Scribd
Upload
497 views

Chap 8 Lecture

Examine the performance of engineering devices in light of the second law of thermodynamics. Define exergy, which is the maximum useful work that could be obtained from a system. Define reversible work, which is maximum useful work between two specified states.

Uploaded by

MuhammadAizat
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
497 views

Chap 8 Lecture

Examine the performance of engineering devices in light of the second law of thermodynamics. Define exergy, which is the maximum useful work that could be obtained from a system. Define reversible work, which is maximum useful work between two specified states.

Uploaded by

MuhammadAizat
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 27

Thermodynamics: An Engineering Approach

Seventh Edition in SI Units


Yunus A. Cengel, Michael A. Boles
McGraw-Hill, 2011

Chapter 8
EXERGY: A MEASURE OF WORK
POTENTIAL
Mehmet Kanoglu
University of Gaziantep
Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Objectives
Examine the performance of engineering devices in light
of the second law of thermodynamics.
Define exergy, which is the maximum useful work that
could be obtained from the system at a given state in a
specified environment.
Define reversible work, which is the maximum useful
work that can be obtained as a system undergoes a
process between two specified states.
Define the exergy destruction, which is the wasted work
potential during a process as a result of irreversibilities.
Define the second-law efficiency.
Develop the exergy balance relation.
Apply exergy balance to closed systems and control
volumes.

EXERGY: WORK POTENTIAL OF ENERGY


The useful work potential of a given amount of energy at some
specified state is called exergy, which is also called the availability or
available energy.
A system is said to be in the dead state when it is in thermodynamic
equilibrium with the environment it is in.

A system that is in equilibrium with its


environment is said to be at the dead
state.

At the dead state, the useful


work potential (exergy) of a
system is zero.

A system delivers the maximum possible work as it undergoes a reversible


process from the specified initial state to the state of its environment, that is,
the dead state.
This represents the useful work potential of the system at the specified state
and is called exergy.
Exergy represents the upper limit on the amount of work a device can deliver
without violating any thermodynamic laws.

The immediate surroundings of a hot


potato are simply the temperature
gradient zone of the air next to the
potato.

The atmosphere contains a


tremendous amount of energy, but
no exergy.
4

Exergy (Work Potential) Associated with Kinetic and


Potential Energy
Exergy of kinetic energy:

Exergy of potential energy:

The exergies of
kinetic and
potential energies
are equal to
themselves, and
they are entirely
available for work.

The work
potential or
exergy of
potential energy
is equal to the
potential energy
itself.

Unavailable energy is
the portion of energy
that cannot be
converted to work by
even a reversible heat
engine.

REVERSIBLE WORK AND IRREVERSIBILITY


Reversible work Wrev: The maximum amount of
useful work that can be produced (or the
minimum work that needs to be supplied) as a
system undergoes a process between the
specified initial and final states.
As a closed
system expands,
some work needs
to be done to push
the atmospheric
air out of the way
(Wsurr).
The difference between
reversible work and
actual useful work is the
irreversibility.
For constant-volume
systems, the total
actual and useful
works are identical
(Wu = W).

SECOND-LAW EFFICIENCY, II

Second-law efficiency is a
measure of the performance of a
device relative to its performance
under reversible conditions.

Two heat engines that have


the same thermal efficiency,
but different maximum
thermal efficiencies.
7

General definition of
exergy efficiency

Second-law
efficiency of all
reversible
devices is
100%.

The second-law efficiency


of naturally occurring
processes is zero if none
of the work potential is
recovered.

EXERGY CHANGE OF A SYSTEM


Exergy of a Fixed Mass: Nonflow
(or Closed System) Exergy

Exergy of a closed system

The exergy of a specified mass


at a specified state is the useful
work that can be produced as
the mass undergoes a
reversible process to the state
of the environment.
9

Closed system
exergy per unit
mass
Exergy
change of
a closed
system

When the properties of a system are


not uniform, the exergy of the system is

The exergy of a cold


medium is also a
positive quantity since
work can be produced
by transferring heat to it.
10

Exergy of a Flow Stream: Flow (or Stream) Exergy

Exergy of flow energy

Flow
exergy
Exergy change of flow

The exergy associated


with flow energy is the
useful work that would be
delivered by an imaginary
piston in the flow section.

11

The energy and


exergy contents of
(a) a fixed mass
(b) a fluid stream.

12

EXERGY TRANSFER BY HEAT, WORK,


AND MASS
Exergy by Heat Transfer, Q
Exergy transfer
by heat
When temperature is
not constant
The transfer and
destruction of exergy
during a heat transfer
process through a finite
temperature difference.
The Carnot efficiency c=1T0 /T represents the
fraction of the energy transferred from a heat source at
temperature T that can be converted to work in an
environment at temperature T0.

