telnet [/R] host [port] /? !!! establishes a Telnet protocol connection to a specified Telnet Client !!!

help
hostname !!! Name of the host in AP mode !!!
hostname&prcstate !!! Name of the host with state in AP mode !!!
time /t !!! the current system clock !!!
date /t !!! the current system date !!!

hwcls !!! Hardware Configuration, List..DHCP:IP assignment method for the boards !!!
hwmls -s 12 -l !!! HW manager, List.. display info of board in slot 12 !!!
caclp !!! Calendar Function, System Clock time and time zone information. Print !!!
alacp; !!! Alarm Functions, Alarm Category Data, Print !!!
mml -cp cp1 !!! MML Session — Single-Sided CP or CP Group !!!
alclp; !!! ALARM FUNCTIONS, ALARM CLASS INDICATION, PRINT !!!
exalls -l !!! External Alarm Receiver Data, List !!!
allip; !!! Alarm Functions, Alarm List, Print !!!
cpls or cpls -l !!! Central Processor (CP) identification table !!!
cpgls !!! list all defined Central Processor (CP) groups in the Network Element (NE) !!!
plldp -l !!! Processor Load Data, Print !!!

C7LTP:LS=ALL; !!! CCITT7, Link Set State, Print !!!

C7LDP:LS=ALL; !!! CCITT7, Link Set Data, Print !!!

S7LSP: LSN=ALL; !!! SS7, LINK SET , PRINT !!!

S7ssp:sp=2-2581; !!! CCITT7, SCCP Remote Subsystem Supervision, Print !!!
S7SPP:SP=ALL; !!! SS7, MTP NETWORK SIGNALLING POINT DATA, PRINT !!!

EXROP:r=all; !!! Exchange Data Route Data, Print !!!

EXROP:dety=MRALT; !!! Exchange Data Route-BSCs Data, Print !!!
STRDP:r=OUHB01O; !!! Device State for Routes Details, Print !!!
STRDP:R=CAN25,STATE=BLOC;
STRDP:R=CAN25&BT1,STATE=BUSY&BLOC;
STRDP:DETY=MRALT,STATE=IDLE;
STRSP : r=OUHB01O ; !!! Device States for Routes Survey, Print !!!
STDEP:DEV=UPDR-44321; !!! Device States , Print !!!
STRSP:LOCAL,R=BTIN&BTOUT;
EXDEP:dev=MRALT-371649; !!! The device data for device MRALT-371649 !!!
EXDEP:R=KRROUTE,MISC1=4; !!! Device data for device CIC 4 inside the route KRROUTE !!!
EXDRP:DEV=MRALT-317; !!! Exchange Data, Device RP/EM Data, Print !!!

NTSTP:SNT=RTDMA-856&&-869; !!! Switching Network Terminal State, Print !!!

ntcop:snt= snttype-sntnumber; !!! Switching Network Terminal, Connection Data, Print !!!
ntcop:snt= RTDMA-11610;

EXASP:MCS=ALL; !!! Exchange Data, Automatic Meet Me Service Announcement Code Set, Print !!!

MGCEP:CELL=ALL; !!! Mobile Telephony, Cell, Print !!!

MGCEP:CELL=AIRPORT&CITY;
mgcep:lai=604-01-78;
MGLAP; !!! Mobile Telephony, Location Area, Print !!!
MGLAP:LAI=604-01-170;
MGOCP:CELL=ALL; !!! Mobile Telephony, Outer Cell, Print !!!
MGOCP:MSC=msc_neighbour;
MGOCI:CELL=LAC_106, lai=604-01-106, MSC=HMSS1MH; !!! MOBILE TELEPHONY, OUTER CELL,
INITIATE !!!

M3RSP:DEST=all; !!! M3UA, Routing Specification for all defined destinations , Print !!!
M3RSP:DEST=2-3000; !!! M3UA, Routing Specification by destination point code , Print !!!
M3RSP:SAID=ASSOC1; !!! M3UA, Routing Specification by SCTP association identity, Print !!!

M3ASP; !!! M3UA, for all defined SCTP associations State, Print !!!
M3ASP:SAID=ASSOC1; !!! M3UA, Association State, Print !!!

IHCLP:INTERNAL; !!! IP Transport, SCTP Association Connection List, Print !!!

IHCLP:EPID=ALL,SAID=ALL;
IHCLP:SAID=ASSOC1;
IHCLP:LIP="141.137.75.16";

ANBSP :b=52-0524 ; !!! Analysis of B-Number, Specification, Print !!!

ANBSP:B=ALL,RC=17;

S7OPP; !!! SS7, OWN SIGNALLING POINT IDENTITY, PRINT !!!

C7OPP:NI=ALL; !!! CCITT7, Own Signalling Point Parameters, Print !!!
C7HPP:HPC=ALL; !!! CCITT7, Hosted Signalling Point ALL SPx, Print !!!

alist !!! AP Alarms Listing !!!

alist-i [indexNumber] !!! AP Alarms Listing..with the indicated specificProblem !!!
alist-s A1 !!! AP Alarms Listing..with the severity of the alarm AXE standard (A1, A2,
A3, O1, O2, or CEASING). !!!

mgsbp; !!! Mobile Telephony, Mobile Subscriber Survey on MSC-S Blade, Print !!!

mgtrp:MSISDN=msisdn; !!! MOBILE TELEPHONY, MSISDN TO IMSI TRANSLATION, PRINT !!!

mgbip:MSISDN=msisdn; !!! Mobile Telephony, Primary and Buddy MSC-S Blade Identity of Mobile
Subscriber, Print !!!

ctrai:MSISDN=msisdn; !!! Initiates tracing of the switching path for connection of the devices
[SWDEV] in the switching network !!!

afpls !!! AP File Processing, Files, List.. defined transfer queues in the AFP function table !!!
afpls -ls TQBGW1 !!! Display all reported files or directories, and attributes in defined transfer queues
(CDRs of charging ) !!!
afpls -ls TQBGW1
afpls
afpls -p TQBGW2
afpls -l TQBGW2
cd /d K:\ACS\DATA\RTR\REPORTED\TQBGW2
afpls -ls TQBGW2
cd /d K:\ACS\DATA\RTR\REPORTED\TQBGW1
dir
cdhver BGW1
EVENT REPORTING THRESHOLD REACHED
This alarm indicates that the number of stored reports reaches a threshold TH, TH1 or TH2 for a
specified event number.

In order to initialize these thresholds, command to use:

Event Reporting Alarm, Reset

/ \
|enum...|/ \
EREAR:ENUM=+ +|,NP|;
|ALL |\ /
\ /
ENUM: Event number

NP: Printing of the reports is not required

Exemple: erear:enum=1034;
erear:enum=1165;
erear:enum=1166;

Pour consulter les seuils de rapports attribués à un événement donné : ereap : enum=xxxx ;