PowerLight Series

Professional Power Amplifiers

With an unequaled reputation for sound quality and reliability, the PowerLight Series is a range of advanced-technology professional audio amplifiers designed feature for for QSCs touring professionals. PowerLight performance, PowerLights technology reliability exclusive audio

extraordinary

and reduced weight. Four models offer a range of power from 725 to 3,500 watts per channel, allowing you to choose the right power for your special application. With PowerLight technology, PowerLight amplifiers take your sound to a whole new level. Not only does it give you tighter bass and clean transparent highs, PowerLight also cuts waste heat and boosts reliability. PowerLight is a revolutionary switching power supply technology that provides ample current to the audio power circuitry by charging the supply rails 230,000 times a second though an ultra-low impedance circuit. So unlike amplifiers that use conventional supplies, the audio signal is never starved prematurely and remains crisp and clean. PowerLight Series amplifiers also boast a set of useful features. Individually selectable clip limiters lower distortion and protect speakers, and a standby mode allows remote AC control.

Features
owerLight switching technologyfor improved audio performance P igh efficiency, Class H linear output circuit lowers AC current consumption H and cooling requirements by 40% or more (on selected models) DataPort for remote computer control ser defeatable clip limiter reduces distortion, protects speakers U dvanced thermal management system for superior cooling A
2* 1700 2400 1400 2000 3500

PowerLight Power Amplifiers Model PL3.4 PL3.8x Ch 1 PL3.8x Ch 2 PL4.0 PL6.0II 8 725 900 450 900 1150 Watts per channel 4 1150 1400 800 1400 2050

etented gain controls with 2 dB steps for easy resetting D Comprehensive LED status arrays Variable speed fan for quiet operation Remote AC power control DC, subsonic audio, and thermal overload protection eutrik Combo (XLR & 1/4") and barrier balanced input connectors N

20 Hz 20 kHz, 0.1% THD *1 kHz, 1% THD

PowerLight is a registered trademark of QSC Audio Products, Inc.

year warranty plus optional 3 year extended service contract 3

PowerLight Series
PL3.4 Stereo Mode (both channels driven) 8 / FTC 20 Hz - 20 kHz / 0.1% THD 8 / EIA 1 kHz / 0.1% THD 4 / FTC 20 Hz - 20 kHz / 0.1% THD 4 / EIA 1 kHz / 0.1% THD 2 / EIA 1 kHz / 1% THD 8 / FTC 20 Hz - 20 kHz / 0.1% THD 4 / EIA 1 kHz / 1% THD 725 W 750 W 1150 W 1225 W 1700 W 2300 W 3400 W < 0.05% Ch 1 900 W 1400 W 2400 W 1.08 PL3.8x Ch 2 450 W 800 W 1400 W 900 W 1000 W 1400 W 1600 W 2000 W 2800 W 4000 W < 0.05% 0.01% > 500 105 dB 1.06 80x (38 dB) Class H (3-tier) Single fan 30 lbs (13.6 kg) 15.2 A PL4.0 Continuous average output power per channel

Specifications
PL6.0II

1150 W 1300 W 2050 W 2200 W 3500 W 4400 W 7000 W < 0.02% 0.06% > 2000 107 dB 2.40 40x (32 dB) Class H (4-tier) Four fans 53 lbs (24 kg) 16 A

Bridge Mono Mode

Distortion (SMPTE-IM)

< 0.01% 0.01% > 500 1.24 49x (34 dB) Class H (2-tier)

THD (typical) 4 to 8 20 Hz - 20 kHz, 10 dB 0.01% below rated power. 1.0 kHz and below. full rated power Damping Factor (1 kHz and below) Signal to Noise (20 Hz - 20 kHz) Input Sensitivity at 8 Voltage Gain Output Circuitry Cooling (Variable speed fans, rear-to-front air flow) Weight (net) 120 V Current Consumption (1/8 Power Pink Noise at 4) Multiply current by 0.5 for 230 V units Connectors (each channel) Frequency Response Input Impedance Amplifier Protection Controls Load Protection Indicators Power Requirements Power Connectors Dimensions * at 0.2% THD; ** EIA 1.0% THD 1 kHz > 500 108 dB 0.96 80x (38 dB) Class H (3-tier) Single fan 30 lbs (13.6 kg) 11.5 A

105 dB

80x (38 dB) Class H (3-tier)

Single fan 30 lbs (13.6 kg) 15.2 A

Input: Neutrik Combo XLR + 1/4" / TRS input and barrier strip 20 Hz 20 kHz / 0.15 dB PL 6.0II: 2 Hz - 50 kHz / +0, -3 dB PL3.4 and PL4.0: 5 Hz 60 kHz / +0, -3 dB PL3.8: 8 Hz 100 kHz / +0, -3 dB 10k ohm unbalanced / 20k ohm balanced

Output: Touch proof binding posts

Full short circuit, open circuit, thermal, ultrasonic, RF protection. Stable into reactive or mismatched loads Front: AC switch / Ch.1 and Ch.2 gain knobs / Ch.1 and Ch.2 clip limiter switches Rear: Parallel - Stereo - Bridge switch / Remote AC Control terminal strip On/off muting / DC-fault power supply shutdown Prot: Red LED / Standby: Yellow LED / Power-On: Green LED / Clip: Red LED / Signal: Green LED / Level -10 dB: Yellow LED / Level -20 dB: Yellow LED (each channel) 120 / 230 Vac / 50 - 60 Hz 30 A twist lock (PL3.8x, PL4.0, PL6.0II) / 15 A edison (PL3.4) Export versions have removable IEC connectors 19.0" (48.3 cm) rack mounting (all models) / 17.9" (45.5 cm) deep behind front mounting rails (all models) Overall depth on PL 6.0II 19.5" Height: 5.25" (13.3 cm) 3 RU

Specifications subject to change without notice.

1675 MacArthur Boulevard Costa Mesa, CA 92626 Ph: 800/854-4079 or 714/957-7100 Fax: 714/754-6174
PowerLight Spec Sheet 02/08/06

qscaudio.com