13

Exergy Transfer by Work, W

Exergy Transfer by Mass, m


There is no useful work
transfer associated with
boundary work when the
pressure of the system is
maintained constant at
atmospheric pressure.
Mass contains energy,
entropy, and exergy, and
thus mass flow into or out of
a system is accompanied by
energy, entropy, and exergy
transfer.

14

THE DECREASE OF EXERGY PRINCIPLE


AND EXERGY DESTRUCTION

The isolated system


considered in the
development of the
decrease of exergy
principle.
The exergy of an isolated system during a process always decreases or, in
the limiting case of a reversible process, remains constant. In other words, it
never increases and exergy is destroyed during an actual process. This is
known as the decrease of exergy principle.

15

Exergy Destruction

Exergy destroyed is a positive quantity for


any actual process and becomes zero for a
reversible process.
Exergy destroyed represents the lost work
potential and is also called the irreversibility
or lost work.
Can the exergy change
of a system during a
process be negative?

The exergy change of a system


can be negative, but the exergy
destruction cannot.

Consider heat transfer from a system to its surroundings. How do you


compare exergy changes of the system and the surroundings?
16

EXERGY BALANCE: CLOSED SYSTEMS


The exergy change of
a system during a
process is equal to the
difference between the
net exergy transfer
through the system
boundary and the
exergy destroyed
within the system
boundaries as a result
of irreversibilities.

Mechanisms
of exergy
transfer.

17

The heat transfer to


a system and work
done by the system
are taken to be
positive quantities.
Qk is the heat transfer through the boundary at temperature Tk at location k.

Exergy
balance for
a closed
system
when heat
transfer is to
the system
and the
work is from
the system.

Exergy
destroyed
outside system
boundaries can
be accounted for
by writing an
exergy balance
on the extended
system that
includes the
system and its
immediate
surroundings.

18

EXAMPLES
Exergy balance for heat conduction

Exergy balance for expansion of steam


The exergy balance applied on the extended
system (system + immediate surroundings)
whose boundary is at the environment
temperature of T0 gives

19

Exergy balance for an air tank


20C

54C

20.6 kJ
1 kJ

= 1 kJ
20C

Wpw,in=U=20.6 kJ
Wrev,in = 1 kJ
19.6 kJ

1 kg
140 kPa
20C

20C

The same effect on the insulated


tank system can be accomplished by
a reversible heat pump that
consumes only 1 kJ of work.
20

EXERGY BALANCE: CONTROL VOLUMES

The rate of exergy change within the


control volume during a process is
equal to the rate of net exergy transfer
through the control volume boundary
by heat, work, and mass flow minus the
rate of exergy destruction within the
boundaries of the control volume.
Exergy is transferred into or out
of a control volume by mass as
well as heat and work transfer.
21

Exergy Balance for Steady-Flow Systems


Most control volumes encountered in practice such as turbines, compressors, nozzles,
diffusers, heat exchangers, pipes, and ducts operate steadily, and thus they experience
no changes in their mass, energy, entropy, and exergy contents as well as their volumes.
Therefore, dVCV/dt = 0 and dXCV/dt = 0 for such systems.

The exergy transfer to a


steady-flow system is
equal to the exergy
transfer from it plus the
exergy destruction
within the system.

22

Reversible Work, Wrev


The exergy balance relations presented above can be used to
determine the reversible work Wrev by setting the exergy destroyed
equal to zero. The work W in that case becomes the reversible work.

The exergy destroyed is zero only for a reversible process, and


reversible work represents the maximum work output for workproducing devices such as turbines and the minimum work input for
work-consuming devices such as compressors.

23

Second-Law Efficiency of Steady-Flow Devices, II


The second-law efficiency of various steady-flow devices can be determined from its
general definition, II = (Exergy recovered)/(Exergy expended). When the changes
in kinetic and potential energies are negligible and the devices are adiabatic:

Turbine

Compressor
Heat
exchanger

Mixing
chamber

A heat exchanger with two unmixed


fluid streams.

24

EXAMPLES
Exergy analysis of a steam turbine

Exergy balance for a charging process

25

26

Summary

Exergy: Work potential of energy


Exergy (work potential) associated with kinetic and potential energy

Reversible work and irreversibility

Second-law efficiency

Exergy change of a system


Exergy of a fixed mass: Nonflow (or closed system) exergy
Exergy of a flow stream: Flow (or stream) exergy

Exergy transfer by heat, work, and mass

The decrease of exergy principle and exergy destruction

Exergy balance: Closed systems

Exergy balance: Control volumes


Exergy balance for steady-flow systems
Reversible work
Second-law efficiency of steady-flow devices
27

You might also like