Cause and

Effect Diagram
CA/PA-RCA : Basic Tool

Sector Enterprise Quality Quality and Mission Assurance

Northrop Grumman Corporation
Integrated Systems

What is Cause and Effect Analysis

Cause and Effect Analysis is a technique for

identifying all the possible causes (inputs)
associated with a particular problem / effect
(output) before narrowing down to the small
number of main, root causes which need to
be addressed.

Why use Cause and Effect Analysis

Cause and Effect Analysis is a valuable tool for:

Focusing on causes not symptoms capturing the

collective knowledge and experience of a group
Providing a picture of why an effect is happening
Establishing a sound basis for further data
gathering and action
Cause and Effect Analysis can also be used to
identify all of the areas that need to be tackled to
generate a positive effect.

What is a Cause and Effect Diagram

A Cause and Effect diagram (also known as a Fishbone or

Ishikawa diagram) graphically illustrates the results of the

analysis and is constructed in steps. Cause and Effect
Analysis is usually carried out by a group who all have
experience and knowledge of the cause to be analyzed.
Cause-and-Effect diagrams graphically display potential
causes of a problem

The layout shows Cause-and-Effect relationships between

the potential causes

Why use a Cause and Effect Diagram

It is common for people working on improvement efforts to jump
to conclusions without studying the causes, target one possible
cause while ignoring others, and take actions aimed at surface
symptoms
Cause-and-effect diagrams are designed to:
Stimulating thinking during a brainstorm of potential causes
Providing a structure to understand the relationships between
many possible causes of a problem

Giving people a framework for planning what data to collect

Serving as a visual display of causes that have been studied
Helping team members communicate within the team and with
the rest of the organization
5

How do I do it?
1. Identify the Problem/Issue

Select a particular problem, issue or effect.

Make sure the problem is specific, tightly defined

and relatively small in scope and that everyone
participating understands exactly what is being
analyzed.

Write the problem definition at the top of the flip

chart or whiteboard.

How do I do it? (continued)

2. Brainstorm
Conduct a Brainstorm of all the possible causes of the effect, i.e., problem.
Have a mixed team from different parts of the process (e.g.,
assemblers and testers).
Get a fresh pair of eyes - from someone who is not too close to the
process.
Have a facilitator - an impartial referee.
Everyone is an equal contributor (leave stripes at the
door).
Fast and furious - go for quantity rather than quality (of ideas) at first.
Involve everyone, or question why he/she is here.
Timing - set an upper limit and best time/day of the week.
Offer an incentive (free lunch?).
Know when to stop.
Recognize that this is a snapshot of how the group thinks today.
Re-visit the problem again.
Refer also to the Process Mapping tool.
Consider (how) should you involve your customer?
7

How do I do it? (continued)

2. Brainstorm (continued)
Write each idea on a Post-It to make it easy to transfer them
onto the fishbone diagram later. Be careful not to muddle
causes and solutions at this stage.
It is important to brainstorm before identifying cause
categories otherwise you can constrain the range of ideas.

However, if ideas are slow in coming use questions such as,

what about?, to prompt thoughts.

How do I do it? (continued)

3. Draw fishbone diagram
Place the effect at the head of the fish
Include the 6 recommended categories shown below
People

Method

Machine

Problem
or Issue

Material

Environment

Measurement System

How do I do it? (continued)

4. Align Outputs with Cause Categories
Review your brainstorm outputs and align with the
recommended major cause categories, e.g., the People,
Method, Machine, Material, Environment and Measurement
System.
Note:
These may not fit every situation and different major categories

might well be appropriate in some instances, however, the total

should not exceed six. Other categories may include
Communications, Policies, Customer/Supplier Issues etc.
Tip !
The 6 categories recommended will address almost all scenarios. However, there is no
one perfect set of categories. You may need to adapt to suit the issue being analyzed.

10

How do I do it? (continued)

5. Allocate Causes
Transfer the potential causes from the brainstorm to the
diagram, placing each cause under the appropriate category.
If causes seem to fit more than one category then it is acceptable
to duplicate them. However, if this happens repeatedly it may be
a clue that the categories are wrong and you should go back to
step 4.
Related causes are plotted as twigs on the branches. Branches
and twigs can be further developed by asking questions such as
what?, why? how?, where? This avoids using broad
statements that may in themselves be effects. Beware, however,
of digging in and getting into bigger issues that are completely
beyond the influence of the team.

