Scribd
Upload
19 views

Control de Flujo y Error

The document discusses various data link control protocols and error control mechanisms used at the data link layer, including stop-and-wait ARQ, go-back-N ARQ, selective repeat ARQ, HDLC framing, and bit stuffing. Flow control and error control help ensure reliable data transmission over unreliable physical layers.

Uploaded by

Luis Fernando Ramirez
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
19 views

Control de Flujo y Error

The document discusses various data link control protocols and error control mechanisms used at the data link layer, including stop-and-wait ARQ, go-back-N ARQ, selective repeat ARQ, HDLC framing, and bit stuffing. Flow control and error control help ensure reliable data transmission over unreliable physical layers.

Uploaded by

Luis Fernando Ramirez
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 43

Chapter 11

Data Link
Control
and
Protocols
McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.1 Flow and Error Control


Flow Control
Error Control

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

Note:
Flow control refers to a set of
procedures used to restrict the amount
of data that the sender can send before
waiting for acknowledgment.

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

Note:
Error control in the data link layer is
based on automatic repeat request,
which is the retransmission of data.

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.2 Stop-and-Wait ARQ

Operation
Bidirectional Transmission

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.1

McGraw-Hill

Normal operation

The McGraw-Hill Companies, Inc., 2004

11.2

McGraw-Hill

Stop-and-Wait ARQ, lost frame

The McGraw-Hill Companies, Inc., 2004

11.3

McGraw-Hill

Stop-and-Wait ARQ, lost ACK frame

The McGraw-Hill Companies, Inc., 2004

Note:
In Stop-and-Wait ARQ, numbering
frames prevents the retaining of
duplicate frames.

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.4

McGraw-Hill

Stop-and-Wait ARQ, delayed ACK

The McGraw-Hill Companies, Inc., 2004

Note:
Numbered acknowledgments are
needed if an acknowledgment is
delayed and the next frame is lost.

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.5

McGraw-Hill

Piggybacking

The McGraw-Hill Companies, Inc., 2004

11.3 Go-Back-N ARQ


Sequence Number
Sender and Receiver Sliding Window
Control Variables and Timers
Acknowledgment
Resending Frames
Operation
McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.6 Sender sliding window

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.7

McGraw-Hill

Receiver sliding window

The McGraw-Hill Companies, Inc., 2004

11.8

McGraw-Hill

Control variables

The McGraw-Hill Companies, Inc., 2004

11.9

McGraw-Hill

Go-Back-N ARQ, normal operation

The McGraw-Hill Companies, Inc., 2004

11.10

McGraw-Hill

Go-Back-N ARQ, lost frame

The McGraw-Hill Companies, Inc., 2004

11.11 Go-Back-N ARQ: sender window size

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

Note:
In Go-Back-N ARQ, the size of the
sender window must be less than 2m;
the size of the receiver window is
always 1.

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.4 Selective-Repeat ARQ


Sender and Receiver Windows
Operation
Sender Window Size
Bidirectional Transmission
Pipelining

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.12

McGraw-Hill

Selective Repeat ARQ, sender and receiver windows

The McGraw-Hill Companies, Inc., 2004

11.13

McGraw-Hill

Selective Repeat ARQ, lost frame

The McGraw-Hill Companies, Inc., 2004

Note:
In Selective Repeat ARQ, the size of
the sender and receiver window must
be at most one-half of 2m.

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.14

McGraw-Hill

Selective Repeat ARQ, sender window size

The McGraw-Hill Companies, Inc., 2004

Example 1
In a Stop-and-Wait ARQ system, the bandwidth of the line is 1 Mbps, and 1 bit
takes 20 ms to make a round trip. What is the bandwidth-delay product? If the
system data frames are 1000 bits in length, what is the utilization percentage of
the link?

Solution
The bandwidth-delay product is
1 106 20 10-3 = 20,000 bits
The system can send 20,000 bits during the time it takes for the data to go
from the sender to the receiver and then back again. However, the system
sends only 1000 bits. We can say that the link utilization is only
1000/20,000, or 5%. For this reason, for a link with high bandwidth or long
delay, use of Stop-and-Wait ARQ wastes the capacity of the link.
McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

Example 2
What is the utilization percentage of the link in Example 1 if the link uses GoBack-N ARQ with a 15-frame sequence?

Solution
The bandwidth-delay product is still 20,000. The system can send up to 15
frames or 15,000 bits during a round trip. This means the utilization is
15,000/20,000, or 75 percent. Of course, if there are damaged frames, the
utilization percentage is much less because frames have to be resent.

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.5 HDLC
Configurations and Transfer Modes
Frames
Frame Format
Examples
Data Transparency

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.15

McGraw-Hill

NRM

The McGraw-Hill Companies, Inc., 2004

11.16

McGraw-Hill

ABM

The McGraw-Hill Companies, Inc., 2004

11.17

McGraw-Hill

HDLC frame

The McGraw-Hill Companies, Inc., 2004

11.18

McGraw-Hill

HDLC frame types

The McGraw-Hill Companies, Inc., 2004

11.19

McGraw-Hill

I-frame

The McGraw-Hill Companies, Inc., 2004

11.20

McGraw-Hill

S-frame control field in HDLC

The McGraw-Hill Companies, Inc., 2004

11.21

McGraw-Hill

U-frame control field in HDLC

The McGraw-Hill Companies, Inc., 2004

Table 11.1 U-frame control command and response


Command/response

McGraw-Hill

Meaning

SNRM

Set normal response mode

SNRME

Set normal response mode (extended)

SABM

Set asynchronous balanced mode

SABME

Set asynchronous balanced mode (extended)

UP

Unnumbered poll

UI

Unnumbered information

UA

Unnumbered acknowledgment

RD

Request disconnect

DISC

Disconnect

DM

Disconnect mode

RIM

Request information mode

SIM

Set initialization mode

RSET

Reset

XID

Exchange ID

FRMR

Frame reject
The McGraw-Hill Companies, Inc., 2004

Example 3
Figure 11.22 shows an exchange using piggybacking where is no
error. Station A begins the exchange of information with an I-frame
numbered 0 followed by another I-frame numbered 1. Station B
piggybacks its acknowledgment of both frames onto an I-frame of
its own. Station Bs first I-frame is also numbered 0 [N(S) field]
and contains a 2 in its N(R) field, acknowledging the receipt of As
frames 1 and 0 and indicating that it expects frame 2 to arrive next.
Station B transmits its second and third I-frames (numbered 1 and
2) before accepting further frames from station A. Its N(R)
information, therefore, has not changed: B frames 1 and 2 indicate
that station B is still expecting A frame 2 to arrive next.

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.22

McGraw-Hill

Example 3

The McGraw-Hill Companies, Inc., 2004

Example 4
InExample3,supposeframe1sentfromstationBto
stationAhasanerror.StationAinformsstationBto
resendframes1and2(thesystemisusingtheGoBack
Nmechanism).StationAsendsarejectsupervisoryframe
toannouncetheerrorinframe1.Figure11.23showsthe
exchange.

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.23

McGraw-Hill

Example 4

The McGraw-Hill Companies, Inc., 2004

Note:
Bit stuffing is the process of adding
one extra 0 whenever there are five
consecutive 1s in the data so that the
receiver does not mistake the
data for a flag.

McGraw-Hill

The McGraw-Hill Companies, Inc., 2004

11.24

McGraw-Hill

Bit stuffing and removal

The McGraw-Hill Companies, Inc., 2004

11.25

McGraw-Hill

Bit stuffing in HDLC

The McGraw-Hill Companies, Inc., 2004

You might also like