Scribd
Upload
42 views

Project Overview: PC by The Help of Visual Basic We Monitor The Parameters in The System

This document provides an overview of a project to design a wireless weather monitoring system using ZigBee communication. The system will allow users to monitor parameters like temperature and humidity in real-time without wires. It will use an ARM7 microcontroller and ZigBee module to transmit sensor data and display it on an LCD screen. The objectives are to study ZigBee wireless protocol, develop a reliable wireless monitoring system, and allow communication between a PC and LCD display through microcontroller programming.

Uploaded by

Mohammed Shadab
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
42 views

Project Overview: PC by The Help of Visual Basic We Monitor The Parameters in The System

This document provides an overview of a project to design a wireless weather monitoring system using ZigBee communication. The system will allow users to monitor parameters like temperature and humidity in real-time without wires. It will use an ARM7 microcontroller and ZigBee module to transmit sensor data and display it on an LCD screen. The objectives are to study ZigBee wireless protocol, develop a reliable wireless monitoring system, and allow communication between a PC and LCD display through microcontroller programming.

Uploaded by

Mohammed Shadab
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

CHAPTER 1

Project Overview
In an industry during certain hazards is will be very difficult to monitor the parameter through wires and analog devices such as transducers. To overcome this problem we use wireless device to monitor the parameters so that we can take certain steps even in worst case. Few years back the use of wireless device was very less, but due the rapid development is technology now a days we use maximum of our data transfer through wireless like wi-fi, Bluetooth, wi max,etc. In view of all this things, the design of wireless parameter progress helps in an industry to monitor the parameter in real time with the use of Zigbee, is an easy installation platform, cost effective method for the low bit rate transmission, so with the help of the ready Zigbee platform by using the embedded C language we interface the module with the pc by the help of visual basic we monitor the parameters in the system. The main use of this module helps in an industry during the worst cases as the analog device may be damaged may be during the fire accidents,etc. But with the wireless transmission we have not have an accurate data but when compared to the analog failure the errors are very minimum so we use wireless to monitor the parameter in an industry where their no means of human interface to monitor the parameters In this project we deal to monitor the parameter through wireless by using zigbee ready platform which is based on the IEEE 802.15.4, 2.4 GHz, in this module we use LPC2148 for the voltage and other technical parameters, which has in build RAM in it. The working of this module is simple in principle, the changes in certain place is monitor in real time process which is very accurate in monitoring and their no other interface and other disturbance in monitoring the parameter in this project we monitor temperature and humidity with the help of respective sensors. The change in the room temperature, humidity can be monitored like real time as the change is displayed in respective interval in the visual basic screen. This means of wireless end device is used to monitor the weather parameters in an industry, which helps to monitor and have a clear thing to monitor it. The sensors used in this module to monitor are Temperature sensor and humidity sensors are used. MSP 430 used in the module of contains inbuilt RAM and flash memory and also Zigbee module contains A/D converter, transmitter also.so, this can be widely used for home

automation, industrial application which helps for an easy wireless communication for a low data rate transmission. In this following chapter we discuss with zigbee and its importance and how it is used for the monitoring the parameters.

Hardware and Software requirement


XBee ZigBee module (CC2500). USART (Universal Serial Asynchronous Receiver Transmitter). LCD display. Sensors. DC adopters. ARM7 Microcontroller (LPC2148).

Software requirement
Operating System Windows 2000 / XP Keil Software 4 Embedded C

Objective of the Project


To study a new wireless communication protocol ZigBee. To design a wireless weather monitoring system using ARM7 microcontroller and ZigBee which will enable its user to quickly send a text message to a concern person. To develop a reliable and effective wireless weather monitoring system providing a greater degree of ####### between the users, this can be easily implemented in many application areas like, universities, offices, retail stores hospitals, restaurants, industries, schools etc. To study the connection of ARM7 microcontrollers with the ZigBee modules using the dipole (whip) antenna to design it as transmitter / receiver. Development of programs in embedded C language for microcontrollers to function as transmitter and receiver. Development of programs in C for communication between Personal Computer at transmitter and LCD at the receiver. Synchronization of ARM7 microcontrollers using the USART (Serial Communication Unit) and the clock of the microcontroller. Developments of LCD device driver using the ARM7 microcontroller with using the LCD interface ICs. Design of Parallel port interface for the same using device driver software in C. Development of interrupt driven data transfer using the ARM7 microcontroller, such that there will be no loss of data transmission.

BLOCK DIAGRAM: Transmitter Section:


Power Supply Weather Sensors

ADC ARM7TD MI-S LPC2148 MAX232 Zigbee Module

Crystal Oscillator

RESET

Power Supply

You might also like