11

How do I do it? (continued)

6. Analyze for Root Causes
Consider which are the most likely root causes of the effect. This
can be done in several ways:
Through open discussion among participants, sharing views
and experiences. This can be speeded up by using Consensus
Decision Making.
By looking for repeated causes or number of causes related to a
particular category.
By data gathering using Check Sheets, Process Maps, or
customer surveys to test relative strengths through Pareto
Analysis.
Once a relatively small number of main causes have been
agreed upon, Paired Comparisons, can be used to narrow down
further.
Some groups find it helpful to consider only those causes
they can influence.
12

How do I do it? (continued)

7. Test for Reality
Test the most likely causes by, e.g., data gathering and observation if
this has not already been done.

The diagram can be posted on a wall and added to / modified as

further ideas are generated either by the team or by others who can
review the teams' work.
Cause and Effect Analysis can be combined with Process Mapping.
A fishbone may be developed for each discrete activity within the
process that is generating the output / effect so that causes are
linked to particular steps in the process.

13

Sources of Variation - People

The activities of the workers.
Variations caused by skill, knowledge, competency and
attitude
Types of Questions that may be Asked
Note, this is not a definitive list of questions that may be asked to identify potential source of variation

Does the person have adequate supervision and support?

Does the person know what he is expected to do in his job?
How much experience does the person have?
Does the person have the proper motivation to do his best work?
Is the person satisfied or dissatisfied with his job?
Is the person more- or less-productive at certain times of the day?
Do physical conditions such as light or temperature affect their work?
Does the person have the tools/equipment needed to do the job?
Who does the person contact when problems arise?
Is the work load reasonable?
14

Sources of Variation - Method

The methods used to produce the products.
Variations caused by inappropriate methods or processes.
Types of Questions that may be Asked
Note, this is not a definitive list of questions that may be asked to identify potential source of variation

How is the method used defined?

Is the method regularly reviewed for adequacy?
Is the method used affected by external factors?
Have other methods been considered?
How does the operator know if the method is operating effectively?
Is statistical analysis used to verify the effectiveness of the method?
What adjustments must the operator make during the process?
Have any changes been made recently in the process?

15

Sources of Variation - Machine

The equipment used to produce the products.
Variations caused by temperature, tool wear and vibration.

Types of Questions that may be Asked

Note, this is not a definitive list of questions that may be asked to identify potential source of variation

How old is the equipment or machinery?

Is it maintained regularly?
Is the machine affected by heat or vibration or other physical factors?
How does the operator know if the machine is operating correctly?
Is statistical analysis used to verify the capability of the machine?
What adjustments must the operator make during the process?
Have any changes been made recently in the process?

16

Sources of Variation - Material

The "ingredients" of a process.
Variations caused by materials that differ by industry, product
and stage of production.
Types of Questions that may be Asked
Note, this is not a definitive list of questions that may be asked to identify potential source of variation

How is the material produced?

How is the material verified?
How old is the material?
How is quality judged prior to your operation?
What is the level of quality?
How is the material packaged?
Can temperature, light or humidity affect the material quality?
Who is the material supplier?
Has there been a change in suppliers?
17

Sources of Variation - Environment

The methods used to control the environment.
Variations caused by temperature changes, humidity etc.
Types of Questions that may be Asked
Note, this is not a definitive list of questions that may be asked to identify potential source of variation

How are environmental conditions monitored?

How are environmental conditions controlled?
How is the environment control measuring equipment calibrated?
Are there changes in conditions at different times of the day?
How does environmental change impact the processes being used?
How does environmental change impact the materials being used?

18

Sources of Variation Measurement System

The methods and instruments used to evaluate products.
Variations caused by measuring techniques, or calibration and
maintenance of the instruments.
Types of Questions that may be Asked
Note, this is not a definitive list of questions that may be asked to identify potential source of variation

How frequently are products inspected?

How is the measuring equipment calibrated?
Are all products measured using the same tools or equipment?
How are inspection results recorded?
Do inspectors follow the same procedures? (Is there a set of
standards?)
Do inspectors know how to use the test equipment?

19

Example (showing 4 of the 6 recommended categories)

MANP OWER

MATERIAL

PROCES S K NO WLEDGE

THERMA L E XPA NSION

SHIFT

PA RT DE FORMA TION

TRAINING

MACHINABILITY
OV ERTIME

STRENGTH

INSP ECTION A VAILAB ILITY

FEE D

FORCE

PART DIMENSIONAL
QUALITY
SP EED

INSE RT

NC PROGRAM

GRADE

TYP E
TOOL PA TH

TEMP
CUT DE PTH

PO SITIO NI NG ACCURA CY

HOLDING FIXTURE
REPE ATAB ILI TY
GA UG E

RIGI DI TY
BA CK LA SH

COOLANT
REPE ATAB ILI TY
REPRODUCABI LITY

METHO D

20

MACHINE

Cause and Effect Diagram

Questions?
Call or e-mail:
Bob Ollerton
310-332-1972/310-350-9121
[email protected]

21