Scribd
Upload
204 views

Lecture 11 - Forced Convection

This document outlines a course on heat and mass transfer via convection. It introduces key topics that will be covered, including heat conduction, fundamental convection, applications of heat exchangers, extended surfaces, convection and radiation, and mass diffusion. It then discusses different modes of heat transfer, specifically convection, and defines forced and free convection. Several governing equations and dimensionless numbers for convection are also presented, such as the convective heat transfer coefficient, Nusselt number, Prandtl number, and Reynolds number. An example calculation of heat loss from a steam pipe is provided.

Uploaded by

Niaz Muhammad Khan Mehmoti
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
204 views

Lecture 11 - Forced Convection

This document outlines a course on heat and mass transfer via convection. It introduces key topics that will be covered, including heat conduction, fundamental convection, applications of heat exchangers, extended surfaces, convection and radiation, and mass diffusion. It then discusses different modes of heat transfer, specifically convection, and defines forced and free convection. Several governing equations and dimensionless numbers for convection are also presented, such as the convective heat transfer coefficient, Nusselt number, Prandtl number, and Reynolds number. An example calculation of heat loss from a steam pipe is provided.

Uploaded by

Niaz Muhammad Khan Mehmoti
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 35

Convection

Heat & Mass Transfer

Heat & Mass Transfer


Theory & Application

Dr. S. Kamran Afaq


Professor HITEC University

Convection

Heat & Mass Transfer

Course Outline
Introduction
Heat Conduction

Fundamental of Convection Application : Heat Exchangers Heat Transfer from Extended Surfaces (FINS) Convection and Radiation
Mass Diffusion Boiling and Condensation

Convection

Heat & Mass Transfer


Modes of Heat Transfer
Convection : In this mode heat is transfer due to the movement of the fluids Free Convection

Forced Convection

Convection

Heat & Mass Transfer


Heat Convection
Forced Convection
Free Convection

Convection

Heat & Mass Transfer


Cool Air (T = 15 C) By Speed

, , C, v .. Type of fluid (Water)

Roughness, Geometry of the object

Hot Iron Block (T1 = 400 C)

Convection

Heat & Mass Transfer


Heat Convection
Mathematical Modeling :
The rate of heat convection over a medium depends on the:

Nature of the flow (Re.Laminar or Turbulent)


Nature of the fluid (Viscosity, k, density, C, etc) Surface Area of the medium Temperature Difference

Unlike conduction, convection is not concerned with medium properties

Q Q

T As

Convection

Heat & Mass Transfer


Heat Convection
Mathematical Modeling : Convective heat transfer Coefficient (Nature of the fluid)

Q Q

T, A,

Q As T Q hA s T

Newtons law of cooling


where;

T = (Ts -T)

Convection

Heat & Mass Transfer


Heat Convection
Convective heat transfer Coefficient (h)
Rate of Heat transfer b/w solid surface and a fluid per unit surface area per unit temperature difference

Units :

Q As T

h : (W/m2/ C)

Convection

Heat & Mass Transfer


Heat Convection
Nusselt Number

Consider a fluid layer of thickness L, and temperature difference is T = T2 T1. Heat transfer through the fluid will be by convection if the fluid is in motion or by conduction if it is in rest.

Qcond Qconv

T kA L hA T

Convection

Heat & Mass Transfer


Heat Convection
Nusselt Number

Qconv Qcond

hA T T kA L

Qconv Qcond
hL k

hL k

Nu

Nu represent the enhancement of Heat transfer by convection through the fluid as compare to conduction. High value means more effective the convection; Nu=1, means pure conduction

Convection

Heat & Mass Transfer


Heat Convection
Prandtl Number

Velocity Profile

The region above the plate where viscous effect are dominant; known as velocity boundary layer; and boundary layer thickness () is defined as y distance where u=0.99u
Temperature Profile

Similarly the region in temperature profile know as the thermal boundary layer; and boundary layer thickness ( t) is defined as y distance where T Ts = 0.99(T-Ts)

