Scribd
Upload
288 views

DuoMod 5045 Product Characterization

Tg was determined by the peak in loss modulus from 5degC / min. Ramp rate. No representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications. The SELLER MAKES no WARRANTIES, EXPRESS or IMPLIED, INCLUDING, but not LIMITED TO, MERCHANTABILITY and FITNESS for a particular PURPOSE.

Uploaded by

skinnyy
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
288 views

DuoMod 5045 Product Characterization

Tg was determined by the peak in loss modulus from 5degC / min. Ramp rate. No representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications. The SELLER MAKES no WARRANTIES, EXPRESS or IMPLIED, INCLUDING, but not LIMITED TO, MERCHANTABILITY and FITNESS for a particular PURPOSE.

Uploaded by

skinnyy
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DuoMod DP5045 Product Characterization Date Issued: 7/27/99 Page 1 of 2 FRACTURE TOUGHNESS AND GLASS TRANSITION TEMPERATURE Toughener

Toughener Wt. % 0 2 4 GIC J/m2 469 655 754 GIIC J/m2 717 1188 1262 Tg* C 139 133 131 Hot/Wet Tg** C 123 117 111

A. Control B. DuoMod 5045 C. DuoMod 5045 Notes: * **

Tg was determined by the peak in loss modulus from 5C/min. ramp rate. Conditioned in 71C deionized water for 48 hours.

TEST FORMULATION

Epon 828 Epoxy Resin (*) Epon 836 Epoxy Resin (*) DuoMod DP5045 Triphenyl Phosphine Dicyandiamine Diuron

A 26.0 74.0 0.0 0.22 6.7 3.7 Totals 110.62

B 26.0 74.0 6.9 0.22 6.7 3.7 117.52

C 26.0 74.0 13.8 0.22 6.7 3.7 124.42

Test Formulation Mixing Procedure Add DuoMod DP5045 slowly to the Epon 836 resin while mixing. Add Triphenyl Phosphine and heat at 145C for 30 minutes. Cool to 90C. Blend dicyandiamine and diuron into the Epon 828 epoxy resin, then add to the DuoMod / epoxy resin adduct while mixing. Once all ingredients are thoroughly mixed, immediately cool the mixture to room temperature. If the resin will not be used within 24 hours, store in a freezer. Allow frozen resin to equilibrate to room temperature before use.

Zeon Chemicals L.P., 4111 Bells Lane, Louisville, KY 40211 Phone: 877-ASK ZEON, Fax: 502-775-2055
The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained there from. The information is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Zeon Chemicals L.P. shall not be liable for and the customer assumes all risk and liability of any use or handling of any material beyond the direct control of Zeon Chemicals L.P. The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation, nor as an inducement to practice any patented invention without permission of the patent owner.

DuoMod DP5045 Product Characterization Date Issued: 7/27/99 Page 2 of 2

Prepreg Conditions Doctor Plate Temperature 60C Impregnation Temperature 85C Laminate Cure Temperature 121C Prepreg Resin Content 32%

Carbon Fibers Toray T800HB 12K unidirectional

(*) Epon is a registered trademark of Shell Chemical Co.

You might also like