Wireless Sensor Networks

CSC 687
Jerry Yoakum

Outline

Overview

Environment Monitoring
Medical application

Data-dissemination schemes

Media access control schemes

Distributed algorithms for collaborative processing

Architecture for a Wireless Sensor Network

Final Remarks

Overview
A Wireless

Sensor Network (WSN) consists

of base stations and a number of wireless
sensors (nodes).

Overview (Cont.)
Wireless Sensor Node: Components

Overview (Cont.)
Characteristics of Wireless Sensor Networks

Requirements: small size, large number, tether-less, and low cost.

Constrained by

Energy, computation, and communication

Small size implies small battery

Low cost & energy implies low power CPU, radio with minimum
bandwidth and range
Ad-hoc deployment implies no maintenance or battery replacement
To increase network lifetime, no raw data is transmitted

Overview (Cont.)
Ad Hoc Wireless Networks
Large number of self-organizing static or mobile
nodes that are possibly randomly deployed
Near(est)-neighbor communication
Wireless connections

Links are fragile, possibly asymmetric

Connectivity depends on power levels and fading
Interference is high for omnidirectional antennas

Sensor Networks and Sensor-Actuator Networks are

a prominent example.

Overview (Cont.)
Distinguishing Features
WSNs are ad hoc networks (wireless nodes that self-organize into
an infrastructureless network).
BUT, in contrast to other ad hoc networks:
Sensing and data processing are essential
WSNs have many more nodes and are more densely deployed
Hardware must be cheap; nodes are more prone to failures
WSNs operate under very strict energy constraints
WSN nodes are typically static
The communication scheme is many-to-one (data collected at a
base station) rather than peer-to-peer

Overview (Cont.)
Lifetime
Nodes are battery-powered
Nobody is going to change the batteries. So, each operation
brings the node closer to death.
"Lifetime is crucial!
To save energy:
Sleep as much as possible.
Acquire data only if indispensable.
Use data fusion and compression.
Transmit and receive only if necessary. Receiving is just as
costly as sending.

Overview (Cont.)
Scalability and Reliability
WSNs should
self-configure and be robust to topology changes (e.g., death of
a node)
maintain connectivity: can the Base Station reach all nodes?
ensure coverage: are we able to observe all phenomena of
interest?
Maintenance
Reprogramming is the only practical kind of maintenance.
It is highly desirable to reprogram wirelessly.

Overview (Cont.)
Data Collection
Centralized data collection puts extra burden on nodes close to
the base station. Clever routing can alleviate that problem
Clustering: data from groups of nodes are fused before being
transmitted, so that fewer transmissions are needed
Often getting measurements from a particular area is more
important than getting data from each node
Security and authenticity should be guaranteed. However, the
CPUs on the sensing nodes cannot handle fancy encryption
schemes.

Overview (Cont.)
Power Supply
AA batteries power the vast majority of existing platforms. They
dominate the node size.
Alkaline batteries offer a high energy density at a cheap price.
The discharge curve is far from flat, though.
Lithium coin cells are more compact and boast a flat discharge
curve.
Rechargeable batteries: Who does the recharging?
Solar cells are an option for some applications.
Fuel cells may be an alternative in the future.
Energy scavenging techniques are a hot research topic
(mechanical, thermodynamical, electromagnetic).

Overview (Cont.)
Radio
Commercially-available chips
Available bands: 433 and 916MHz, 2.4GHz ISM bands
Typical transmit power: 0dBm.
Power control
Sensitivity: as low as -110dBm
Narrowband (FSK) or Spread Spectrum communication. DSSS (e.g., ZigBee) or FH-SS (e.g., Bluetooth)
Relatively low rates (<100 kbps) save power.

Overview (Cont.)
CPU
The Microcontroller Unit (MCU) is the primary choice for
in-node processing.
Power consumption is the key metric in MCU selection.
The MCU should be able to sleep whenever possible,
like the radio.
Memory requirements depend on the application
ATmega128L and MSP430
are popular choices

Overview (Cont.)
Sensors
The power efficiency of the sensors is also
crucial, as well as their duty cycle.
MEMS techniques allow miniaturization.

Overview (Cont.)
Applications of Wireless Sensor Networks

Military and national security application

Environment monitoring (examples coming)

Medical application (example coming)

Nearly anything you can imagine

Environment monitoring (1)

Great Duck Island

150 sensing nodes deployed throughout the island relay data

temperature, pressure, and humidity to a central device.
Data was made available on the Internet through a satellite link.

Environment monitoring (2)

Zebranet: a WSN to study the behavior of zebras

Special GPS-equipped collars were attached to zebras

Data exchanged with peer-to-peer info swaps
Coming across a few zebras gives access to the data

Medical application
Vital sign monitoring
Accident recognition
Monitoring the elderly

Intel

deployed a 130-node network to monitor

the activity of residents in an elder care
facility.
Patient data is acquired with wearable
sensing nodes (the watch)

Data-dissemination Schemes
Conventional Methods

Direct communication with the base station

Sensor nodes communicate with the base station directly.

Energy consuming.

Multi-hop Scheme

Transmit through some other intermediate nodes.

Energy consuming.

Data-dissemination Schemes (Cont.)

Clustering Hierarchy

Data-dissemination Schemes (Cont.)

Low Energy Adaptive Clustering

Hierarchy (LEACH)

Designed for sensor networks where an end-user wants to

remotely monitor the environment. Where the data from the
individual nodes must be sent to a central base station, often
located far from the sensor network.
Desirable properties for protocols on these networks:

Use 100s 1000s of nodes

Maximize system lifetime
Maximize network coverage
Use uniform, battery operated nodes

The use of distributed cluster formation and local processing to

reduce global communication along with randomized rotation of
the cluster-heads allows LEACH to achieve the desired properties
while being energy-efficient.

Media Access Control (MAC) Scheme

Two categories of MAC schemes for wireless networks

Contention-based schemes

Designed for minimum delay and maximum throughput.

Require transceivers to monitor the channel at all times.

Reservation-based or schedule-based schemes

Detect the neighboring radios before allocating collision-free

channel to a link.
TDMA a natural choice for sensor networks.

MAC Scheme (Cont.)

TDMA-based solutions

The self-organizing super frame algorithm

Super frame = TDMA period + BOOTUP period + unused

bandwidth
Performs well only under the specific conditions.

Power Aware Clustered TDMA (PACT)

Divide the TDMA structure into control slot and data slot.
Hard to maintain the cluster when there are mobile nodes.

MAC Scheme (Cont.)

Other solutions
Sensor-MAC

(SMAC)

Nodes periodically sleep.

A node sleeps during transmission period of other
nodes.
Not suitable for time-critical applications.

Architecture for a WSN

Special addressing requirement
Local unique addresses
Data-centric
Example: Each node has an unique number.
Attribute-based naming architecture
Data is named by one or more attributes.
Example: Each node is distinguished by an
attribute GPS sensors are practical for this.

Architecture for a WSN (cont.)

An address-free architecture (AFA)
Advantage

Randomly select probabilistically unique identifier for each

transaction.
Spatial locality.
Temporal locality.

Drawback

Not applicable when static addressing of nodes is needed.

Identifier conflict.

Final Remarks
Can

you think of any applications where a

wireless sensor network would be the best
solution?

Do

you foresee wireless sensor networks

becoming ubiquitous within the next ten
years? During your lifetime?