Convection

Heat & Mass Transfer


Heat Convection

Prandtl Number
In flow over a heated surface, both thermal and velocity boundary

layers develop simultaneously; Velocity profile have a strong effect on temperature profile; and finally on thermal boundary layer. Convective heat transfer coefficient is directly dependent on this temperature gradient; The relative thickness of these thermal and velocity boundary layer is describe by Prandtl number;

Convection

Heat & Mass Transfer


Heat Convection
Prandtl Number

Pr

kinamatic viscosity Thermal Diffusivit y

Pr

k Cp
Pr Cp k

Convection

Heat & Mass Transfer


Heat Convection
Prandtl Number

Convection

Heat & Mass Transfer


Heat Convection
Reynolds Number

The transition from laminar to turbulent flow depends upon; Surface Geometry Surface Roughness Surface Temperature Free Stream velocity Type of fluid

Convection

Heat & Mass Transfer


Heat Convection
Reynolds Number

Reynolds describe that the flow regime completely depends on the ratio of the inertia forces to viscous forces in the fluid;

Convection

Heat & Mass Transfer


Heat Convection
Reynolds Number

Re

V2 L 2 V L

Re

V L

Convection

Heat & Mass Transfer


Depends on geometry

Heat Convection
(m , n = 0 to 1)

Nu

hL k

Re

V L

Pr

Cp k

Flow over a isothermal flat plate

Convection

Heat & Mass Transfer


Heat Convection
Average Nu for external forced Convection

Convection

Heat & Mass Transfer


Heat Convection
Internal forced Convection
Hydraulic Diameter (Dh)

Qconv Qcond

hL k

Nu

hL k

Nu

hDh k

Convection

Heat & Mass Transfer


Heat Convection
Internal forced Convection
Laminar and Turbulent in tubes

Re

V L

Re

V Dh

Convection

Heat & Mass Transfer


Heat Convection
Internal forced Convection

Re

V Dh

Ac = Cross-Sectional Area p = Perimeter

Convection

Heat & Mass Transfer


Heat Convection
Internal forced Convection Laminar Flow

Nu

hDh k

Convection

Heat & Mass Transfer


Heat Convection
Internal forced Convection Turbulent Flow

Convection

Heat & Mass Transfer


Heat Convection
Example

Convection

Heat & Mass Transfer


Heat Convection

Tube Side

Convection

Heat & Mass Transfer


Heat Convection

Convection

Heat & Mass Transfer


Heat Convection
Annulus Side

Convection

Heat & Mass Transfer


Heat Convection

Convection

Heat & Mass Transfer


Heat Convection
Example

Properties water at 140 F

0.378 Btu/h.ft. F

5.11 10 6 ft 2 / s Pr 2.98
Properties of air at 80 F

k Pr

0.0150 Btu / h.ft. F 017 10 . 0.72


3

ft 2 / s

Convection

Heat & Mass Transfer


EXAMPLE 75

A long 10-cm-diameter steam pipe whose external surface temperature is 110 C passes through some open area that is not protected against the winds. Determine the rate of heat loss from the pipe per unit of its length when the air is at 1 atm pressure and 10 C and the wind is blowing across the pipe at a velocity of 8 m/s.

Convection

Heat & Mass Transfer


EXAMPLE 75

A long 10-cm-diameter steam pipe whose external surface temperature is 110 C passes through some open area that is not protected against the winds. Determine the rate of heat loss from the pipe per unit of its length when the air is at 1 atm pressure and 10 C and the wind is blowing across the pipe at a velocity of 8 m/s.

Convection

Heat & Mass Transfer

Average Nu for external forced Convection

Convection

Heat & Mass Transfer

Nu

0.027 (4.219 10 4 ) 0.805 (0.7202 )1 3

Nu 127
h k Nu Dh 0.02808 127 0 .1 35 .6 W/m C
2

Then the rate of heat transfer from the pipe per unit of its length;

hAs (Ts T ) 1120 W

Convection

Heat & Mass Transfer

Thank You

You might also like