverse of the desired hourly output rate = the
amount of time available at each work station to
complete all assigned work.

1 2 3 Flow time = 4 + 5 + 4 = 13
Cycle time = max (4, 5, 4) = 5
4 min 5 min 4 min
Concepts (2/2)
 Total work content: Sum of the task
times for all the assembly tasks for
the product.
 Precedence diagram: network showing
order of tasks and restrictions on their
performance
 Measure of efficiency
Sumof tasktimes(T)
Efficiency
=
Actualnumber
of workstatio
ns(Na ) x Cycletime(C)
Line Balancing Rules
Line Balancing Heuristics
 Heuristic methods, based on simple
rules, have been developed to provide
good (not optimal) solutions to line
balancing problems
 Heuristic methods include:
 Incremental utilization (IU) method
 Longest-task-time (LTT) method

 … and many others


Incremental Utilization Method:-

 Add tasks to a workstation in order of task


precedence one at a time until utilization is
100% or is observed to fall
 Then the above procedure is repeated at the
next workstation for the remaining tasks
 Pro – Appropriate when one or more task
times is equal to or greater than the cycle
time
 Con – Might create the need for extra
equipment
Longest-Task-Time Method:-

 Adds tasks to a workstation one at a time in


the order of task precedence.
 If two or more tasks tie for order of
precedence, the one with the longest task
time is added
 Conditions for its use:
 No task time can be greater than the cycle time
 There can be no duplicate workstations
The Problem
 Assign tasks to work stations
observing balancing restrictions so as
to minimize balance delay while
keeping station work content for every
station cycle time.
 Restrictions:
 Technological: precedence requirement.
 Position restrictions.
Finding a Solution
 Heuristic procedures generally allow for a
broader problem definition, but do not
guarantee optimal solution.
 Optimizing procedures generally have used
more narrowly defined problems, but
guarantee optimal solution.
 Examples of optimizing procedures
 Dynamic programming
 0-1 Integer programming
 Branch and bound techniques.
 Trend in research has been toward
optimizing procedures due to availability of
large-scale computers.
A Simple Algorithm
 Identify tasks whose predecessors have
been assigned to a workstation (available
tasks).
 Determine from available tasks, those that
fit, i.e., those whose tasks times time
remaining to be filled at this work station.
 Choose a task that fits by some decision rule
 task with largest time
 task with most successors
 task with greatest sum of task times of its
predecessors.
 Continue steps 1 to 3 until no task fits, then
go on to next workstation.
 Continue steps 1 to 4 until all tasks are
assigned.
Illustrative Example 1/3
 You’ve just been assigned the job a
setting up an electric fan assembly
line with the following tasks:
2 1 1
A B G 1.4
H

C D E F
3.25 1.2 .5 1

Task Time(Mins) Description Predecessors


A 2 Assem blefram e N one
B 1 M ount switch A
C 3.25 Assem blem otorhousing N one
D 1.2 M ount motorhousinginfram e A,C
E 0.5 Attachblade D
F 1 Assem bleandattachsafetygrill E
G 1 Attachcord B
H 1.4 Test F, G
Illustrative Example 2/3

Production time per day 420 mins


Max Produc tion = = = 129 units
Bottleneck time 3.25 mins / unit

Production time per period


Required C ycle Time, C =
Required output per period

420 mins / day


C= = 4.2 mins / unit
100 units / day
Illustrative Example 3/3

Theoretical Min. Number of Workstations, N t

Sum of task times (T)


Nt =
Cycle time (C)

11.35 mins / unit


Nt = = 2.702, or 3
4.2 mins / unit
Complications
 Behavioral options
 Job enlargement and rotation.
 Wages related to task.
 Distribution of slack time.
 Inventory buffers.
 Involving work group in decisions.
 Arranging stations to facilitate interaction.
 Personnel selection.
 Time to move an item between stations
 Machine-dominated work stations.
 Task times which exceed the cycle time.
 Stochastic task times.
 Mixed model assembly lines.
THANK YOU

You might also like