Scribd
Upload
47 views

Control Charts

Control charts are a statistical tool used to determine if a process is in or out of control. They were developed in the 1920s by Dr. Walter Shewhart at Bell Telephone Labs. There are two main types: variable control charts, which deal with measurable items, and attribute control charts, which factor in quality attributes. Variable charts include X-bar, R, and MA charts, while attribute charts include P, C, and U charts. Control charts can help improve productivity, make defects visible, and determine what process adjustments are needed by identifying if a process is performing correctly or not.

Uploaded by

Er Vaibhav Nyati
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
47 views

Control Charts

Control charts are a statistical tool used to determine if a process is in or out of control. They were developed in the 1920s by Dr. Walter Shewhart at Bell Telephone Labs. There are two main types: variable control charts, which deal with measurable items, and attribute control charts, which factor in quality attributes. Variable charts include X-bar, R, and MA charts, while attribute charts include P, C, and U charts. Control charts can help improve productivity, make defects visible, and determine what process adjustments are needed by identifying if a process is performing correctly or not.

Uploaded by

Er Vaibhav Nyati
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 36

Control Charts

Training Slides
02/19/01

Control Charts
Definition:
- A statistical tool to
determine if a process is in
control.

History of Control
Charts

Developed in 1920s
By Dr. Walter A. Shewhart
Shewhart worked for Bell
Telephone Labs

Two Types of Control


Charts

Variable Control Charts


Attribute Control Charts

Variable Control Charts


Deal with items that can be
measured .
Examples
1) Weight
2) Height
3) Speed
4) Volume

Types of Variable
Control Charts

X-Bar chart
R chart
MA chart

Variable Control Charts


X chart: deals with a average
value in a process
R chart: takes into count the
range of the values
MA chart: take into count the
moving average of a process

Attribute Control Charts


Control charts that factor in the
quality attributes of a process to
determine if the process is
performing in or out of control.

Types of Attribute
Control Charts

P chart
C Chart
U Chart

Attribute Control Charts


P Chart: a chart of the percent
defective in each sample set.
C chart: a chart of the number
of defects per unit in each
sample set.
U chart: a chart of the average
number of defects in each
sample set.

Reasons for using


Control Charts

Improve productivity
Make defects visible
Determine what process
adjustments need to be made
Determine if process is in or
out of control

Real World Use of


Control Charts
Example from Managing
Quality by Foster.

The Sampson company develops special


equipment for the United States Armed
Forces. They need to use control charts to
insure that they are producing a product that
conforms to the proper specifications.
Sampson needs to produce high tech and top
of the line products, daily so they must have
a process that is capable to reduce the risks
of defects.

How Will Using Control Charts


help your Company?
Possible Goals when using
Control Charts in your Company:
Line reengineering
Increased Employee motivation
Continually improve of your
process
Increased profits
Zero defects

Control Chart Key Terms


Out of Control: the process may
not performing correctly
In Control: the process may be
performing correctly
UCL: upper control limit
LCL: lower control limit
Average value: average

Process is OUT of
control if:
One or multiple points outside
the control limits
Eight points in a row above the
average value
Multiple points in a row near the
control limits

Process is IN control if:


The sample points fall between
the control limits
There are no major trends
forming, i.e.. The points vary,
both above and below the
average value.

Calculating Major Lines


in a Control Chart
Average Value: take the average of
the sample data
UCL: Multiply the Standard deviation
by three. Then add that value to the
Average Value.
LCL: Multiply the Standard deviation
by three. Then subtract that value
from the Average Value.

Examples of Control
Charts

Examples of Control
Charts

Control Charts
The following control chart
shows the improvement of a
process. The standard deviation
decreases as the process
becomes more capable.

Example of Control
Charts

How to Calculate the


standard deviation
P chart:

P= percent or rate
N= number of trails

How to Calculate the


standard deviation
C chart:

X= the average

How to Calculate the


control limits
X-bar Chart:

Lower Control Limit:


Mean 3*sigma
n(1/2)

Center Line:

Process mean

Upper Control Limit:


Mean + 3*sigma
n(1/2)

How to Calculate the


control limits
R chart:

Lower Control Limit:


R-Bar 3*d3*sigma

Center Line:
R-Bar

Upper Control Limit:


R-Bar + 3*d3*sigma

Sample Size
The sample set of data should
be greater than 28.
The data should have been
collected uniformly
The data should contain multiple
capable points of data, or the
information is incorrect.

Example
First Step: Determine what type
of data you are working with.
Second Step: Determine what
type of control chart to use
with your data set.
Third Step: Calculate the
average and the control limits.

Example
The following slides contain
data and questions for your
practice with control charts.
Please take the process step by
step and look back to previous
slides for help.

Problem
You have gathered a sample set of
data for your company. The data is in
the form of percents. Your company
wants your recommendation, is the
process in control.
What type of control chart should
you use? (Variable or Attribute)

Problem
What type of specific control
chart should you use with that
type of sample set? (X-bar, Rchart, MA-chart, P-chart, Rchart, or U-chart)

Problem
Now that you have determined
the control chart to use, you
have to calculate the average
and standard deviation. Use the
data on the following slide.
Take notice to the amount of
sample data. (n>28)

Sample Data
Day
1
2
3
4
5
6
7
8
9
10
11
12
13
14

Percent
.056
.078
.064
.023
.067
.078
.067
.045
.034
.045
.062
.051
.070
.039

15
16
17
18
19
20
21
22
23
24
25
26
27
28

Day

.068
.038
.077
.068
.053
.071
.037
.052
.072
.047
.042
.051
.064
.071

Percent

Example
Now that you have calculated
the three important lines for the
control chart, plot the data and
determine if the process is
capable. (i.e. The data falls
mostly inside the UCL, and the
LCL)

Final Step
Make a recommendation to your
company.
The process is capable
The process is not capable

The following errors were found.


The process needs improvement
The variations are normal in the
system and we must accept them.

Control Charts Review


What have we learned?

Control Charts are a useful way to


determine the capability of a
process.
The different types of control
charts.
How to calculate the control limits
for a control chart.

Works Cited
Control Charts as a tool in SQC. Internet.
http://deming.eng.clemson.edu/pub/tutorials/qctools/ccmain1.htm . 31
January 2001.
Foster, S. Thomas. Managing Quality. Upper Saddle River: Prentice Hall, Inc.
2001.
Generating and Using Control Charts. Internet.
http://www.hanford.gov/safety/upp/spc.htm. 31 January 2001.
Quality and Statistical Process Control. Internet.
http://www.systma.com/tqmtools/ctlchtprinciples.html . 12 February 2001.
Statistical Thinking Tools-Control Charts for the Average. Internet.
http://www.robertluttman.com/yms/Week5/page6.htm. 12 February 2001.

You might also like