100 Technical Keywords with Descriptions from my profile using ChatGPT
Technical Engineering Keywords
Process Engineering – Design and optimization of chemical and physical processes in industrial
systems.
Mechanical Engineering – Application of mechanics and thermodynamics to design and analyze
equipment.
Chemical Engineering – Engineering discipline focusing on chemical production and process
development.
Detailed Design – Final engineering phase where construction-ready deliverables are produced.
FEED (Front-End Engineering Design) – Initial project design stage defining scope, layout, and
cost estimates.
Concept Design – Early-stage development focusing on feasibility and process configuration.
Pre-FEED – Preliminary stage to outline key technical options and select best approach.
Commissioning – Activities to prepare plant for operation including system checks and testing.
Startup – Initial operation phase ensuring safe and efficient performance.
HAZOP – Hazard and Operability Study to identify risks and operational issues.
IPF (Instrumented Protective Functions) – Safety instrument systems ensuring safe shutdown in
abnormal conditions.
P&ID (Piping and Instrumentation Diagram) – Detailed schematics showing piping and control
instrumentation.
PFD (Process Flow Diagram) – Diagram illustrating the major process streams and equipment.
Datasheets – Technical documents outlining specifications of equipment or instruments.
Technical Specifications – Documents defining requirements for materials, components, or
systems.
Equipment Sizing – Calculations to determine capacity and dimensions of equipment.
Heat and Mass Balance – Fundamental engineering calculations for energy and material flow.
Hydraulic Calculations – Estimation of fluid flow, pressure drops, and pump requirements.
Simulation – Use of software to model process behavior and optimize design.
API 682 – Standard for mechanical seals used in centrifugal and rotary pumps.
API 610 – Specification for centrifugal pumps in petroleum and chemical industries.
ASME Section VIII – Design and fabrication rules for pressure vessels.
Pressure Vessels – Containers designed to hold gases or liquids under pressure.
Pumps – Mechanical devices that move fluids by mechanical action.
Compressors – Machines that increase the pressure of gases.
Valves – Devices for controlling fluid flow.
Instrumentation – Sensors and controllers used for process measurement and control.
Piping Design – Layout and specification of piping systems in facilities.
Nozzle Load Calculations – Assessment of stresses on equipment nozzles from pipe loads.
Thermal Design – Engineering to manage heat transfer in equipment and systems.
Water & Wastewater Treatment
SBR (Sequencing Batch Reactor) – Biological treatment process for wastewater in batch mode.
MBBR (Moving Bed Biofilm Reactor) – Uses biofilm carriers in aeration tanks for treatment.
MBR (Membrane Bioreactor) – Combines biological treatment with membrane filtration.
Activated Sludge – Aerobic biological treatment using suspended microbial culture.
Nutrient Removal – Processes to eliminate nitrogen and phosphorus.
Tertiary Treatment – Advanced treatment for polishing effluent.
Reverse Osmosis (RO) – Membrane process to remove salts and impurities from water.
RO/EDI – Combination of Reverse Osmosis and Electrodeionization for ultra-pure water.
Ultrafiltration – Membrane filtration for removing fine particles and pathogens.
Seawater RO – RO process specifically for desalination of seawater.
Drinking Water – Treatment processes to make water safe for human consumption.
Deionization – Removal of ionized salts using ion exchange resins.
Chlorination – Disinfection using chlorine or compounds.
Clarifier – Settling tank used to remove solids from liquids.
Sludge Handling – Treatment and disposal of residual sludge.
Process Optimization – Improving performance, efficiency, and cost-effectiveness.
BioWin – Simulation software for wastewater treatment processes.
GPS-X – Modeling tool for dynamic wastewater treatment simulations.
Wastewater Modeling – Simulation of biological and physical processes in treatment systems.
Energy Optimization – Reducing energy consumption while maintaining performance.
Oil, Gas & Refinery Projects
SAGD (Steam-Assisted Gravity Drainage) – Enhanced oil recovery method for heavy crude.
Gas Sweetening – Removal of acidic gases like H2S and CO2.
Amine Unit – Facility to treat natural gas using amine solvents.
Dew Point Control – Process to remove hydrocarbons from gas streams.
Sour Gas – Natural gas containing hydrogen sulfide.
Produced Water Treatment – Treatment of water co-produced with oil/gas.
Oil-Water Separation – Separation of oil from water using gravity or coalescers.
Fuel Gas Conditioning – Treatment of gas for use as fuel in turbines or heaters.
LPG Recovery – Extraction of propane and butane from natural gas.
Crude Stabilization – Removal of light hydrocarbons to make crude safe for transport.
Natural Gas Processing – Series of steps to purify natural gas.
CO2 Pipeline – Transport of captured carbon dioxide for sequestration or use.
Sulfur Recovery – Conversion of H2S to elemental sulfur (e.g., Claus process).
MEG Treatment – Processing of Monoethylene Glycol used for hydrate prevention.
Utilities Upgrade – Enhancements to plant utilities (steam, air, water).
Tank Farm – Storage facility for large volumes of liquids.
Gas Lift – Injection of gas to lift oil in production wells.
Compressor Stations – Facilities to boost pressure in gas pipelines.
Refinery Expansion – Projects to increase capacity or efficiency of refineries.
Offsite Facilities – Support systems such as flare, cooling water, and utility buildings.
Project & Design Management
Proposal Engineering – Preparing bids and technical solutions for clients.
Cost Estimation – Projecting capital and operational expenses.
MTO/BOQ – Material Take-Offs and Bill of Quantities for procurement.
Vendor Coordination – Liaising with suppliers for technical and delivery issues.
OEM Interface – Managing communication with Original Equipment Manufacturers.
Procurement Support – Assisting in selection and acquisition of equipment/materials.
Project Scheduling – Timelines and critical path method planning.
Project Planning – Defining project scope, deliverables, and timelines.
EPC Execution – Engineering, Procurement, and Construction project delivery.
Interdisciplinary Coordination – Aligning different engineering disciplines.
Stakeholder Communication – Engaging with internal and external parties.
Action Closeout – Completing and verifying action items from reviews.
Risk Mitigation – Reducing technical and commercial risks.
QA/QC Review – Quality assurance and quality control of deliverables.
Design Review – Verification of technical drawings and calculations.
Brownfield Modifications – Upgrades or modifications to existing plants.
Retrofit Projects – Updating outdated systems with new technologies.
Revamp Studies – Evaluating existing facilities for upgrades.
As-Built Documentation – Final drawings reflecting actual installation.
Technical Bid Evaluation – Assessment of vendor bids against technical specs.
Geographic / Client / Company Tags
Petroleum Development Oman (PDO) – Major oil and gas operator in Oman.
Daleel Petroleum – Oman-based upstream oil exploration company.
Qatar Petroleum – National oil company of Qatar.
RasGas – Qatari natural gas producing company.
Suncor – Canadian integrated energy company focused on oil sands.
CNRL (Canadian Natural Resources Ltd.) – One of Canada's largest oil and gas producers.
Cenovus – Canadian oil company known for SAGD and oil sands.
Husky – Integrated Canadian energy company.
Shell – Global energy and petrochemical company.
National Refinery Ltd – Pakistani company specializing in refining and lubricants.
