Scribd
Upload
592 views

Radio Receivers Problems

This document discusses problems related to an AM radio receiver. It first provides a block diagram of a superheterodyne receiver and describes the frequency components at each block. It then asks questions about the local oscillator frequency range and image frequency for a receiver tuned from 3-10 MHz with an IF of 40.525 MHz. The response calculates the local oscillator frequency range as 43.525-70.525 MHz and the image frequencies as 84.05 MHz and 111.05 MHz. The final question asks to calculate the Q of the RF amplifier and mixer input tuned circuits for an image rejection of 120 in a receiver with a 15 MHz tuned frequency and 450 kHz IF. The response calculates the required Q as 93.55.

Uploaded by

JineshBagadia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
592 views

Radio Receivers Problems

This document discusses problems related to an AM radio receiver. It first provides a block diagram of a superheterodyne receiver and describes the frequency components at each block. It then asks questions about the local oscillator frequency range and image frequency for a receiver tuned from 3-10 MHz with an IF of 40.525 MHz. The response calculates the local oscillator frequency range as 43.525-70.525 MHz and the image frequencies as 84.05 MHz and 111.05 MHz. The final question asks to calculate the Q of the RF amplifier and mixer input tuned circuits for an image rejection of 120 in a receiver with a 15 MHz tuned frequency and 450 kHz IF. The response calculates the required Q as 93.55.

Uploaded by

JineshBagadia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 9

PROBLEMS ON

AM RADIO RECEIVER
PROBLEM ON SUPERHETERODYNE
RECEIVER
Draw the block diagram of
superheterodyne receiver and explain the
operation. Write frequency components
present at the output of each block if audio
frequency is 1 khz and carrier frequency is
540 khz.
RF STAGE MIXER
IF
AMPLIFIER
DETECTOR
AF
P.A.
LOCAL
OSC.
Fs=540khz
IF=470khz
IF=470khz
AF=1khz
loudspeaker
AGC
Receiving
Antenna
Fo=1010khz
Ganged tuning
Q. A receiver is tuned to 3-10 Mhz frequency
range with IF frequency of 40.525 MHz.
1] find the range of L.O. frequency and image
frequency. It is an AM receiver with each
channel occupying 10 KHZ of bandwidth
2]Draw frequency response if IF and AF
amplifiers.
Range of local oscillator frequency:
Fo1=Fs1+IF
=3+40.525
=43.525
Fo2=Fs2+IF
=Fs2+IF
=30+40.525
=70.525
Therefore the range of local oscillator
frequency is from 43.525 Mhz to 70.525
Mhz .
Image Frequecy,
Fsi=Fs+2IF
Fsi=3+(2* 40.525)=84.05 Mhz OR
Fsi=30+(2*40.525)=111.05 Mhz

The frequency response of IF and AF amplifier :
BW=10khz
40.525 Mhz
gain
frequency
0
frequency
gain
5 KHz
Q] A superheterodyne receiver having an RF amplifier and IF of 450 kHz is
tuned to 15 MHz.Calculate the Qs of RF amplifier and mixer input tuned
circuits, both being the same,if the receivers image rejection is to be 120.
SOLN:
Given:IF=450 kHz,fs=15 MHz,
I.R.=120
The overall image rejection is given by,
I.R.=I.R.1*I.R.2
So, I.R.1*I.R.2=120 .(1)
Calculate I.R.1:
I.R.1=sqrt(1+(Q^2*p^2)) .(2)
Where p = (fsi/fs)-(fs/fsi) .(3)
But fsi = fs+2 IF =15*(10^6)+(2*450*(10^3))
=15.9MHz .(4)
p= (15.9/15)-(15/15.9)
=0.1166 ..(5)
Substituting this into equation (2) we get,
I.R.1=sqrt(1+((0.1166^2)*(Q^2)))
=sqrt(1+(0.01359*(Q^2))) (6)
Calculate I.R.2:
Similarly,
I.R.2=sqrt(1+((Q^2)*(p^2)))
=sqrt(1+(0.01359*(Q^2))) (7)
Calculate Q:
Substituting equations (6) and (7) into equation (1)we get,
(sqrt(1+(0.01359*(Q^2))))*(sqrt(1+(0.01359*(Q^2)))) = 120
So, 1+(0.01359 * (Q^2)) = 120]
So, Q = 93.55
Thus the Q of RF amplifier as well as mixer is 93.55.
.Ans.
RF AMPLIFIER MIXER
I.R.=I.R.1+I.R.2
I.R.1,Q I.R.2,Q

You might also like