208 Report Analysis: Company Confidential
208 Report Analysis: Company Confidential
Company Confidential
1 2005 Nokia V1-Filename.ppt / yyyy-mm-dd / Initials
Case1: Jumper from TRX 4 to combiner loose (check connectors at both ends)
Case3: Check common feederline from Top of cabinet to Antenna port ( loose
connectors at either end or High VSWR problem, TRX 2&4 in this case use the same feeder)
In this case, the Path imbalance (DL-UL) varies between +1.6 to -4dB which doesnt tell much BUT DL pathloss variations between TRXs is from 112.8 to 136dB & UL pathloss variations between TRXs is from 111.2 to 140dB
Company Confidential
2 2005 Nokia V1-Filename.ppt / yyyy-mm-dd / Initials
DEFINITELY A PROBLEM!
Path Balance Reports help understand any imbalance between UL and DL Whereas Eg.Pathloss comparisons between TRXs of same sector can help identify loose cables or hardware faults, taking other TRXs as reference case
Eg. In Sector A:TRX 3 &4 have only 20% of DL SS samples <100dBm whereas TRX 5 & 6 have 70% of their DL SS samples <-100dBm. Prob:1 Combiner Faulty
Sector B
120.00 100.00 80.00 TRX3 60.00 40.00 20.00 0.00 >70dBm 70-80dBm 80-90 90-100dBm <100dBm Uplink Signal Stre ngth TRX4 TRX5
In Sector B TRX 5 clearly had a difference in signal strength only in Uplink. Prob: Rx cable found to be loose
The same faults can also be seen using Rxlevel statistics from OSS shown in this slide, but 208 is faster for analysis!
Company Confidential
3 2005 Nokia V1-Filename.ppt / yyyy-mm-dd / Initials
Company Confidential
4 2005 Nokia V1-Filename.ppt / yyyy-mm-dd / Initials
Alarms need to be checked at the time of integration 1. 7745-Channel failure rate above defined threshold 2. 7743- Mean holding time below defined threshold 3. 7607,7604- Trx operation degraded, BTS operation degraded-RSSI detected RX signal difference exceeding threshold 4. Min threshold value for VSWR setting at the time of commissioning should be 1.5 and it should be checked for entire band ( for UL and DL both) 5. 7738- BTS with no transaction. 6. 7616-DAC value shifting or clock unit may be faulty,oven oscillator adjustment function interrupted 7601- Difference b/w PCM and base station frequency reference. 7. At the time BTS commissioning check the RSSI value Trx antenna port-1 and antenna port-2, value must be within the range of -90 to -97max. 8. 7607,7604- 2nd branch LNA in dual variable gain duplex unit is faulty. Or no connection to dual variable gain duplex unit means duplexer faulty or problem in connection.
Company Confidential
5 2005 Nokia V1-Filename.ppt / yyyy-mm-dd / Initials
Company Confidential
6 2005 Nokia V1-Filename.ppt / yyyy-mm-dd / Initials