Scribd
Upload
48 views

Comparison With Other Types of Differentials

This document discusses different types of differentials and compares them to Torsen differentials. It states that Torsen differentials improve traction management by automatically distributing more torque to the wheel with more traction, such as the inside wheel in a turn. Unlike other differentials, Torsen differentials resist torque transfer between wheels in proportion to the torque applied, helping ensure neither wheel exceeds available traction. The document also notes that Torsen differentials perform like open differentials under normal driving but provide increased torque to the more tractioned wheel, like the inside wheel, when needed.

Uploaded by

kadu
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
48 views

Comparison With Other Types of Differentials

This document discusses different types of differentials and compares them to Torsen differentials. It states that Torsen differentials improve traction management by automatically distributing more torque to the wheel with more traction, such as the inside wheel in a turn. Unlike other differentials, Torsen differentials resist torque transfer between wheels in proportion to the torque applied, helping ensure neither wheel exceeds available traction. The document also notes that Torsen differentials perform like open differentials under normal driving but provide increased torque to the more tractioned wheel, like the inside wheel, when needed.

Uploaded by

kadu
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 6

COMPARISON WITH OTHER TYPES OF

DIFFERENTIALS
Other means are also known for modifying the operative connection

between drive axles to provide for the transfer of additional torque to the
drive axles collectively.
For example, many limited-slip differentials provide for preloading friction
clutches to oppose the transfer of torque between drive axles.
This frictional pre-load represents a particular minimum magnitude of
resistance which must be overcome to permit any relative rotation
between drive axles which may interfere with the operation of anti-lock
braking systems.
Also, since frictional forces are continually active to resist differentiation,
the friction clutches tend to wear, resulting in a deterioration of intended
differential performance.

In braking situations where little or no torque is being conveyed

by the differential, a four to one apportionment of torque


between drive axles amounts to little or no torque difference
between drive axles.
It has long been appreciated that undesirable wheel slip is
associated with very high rates of differentiation.
Differentials have been designed using fluid shear friction, which
respond to increased rates of differentiation by increasing fluid
shear frictional resistance to differentiation.
The obvious problem with such 'speed sensitive' differentials is
that undesirable wheel slip has already occurred well in advance
of its detection. Also, the fluid shear friction designs generally
rely on the changes in fluid temperature associated with high
differential shear rates to increase resistance to differentiation.

PERFORMANCE OF DIFFERENTIAL UNIT


TORSEN DIFFERENTIAL PERFORMANCE
The Torsen design makes important contributions to vehicle

performance,
especially with respect to the concerns of traction management.
These contributions may be better understood with respect to familiar
vehicle operating conditions which give rise to problems of traction
management.
VEHICLE TRAVEL ON STRAIGHT ROADS
On smooth, dry, straight road surfaces, with no apparent traction
management problem, Torsen differential performance is virtually
undetectable from that of an open differential.
However, on slippery road surfaces where one of the drive wheels does
not have adequate traction to support at least one-half of the applied
engine torque to the differential housing, the Torsen differential delivers
an increased amount of the applied torque to the drive wheel having
better traction.

The amount of additional torque which can be

delivered to the wheel having better traction is


limited only by the bias ratio or the amount of
traction available to that wheel.
At is never possible to deliver more torque to the
drive wheels than the torque which combined
traction of the drive wheels will support.
A Torsen differential designed with an appropriate
bias ratio assures that, for most vehicle operating
conditions, the vehicle can deliver all of the torque
which combined traction of the drive wheels will
support.

VEHICLE TRAVEL THROUGH TURNS

In turning situations, the outside wheels of a vehicle travel over

more distance than the inside wheels. Accordingly, the inside


and outside drive wheels must rotate at slightly different speeds.
A torque division between drive axles at the bias ratio is a
precondition for differentiation under all circumstances of
operation.
In order for one drive wheel to rotate faster than the other, the
drive wheel having greater resistance to rotation slows with
respect to the differential case and transfers torque to the other
wheel contributing to its faster rotation.
The Torsen differential resists transfers of torque between drive
wheels in proportion to the torque applied to the differential
housing, and these results in a larger proportion of the applied
torque being delivered to the slower rotating drive wheel.

Bias ratio should be selected to provide the maximum traction

advantage that will still allow both drive wheels to deliver


significant portions of engine torque in turns.
Even in turning situations, the Torsen differential enhances
traction management.
Since torque is already distributed in increased proportion to
the inside drive wheel, it is exceedingly unlikely that the
outside drive wheel will ever exceed available traction and
'spin up'.
Alternatively, should the torque of the inside wheel exceed
available traction in a turn, it is equally unlikely for this wheel
to 'spin up' since such a 'spin up' would still require a
difference in traction between drive wheels which exceeds the
bias ratio.

You might also like