Scribd
Upload
114 views

WMC

Wireless Local Loop (WLL) is a system that connects subscribers to the local telephone station wirelessly using cellular, satellite, or microcellular systems. It provides an alternative to running copper lines by using wireless technology for the "last mile" of connectivity. Key benefits of WLL include lower deployment costs compared to copper, the ability to serve areas where laying cable is impossible or uneconomical, and faster rollout times. WLL systems aim to provide toll-quality voice services within a 5 mile range of a central office at costs equivalent or better than copper alternatives. Interference management and utilizing directional antennas are important design considerations to maximize capacity. WLL is best suited for environments where wired infrastructure is difficult but offers a competitive alternative

Uploaded by

Arpit Gupta
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
114 views

WMC

Wireless Local Loop (WLL) is a system that connects subscribers to the local telephone station wirelessly using cellular, satellite, or microcellular systems. It provides an alternative to running copper lines by using wireless technology for the "last mile" of connectivity. Key benefits of WLL include lower deployment costs compared to copper, the ability to serve areas where laying cable is impossible or uneconomical, and faster rollout times. WLL systems aim to provide toll-quality voice services within a 5 mile range of a central office at costs equivalent or better than copper alternatives. Interference management and utilizing directional antennas are important design considerations to maximize capacity. WLL is best suited for environments where wired infrastructure is difficult but offers a competitive alternative

Uploaded by

Arpit Gupta
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 22

Wireless Local Loop (WLL)

By: Arpit Gupta

Presentation Outline
What is WLL? Why change in the Access Network? Differences with mobile cellular systems

Why WLL?

System Analysis
examples

The future of WLL

Definition

What is WLL? - WLL is a system that connects subscribers to the local telephone station wirelessly. Systems WLL is based on:
Cellular Satellite Microcellular

Other names
Radio In The Loop (RITL) Fixed-Radio Access (FRA).

Change in the Access Network

The cost of laying Cu line was 3 times that of the fiber.

A general WLL setup

WLL services

Desirable:
Wireless feature should be transparent Wire line Custom features

Other:
Business related
Call transfers Conference calling

coin phones V.29 (9600bps) ISDN (64kbps)

WLL should provide


Toll-quality service Expand from a central office to about 5 miles Low license cost Subscriber costs equivalent or better than copper

Cost Considerations

Wireless cost is constant over distance for WLL Wireline depends on distance AND terrain

Situations made for WLL


Environments where it might be cheaper to go wireless Where its impossible to lay copper ( small islands) Business parks, industrial areas Speedy deployment, stop gap application till wire line is introduced

90-120 days for activation

Connection Setup
UWLL WANU PSTN
Trunk Switch function

Transceiver
WLL Controller

WASU

AM HLR

Air Interface

TWLL

Wireless Access Network Unit(WANU) Interface between underlying telephone network and wireless link consists of Base Station Transceivers (BTS) Radio Controller(RPCU) Access Manager(AM) Home Location Register(HLR)

Wireless Access Subscriber Unit(WASU) located at the subscriber translates wireless link into a traditional telephone connection

Important Results of Fixed to Fixed Propagation in WLLs

Pathloss exponent is considerably smaller :


20dB/dec compared to 40dB/dec Decreases cell capacity Allows for larger coverage area

No handoffs necessary: Decreases hardware costs and system complexity Increases quality of service through accurate traffic predictions Allows usage of directional antennas: Can greatly reduce interference and increase cell capacity

In-Cell Interference (CDMA)

I = (Nh 1)aS NhaS


a = voice activity factor Nh = total number of houses S = power received at cell site from every house

Out-of-Cell Interference
Pathloss: 20dB/dec as opposed to 40dB/dec need to take in account more tiers Only from houses whose antennas are directed at the center cell base station

Interference from Another Cell

Blue area is region of interferers


for C It is Not a perfect pie shape.

Per-Tier Interference

Interference is proportional to antenna width w and inversely proportional to the tier number. Decreasing the antenna width can greatly reduce interference. As the number of tiers approaches infinity, so does the total interference. Therefore, system capacity is a function of the total number of tiers in the system.

Capacity comparison
for 5 MHz spectrum allocation
Parameter Chan. BW (kHz) Number of channels Spectral Density( Eb/N0) Freq. Reuse Effective Chan. Per sect. Erlangs per cell Per MHz IS-95 CDMA Mobile 1250 4 7 dB 1 4 38.3 WLL 1250 4 6dB 1 4 48.7 IS-136 TDMA Mobile 30 167 18dB 7 7.95 9.84 WLL 30 167 14dB 4 13.92 19.6 ETSI (GSM) Mobile 200 25 12dB 3 2.78 9.12 WLL 200 25 12dB 3 2.78 9.12

Comparison
WLL Mobile Wireless
Mainly diffuse components Omnidirectional antennas

Wireline

Good LOS component Narrowbeam directed antennas

No diffuse components Expensive wires Reuse Limited by wiring Expensive to build and maintain Low in-premises mobility, wiring of distant areas cumbersome No fading Very reliable

High Channel reuse Less Channel reuse Simple design, constant channel Low in-premises mobility only, easy access Rician fading Weather conditions effects Expensive DSPs, power control High mobility allowed, easy access Rayleigh fading Not very reliable

Examples of services provided

Marconi WipLL (wireless IP local loop)


Based on Frequency hopping CDMA Internet Protocol 64kbps to 2.4Mbps rates Committed Information Rate or best effort service

Lucent WSS (wireless subscriber system)


800 to 5000 subscribers per switch Uses FDMA/FDD 12 Km to 40Km coverage

GoodWin WLL
DECT standards 9.6 kbps rate Specified conditions -5...+55, 20...75% humidity

Future of WLL / Overview

Depends on
economic development existing infrastructure of a region

Offers
market competition quick deployment relatively reliable service at low costs

Questions?

Basie station

Bibliography
Wireless in local loop some fundamentals paper by Ashok Jhunjunwala (IIT Madras) Google images Google search

THANK YOU

You might also like