Scribd
Upload
433 views22 pages

Introduction To Offshore Structures-PART-3

The document discusses different types of loads that should be considered in structural design. It identifies five main categories of loads: 1) permanent loads from structural weight and hydrostatic forces; 2) operating loads from movable equipment and operations; 3) fabrication and installation loads during construction; 4) environmental loads from weather and sea conditions; and 5) accidental loads from unexpected events. Each load category is then further described in one or two paragraphs.

Uploaded by

RUDHRA DHANASEKAR
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
433 views22 pages

Introduction To Offshore Structures-PART-3

The document discusses different types of loads that should be considered in structural design. It identifies five main categories of loads: 1) permanent loads from structural weight and hydrostatic forces; 2) operating loads from movable equipment and operations; 3) fabrication and installation loads during construction; 4) environmental loads from weather and sea conditions; and 5) accidental loads from unexpected events. Each load category is then further described in one or two paragraphs.

Uploaded by

RUDHRA DHANASEKAR
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 22

Types of loads

API-RP2A or BS6235

Categories of loads
Permanent (dead) loads Operating (live) loads

Fabrication and installation loads


Environmental loads Accidental loads

Types of loads

PERMANENT (DEAD) LOADS


Weight of the structure in air, including the weight of grout and ballast, if necessary. Weights of equipment, attachments or associated structures which are permanently mounted on the platform. Hydrostatic forces on the various members below the waterline. These forces include buoyancy and hydrostatic pressures.

Types of loads

OPERATING (LIVE) LOADS


Operating loads arise from the operations on the platform and include the weight of all non-permanent equipment or material, as well as forces generated during operation of equipment. More specifically, operating loads include the following:

The weight of all non-permanent equipment (e.g. drilling, production), facilities (e.g. living quarters, furniture, life support systems, heliport, etc), consumable supplies, liquids, etc. Forces generated during operations, e.g. drilling, vessel mooring, helicopter landing, crane operations, etc.

Types of loads

FABRICATION AND INSTALLATION LOADS


These loads are temporary and arise during fabrication and installation of the platform or its components.

During fabrication, erection lifts of various structural components generate lifting forces, while in the installation phase forces are generated during platform loadout, transportation to the site, launching and upending, as well as during lifts related to installation.

Types of loads

FABRICATION AND INSTALLATION LOADS

Types of loads

ENVIRONMENTAL LOADS

Environmental loads are those caused by environmental phenomena such as wind, waves, current, tides, earthquakes, temperature, ice, sea bed movement, and marine growth. Their characteristic parameters, defining design load values, are determined in special studies on the basis of available data.

Types of loads

ACCIDENTAL LOADS
Accidental loads are loads, ill-defined with respect to intensity and frequency, which may occur as a result of accident or exceptional circumstances. Examples of accidental loads are loads due to collision with vessels, fire or explosion, dropped objects, and unintended flooding of bouyancy tanks. Special measures are normally taken to reduce the risk from accidental loads. For example, protection of wellheads or other critical equipment from a dropped object can be provided by specially designed, impact resistant covers.

Types of weld joints

Types of weld joints

Types of weld joints

Failure Modes

Elastic collapse

Plastic collapse

Fracture

Surface damage

Excessive Stretch Twist Bending Buckling Vibration

Excessive Plastic deformation at room temp. Creep at high temperature

Stiffness

Yield Strength / Creep strength

Cleavage or Brittle Fracture Fatigue Fracture Stress rupture Stress Corrosion Cracking (SCC) Hydrogen damage Impact Fracture Neutron induced Fracture

General corrosion Pitting corrosion Fretting Wear

Surface coating & Treatment

Ultimate strength Fracture Toughness

Stiffness Design - Bending

Bending Stiffness = E * I

Stiffness Design - Torsion

Torsional Stiffness = G * Ip

Types of Fracture

Types of Fracture

Types of Fracture

Types of Fracture

Types of Fracture

Types of Fracture

Types of Fracture

Types of Fracture

Types of Fracture

You might also like